[U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation
mathieu.poirier at linaro.org
mathieu.poirier at linaro.org
Mon Jun 18 18:35:36 CEST 2012
From: "Mathieu J. Poirier" <mathieu.poirier at linaro.org>
Enabling timers and clocks in PRCMU and cleaning up mailbox.
Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: John Rigby <john.rigby at linaro.org>
---
arch/arm/cpu/armv7/u8500/Makefile | 2 +-
arch/arm/cpu/armv7/u8500/cpu.c | 41 +++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/u8500/prcmu.c | 30 ++++++++++++++++++++++
arch/arm/include/asm/arch-u8500/prcmu.h | 24 ++++++++++++++----
board/st-ericsson/u8500/u8500_href.c | 2 +-
include/configs/snowball.h | 1 +
6 files changed, 93 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile
index 77accde..ce8af96 100644
--- a/arch/arm/cpu/armv7/u8500/Makefile
+++ b/arch/arm/cpu/armv7/u8500/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = timer.o clock.o prcmu.o
+COBJS = timer.o clock.o prcmu.o cpu.o
SOBJS = lowlevel.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c
new file mode 100644
index 0000000..04f4b19
--- /dev/null
+++ b/arch/arm/cpu/armv7/u8500/cpu.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2012 Linaro Limited
+ * Mathieu Poirier <mathieu.poirier at linaro.org>
+ *
+ * Based on original code from Joakim Axelsson at ST-Ericsson
+ * (C) Copyright 2010 ST-Ericsson
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/prcmu.h>
+
+#ifdef CONFIG_ARCH_CPU_INIT
+/*
+ * SOC specific cpu init
+ */
+int arch_cpu_init(void)
+{
+ db8500_prcmu_init();
+
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c
index 119ead3..6187dcc 100644
--- a/arch/arm/cpu/armv7/u8500/prcmu.c
+++ b/arch/arm/cpu/armv7/u8500/prcmu.c
@@ -40,6 +40,8 @@
#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
+#define I2C_MBOX_BIT (1 << 5)
+
static int prcmu_is_ready(void)
{
int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
@@ -162,3 +164,31 @@ int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
return -1;
}
}
+
+void u8500_prcmu_enable(u32 *reg)
+{
+ writel(readl(reg) | (1 << 8), reg);
+}
+
+void db8500_prcmu_init(void)
+{
+ /* Enable timers */
+ writel(1 << 17, PRCM_TCR);
+
+ u8500_prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG);
+ u8500_prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG);
+ u8500_prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG);
+ /* PER4CLK does not exist */
+ u8500_prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG);
+ u8500_prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG);
+ /* Only exists in ED but is always ok to write to */
+ u8500_prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG);
+
+ u8500_prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG);
+ u8500_prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG);
+
+ u8500_prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG);
+
+ /* Clean up the mailbox interrupts after pre-u-boot code. */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+}
diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h
index 0836983..1fd4d2a 100644
--- a/arch/arm/include/asm/arch-u8500/prcmu.h
+++ b/arch/arm/include/asm/arch-u8500/prcmu.h
@@ -27,12 +27,23 @@
#define I2C_RD_OK 2
#define I2CWRITE 0
-#define _PRCMU_TCDM_BASE U8500_PRCMU_TCDM_BASE
-#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC) /* 4 BYTES */
-
-#define PRCM_REQ_MB5 (_PRCMU_TCDM_BASE + 0xE44) /* 4 bytes */
-#define PRCM_ACK_MB5 (_PRCMU_TCDM_BASE + 0xDF4) /* 4 bytes */
+#define PRCMU_BASE U8500_PRCMU_BASE
+#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018)
+#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C)
+#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020)
+#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024)
+#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C)
+#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030)
+#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034)
+#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038)
+#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C)
+#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040)
+#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C)
+#define PRCM_TCR (PRCMU_BASE + 0x1C8)
+#define PRCM_REQ_MB5 (PRCMU_BASE + 0xE44)
+#define PRCM_ACK_MB5 (PRCMU_BASE + 0xDF4)
+#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE + 0xFFC)
/* Mailbox 5 Requests */
#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0)
#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1)
@@ -52,4 +63,7 @@
extern int prcmu_i2c_read(u8 reg, u16 slave);
extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data);
+void u8500_prcmu_enable(u32 *reg);
+void db8500_prcmu_init(void);
+
#endif /* __MACH_PRCMU_FW_V1_H */
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
index 6e3fc87..fe72684 100644
--- a/board/st-ericsson/u8500/u8500_href.c
+++ b/board/st-ericsson/u8500/u8500_href.c
@@ -26,8 +26,8 @@
#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
-#ifdef CONFIG_MMC
#include <asm/arch/prcmu.h>
+#ifdef CONFIG_MMC
#include "../../../drivers/mmc/arm_pl180_mmci.h"
#endif
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index 845db29..f959417 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -31,6 +31,7 @@
#define CONFIG_SNOWBALL 1
#define CONFIG_SYS_ICACHE_OFF 1
#define CONFIG_SYS_DCACHE_OFF 1
+#define CONFIG_ARCH_CPU_INIT 1
/*
* High Level Configuration Options
--
1.7.5.4
More information about the U-Boot
mailing list