[U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards
Allen Martin
amartin at nvidia.com
Fri Jun 8 23:16:01 CEST 2012
Add SPL options to tegra20 config files and enable SPL build for
tegra20 boards in boards.cfg
Signed-off-by: Allen Martin <amartin at nvidia.com>
---
boards.cfg | 18 ++++-----
include/configs/tegra20-common-post.h | 65 +++++++++++++++++++++++++++++++++
include/configs/tegra20-common.h | 18 ++++++++-
3 files changed, 91 insertions(+), 10 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index 8958ba2..de59585 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -233,10 +233,10 @@ s5pc210_universal arm armv7 universal_c210 samsung
smdk5250 arm armv7 smdk5250 samsung exynos
smdkv310 arm armv7 smdkv310 samsung exynos
trats arm armv7 trats samsung exynos
-harmony arm armv7 harmony nvidia tegra20
-seaboard arm armv7 seaboard nvidia tegra20
-ventana arm armv7 ventana nvidia tegra20
-whistler arm armv7 whistler nvidia tegra20
+harmony arm armv7:arm720t harmony nvidia tegra20
+seaboard arm armv7:arm720t seaboard nvidia tegra20
+ventana arm armv7:arm720t ventana nvidia tegra20
+whistler arm armv7:arm720t whistler nvidia tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
@@ -262,11 +262,11 @@ xaeniax arm pxa
zipitz2 arm pxa
colibri_pxa270 arm pxa - toradex
jornada arm sa1100
-plutux arm armv7 plutux avionic-design tegra20
-medcom arm armv7 medcom avionic-design tegra20
-tec arm armv7 tec avionic-design tegra20
-paz00 arm armv7 paz00 compal tegra20
-trimslice arm armv7 trimslice compulab tegra20
+plutux arm armv7:arm720t plutux avionic-design tegra20
+medcom arm armv7:arm720t medcom avionic-design tegra20
+tec arm armv7:arm720t tec avionic-design tegra20
+paz00 arm armv7:arm720t paz00 compal tegra20
+trimslice arm armv7:arm720t trimslice compulab tegra20
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
diff --git a/include/configs/tegra20-common-post.h b/include/configs/tegra20-common-post.h
index b535934..6b046bd 100644
--- a/include/configs/tegra20-common-post.h
+++ b/include/configs/tegra20-common-post.h
@@ -144,4 +144,69 @@
TEGRA20_DEVICE_SETTINGS \
BOOTCMDS_COMMON
+/* overrides for SPL build here */
+#ifdef CONFIG_SPL_BUILD
+
+/* remove devicetree support */
+#ifdef CONFIG_OF_CONTROL
+#undef CONFIG_OF_CONTROL
+#endif
+
+/* remove SERIAL_MULTI */
+#ifdef CONFIG_SERIAL_MULTI
+#undef CONFIG_SERIAL_MULTI
+#endif
+
+/* remove I2C support */
+#ifdef CONFIG_TEGRA_I2C
+#undef CONFIG_TEGRA_I2C
+#endif
+#ifdef CONFIG_CMD_I2C
+#undef CONFIG_CMD_I2C
+#endif
+
+/* remove MMC support */
+#ifdef CONFIG_MMC
+#undef CONFIG_MMC
+#endif
+#ifdef CONFIG_GENERIC_MMC
+#undef CONFIG_GENERIC_MMC
+#endif
+#ifdef CONFIG_TEGRA20_MMC
+#undef CONFIG_TEGRA20_MMC
+#endif
+#ifdef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MMC
+#endif
+
+/* remove partitions/filesystems */
+#ifdef CONFIG_DOS_PARTITION
+#undef CONFIG_DOS_PARTITION
+#endif
+#ifdef CONFIG_EFI_PARTITION
+#undef CONFIG_EFI_PARTITION
+#endif
+#ifdef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_EXT2
+#endif
+#ifdef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FAT
+#endif
+
+/* remove USB */
+#ifdef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI
+#endif
+#ifdef CONFIG_USB_EHCI_TEGRA
+#undef CONFIG_USB_EHCI_TEGRA
+#endif
+#ifdef CONFIG_USB_STORAGE
+#undef CONFIG_USB_STORAGE
+#endif
+#ifdef CONFIG_CMD_USB
+#undef CONFIG_CMD_USB
+#endif
+
+#endif /* CONFIG_SPL_BUILD */
+
#endif /* __TEGRA20_COMMON_POST_H */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 731ab52..17c710e 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -183,7 +183,7 @@
#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_TEXT_BASE 0x00108000
+#define CONFIG_SYS_TEXT_BASE 0x00208000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
@@ -195,4 +195,20 @@
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_TEXT_BASE 0x00108000
+#define CONFIG_SPL_MAX_SIZE 0x00078000
+#define CONFIG_SYS_SPL_MALLOC_START 0x00180000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
+#define CONFIG_SPL_STACK 0x0019fffc
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
+
#endif /* __TEGRA20_COMMON_H */
--
1.7.9.5
More information about the U-Boot
mailing list