[U-Boot] [PATCH v2 4/4] ARM: add support for d2 Network v2
Simon Guinot
simon.guinot at sequanux.org
Wed Jun 6 01:16:53 CEST 2012
This patch adds support for the LaCie board d2 Network v2 which share
a lot of hardware caracteristics with the 2Big Network v2.
- CPU: Marvell 88F6281 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- 2 SATA ports: internal and eSATA
- Gigabit ethernet: PHY Marvell 88E1116R
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 power switch
- 1 SATA LED (bi-color, blue and red)
Signed-off-by: Simon Guinot <simon.guinot at sequanux.org>
---
No changes for v2.
boards.cfg | 1 +
include/configs/lacie_kw.h | 10 ++++++++--
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index 3f68fe5..418bb94 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -142,6 +142,7 @@ km_kirkwood arm arm926ejs km_arm keymile
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI,KM_RECONFIG_XLX
mgcoge3un arm arm926ejs km_arm keymile kirkwood
portl2 arm arm926ejs km_arm keymile kirkwood
+d2net_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:D2NET_V2
inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2
net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2
netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index ff92fda..6c11b73 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -36,6 +36,9 @@
#elif defined(CONFIG_NETSPACE_MAX_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
#define CONFIG_IDENT_STRING " NS Max v2"
+#elif defined(CONFIG_D2NET_V2)
+#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
+#define CONFIG_IDENT_STRING " D2 v2"
#elif defined(CONFIG_NET2BIG_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
#define CONFIG_IDENT_STRING " 2Big v2"
@@ -106,7 +109,9 @@
#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
-#if defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_D2NET_V2)
+#define CONFIG_SYS_PROMPT "d2v2> "
+#elif defined(CONFIG_NET2BIG_V2)
#define CONFIG_SYS_PROMPT "2big2> "
#else
#define CONFIG_SYS_PROMPT "ns2> "
@@ -126,7 +131,8 @@
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
+ defined(CONFIG_NET2BIG_V2)
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
#endif /* CONFIG_MVSATA_IDE */
--
1.7.9.5
More information about the U-Boot
mailing list