[U-Boot] NAND DMA timed out with i.mx boot source code.

[Fabio Estevam]

On Thu, Jun 28, 2012 at 11:24 PM, alex <laub923 at 163.com> wrote:
> No network on my board, so nand_update_full can't be run. I use command "kobs-ng init u-boot.sb" to update(default: > /dev/mtd0) or mfgtools from freescale. I just add support NAND to mx28evk configs file copied from m28evk configs.

There is NAND support on mx28evk.h in mainline. Looks like you are
using old code.

Please use the latest mainline code and try again.

Are you able to boot from SD card on your board?