[U-Boot] [PATCH v2 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138

[Prabhakar Lad]

From: Lad, Prabhakar <prabhakar.lad at ti.com>

This patch adds support for MMC/SD on DA850/OMAP-L138.

Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj at ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli at ti.com>
---
 Changes for v2:
 1:Removed CONFIG_MMC_MBLOCK config which was never used.
 2:Added comment while enabling MMC commands.
 3:Moved GP0[11] to the board file da850evm.c

 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c   |   11 ++++++++
 arch/arm/include/asm/arch-davinci/hardware.h    |    1 +
 arch/arm/include/asm/arch-davinci/pinmux_defs.h |    3 ++
 board/davinci/da8xxevm/da850evm.c               |   32 +++++++++++++++++++++++
 include/configs/da850evm.h                      |   17 ++++++++++++
 5 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
index fa07fb5..ad600b2 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
@@ -169,3 +169,14 @@ const struct pinmux_config emifa_pins_nor[] = {
 	{ pinmux(12), 1, 6 }, /* EMA_A[1] */
 	{ pinmux(12), 1, 7 }, /* EMA_A[0] */
 };
+
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins[] = {
+	{ pinmux(10), 2, 0 },	/* MMCSD0_CLK */
+	{ pinmux(10), 2, 1 },	/* MMCSD0_CMD */
+	{ pinmux(10), 2, 2 },	/* MMCSD0_DAT_0 */
+	{ pinmux(10), 2, 3 },	/* MMCSD0_DAT_1 */
+	{ pinmux(10), 2, 4 },	/* MMCSD0_DAT_2 */
+	{ pinmux(10), 2, 5 },	/* MMCSD0_DAT_3 */
+	/* DA850 supports only 4-bit mode, remaining pins are not configured */
+};
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index b145c6e..f6b7a2c 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -446,6 +446,7 @@ struct davinci_pllc_regs {
 #define DAVINCI_SPI1_CLKID  (cpu_is_da830() ? 2 : ASYNC3)
 /* Clock IDs */
 enum davinci_clk_ids {
+	DAVINCI_MMCSD_CLKID = 2,
 	DAVINCI_SPI0_CLKID = 2,
 	DAVINCI_UART2_CLKID = 2,
 	DAVINCI_MMC_CLKID = 2,
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
index 07aceaa..0db1e40 100644
--- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
@@ -48,4 +48,7 @@ extern const struct pinmux_config emifa_pins_cs4[1];
 extern const struct pinmux_config emifa_pins_nand[12];
 extern const struct pinmux_config emifa_pins_nor[43];
 
+/* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins[6];
+
 #endif
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 004d5ad..88337ff 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -36,6 +36,11 @@
 #include <asm/errno.h>
 #include <hwconfig.h>
 
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_DRIVER_TI_EMAC
@@ -204,11 +209,32 @@ int misc_init_r(void)
 	return 0;
 }
 
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+	.host_caps = MMC_MODE_4BIT,     /* DA850 supports only 4-bit SD/MMC */
+	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.version = MMC_CTLR_VERSION_2,
+};
+
+int board_mmc_init(bd_t *bis)
+{
+	mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
+
+	/* Add slot-0 to mmc subsystem */
+	return davinci_mmc_init(bis, &mmc_sd0);
+}
+#endif
+
 static const struct pinmux_config gpio_pins[] = {
 #ifdef CONFIG_USE_NOR
 	/* GP0[11] is required for NOR to work on Rev 3 EVMs */
 	{ pinmux(0), 8, 4 },	/* GP0[11] */
 #endif
+#ifdef CONFIG_DAVINCI_MMC
+	/* GP0[11] is required for SD to work on Rev 3 EVMs */
+	{ pinmux(0),  8, 4 },	/* GP0[11] */
+#endif
 };
 
 const struct pinmux_resource pinmuxes[] = {
@@ -236,6 +262,9 @@ const struct pinmux_resource pinmuxes[] = {
 	PINMUX_ITEM(emifa_pins_nor),
 #endif
 	PINMUX_ITEM(gpio_pins),
+#ifdef CONFIG_DAVINCI_MMC
+	PINMUX_ITEM(mmc0_pins),
+#endif
 };
 
 const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
@@ -246,6 +275,9 @@ const struct lpsc_resource lpsc[] = {
 	{ DAVINCI_LPSC_EMAC },	/* image download */
 	{ DAVINCI_LPSC_UART2 },	/* console */
 	{ DAVINCI_LPSC_GPIO },
+#ifdef CONFIG_DAVINCI_MMC
+	{ DAVINCI_LPSC_MMC_SD },
+#endif
 };
 
 const int lpsc_size = ARRAY_SIZE(lpsc);
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 989472b..8b4fea1 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -313,6 +313,23 @@
 #undef CONFIG_CMD_ENV
 #endif
 
+/* SD/MMC configuration */
+#define CONFIG_MMC
+#define CONFIG_DAVINCI_MMC_SD1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DAVINCI_MMC
+
+/*
+ * Enable MMC commands only when
+ * MMC support is present
+ */
+#ifdef CONFIG_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MMC
+#endif
+
 /* defines for SPL */
 #define CONFIG_SPL
 #define CONFIG_SPL_SPI_SUPPORT
-- 
1.7.4.1