[U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code

Tom Rini trini at ti.com
Wed Jun 27 20:23:06 CEST 2012


On Mon, Jun 25, 2012 at 09:40:57PM +0900, Tetsuyuki Kobayashi wrote:

> Interrupts and exceptions doesn't work in relocated code.
> It badly use IRQ_STACK_START_IN in rom area as interrupt stack.
> It is because the vecotr table is not moved to ram area.
> This patch moves vector table before jumping relocated code.
> 
> Signed-off-by: Tetsuyuki Kobayashi <koba at kmckk.co.jp>
> ---
>  arch/arm/cpu/armv7/start.S |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index 52f7f6e..5098f7b 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -277,6 +277,18 @@ jump_2_ram:
>  	mcr     p15, 0, r0, c7, c10, 4	@ DSB
>  	mcr     p15, 0, r0, c7, c5, 4	@ ISB
>  #endif
> +/*
> + * Move vector table
> + */
> +#if !defined(CONFIG_TEGRA2)
> +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
> +	/* Set vector address in CP15 VBAR register */
> +	ldr     r0, =_start
> +	add     r0, r0, r9
> +	mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
> +#endif
> +#endif /* !Tegra2 */
> +	
>  	ldr	r0, _board_init_r_ofs
>  	adr	r1, _start
>  	add	lr, r0, r1

I think this code should get boot tested on a few platforms to make sure
it's OK.  As such, I've tried on am335x and omap3 and they're still
fine.

Tested-by: Tom Rini <trini at ti.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120627/3f0f19cb/attachment.pgp>


More information about the U-Boot mailing list