[U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t
Allen Martin
amartin at nvidia.com
Mon Jun 11 21:01:32 CEST 2012
On Sat, Jun 09, 2012 at 11:32:08AM -0700, Simon Glass wrote:
> Hi Allen,
>
> On Fri, Jun 8, 2012 at 2:16 PM, Allen Martin <amartin at nvidia.com<mailto:amartin at nvidia.com>> wrote:
> Add support for tegra20 arm7 boot processor. This processor is used
> to power on the Cortex A9 and transfer control to it.
>
> Signed-off-by: Allen Martin <amartin at nvidia.com<mailto:amartin at nvidia.com>>
> ---
> arch/arm/cpu/arm720t/cpu.c | 2 +
> arch/arm/cpu/arm720t/interrupts.c | 4 +
> arch/arm/cpu/arm720t/start.S | 6 +-
> .../{tegra20-common => arm720t/tegra20}/Makefile | 22 +-
> arch/arm/cpu/arm720t/tegra20/board.h | 25 ++
> arch/arm/cpu/arm720t/tegra20/cpu.c | 259 ++++++++++++++++++++
> arch/arm/cpu/arm720t/tegra20/cpu.h | 99 ++++++++
> arch/arm/cpu/arm720t/tegra20/spl.c | 133 ++++++++++
> arch/arm/cpu/tegra20-common/Makefile | 2 +-
> arch/arm/include/asm/arch-tegra20/hardware.h | 29 +++
>
> I think this (empty) file is required by arm720t/cpu.c, right?
Yes.
>
> You are using arm720t here, but your chip is actually an ARM7TDMI. I
> suppose that doesn't matter since there is no cache and they share
> the same core. But perhaps a comment would be useful explaining this
> difference and how it was convenient to use the same code.
Good point, will do.
-Allen
--
nvpublic
More information about the U-Boot
mailing list