[U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet

Ashok ashokkourla2000 at gmail.com
Fri Jun 15 15:48:57 CEST 2012


 

Use the same name as defined in the datasheet.
DSP_CLK -> DISP_CLK

Signed-off-by: Ashok Kumar Reddy Kourla <ashokkourla2000 at gmail.com>
---
 arch/arm/include/asm/arch-mx6/mx6x_pins.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index afaa068..377d97f 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -530,8 +530,8 @@ enum {
 	MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16	= IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
 	MX6Q_PAD_EIM_BCLK__GPIO_6_31		= IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
 	MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31	= IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16	= IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
-- 
1.7.0.4


More information about the U-Boot mailing list