[U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards

[Simon Glass]

Add calls to the LCD driver from Nvidia board code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 board/nvidia/common/board.c |   21 ++++++++++++++++++++-
 1 files changed, 20 insertions(+), 1 deletions(-)

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 2e22133..7666691 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -29,6 +29,7 @@
 #include <asm/arch/sys_proto.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/display.h>
 #include <asm/arch/clk_rst.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/emc.h>
@@ -87,6 +88,9 @@ int board_init(void)
 {
 	__maybe_unused int err;
 
+#ifdef CONFIG_VIDEO_TEGRA2
+	tegra_lcd_check_next_stage(gd->blob, 0);
+#endif
 	/* Do clocks and UART first so that printf() works */
 	clock_init();
 	clock_verify();
@@ -122,6 +126,9 @@ int board_init(void)
 	pin_mux_usb();
 	board_usb_init(gd->fdt_blob);
 #endif
+#if defined(CONFIG_VIDEO_TEGRA)
+	tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
 
 #ifdef CONFIG_TEGRA2_LP0
 	/* prepare the WB code to LP0 location */
@@ -142,6 +149,18 @@ int board_early_init_f(void)
 #else
 	gpio_config_uart();
 #endif
-	return 0;
+#if defined(CONFIG_VIDEO_TEGRA)
+	tegra_lcd_early_init(gd->fdt_blob);
+#endif
+return 0;
 }
 #endif	/* EARLY_INIT */
+
+int board_late_init(void)
+{
+#ifdef CONFIG_VIDEO_TEGRA
+	/* Make sure we finish initing the LCD */
+	tegra_lcd_check_next_stage(gd->fdt_blob, 1);
+#endif
+	return 0;
+}
-- 
1.7.7.3