[U-Boot] [PATCH 0/6] further updates for keymile powerpc 83xx boards

Kim Phillips kim.phillips at freescale.com
Sat Jun 16 00:22:45 CEST 2012


On Fri, 4 May 2012 10:55:52 +0200
Holger Brunck <holger.brunck at keymile.com> wrote:

> This patchserie provides further updates for km ppc 83xx boards. One
> serie is already posted but until now not committed. This patch serie
> therefore is made on top of the first serie:
> http://lists.denx.de/pipermail/u-boot/2012-March/120694.html
> 
> Beside some enhancements for kmcoge5ne, there are two common features
> for keymile boards changed. This is the change in the bootlimit and
> the addition of the check of the SW in a test_bank. 
> 
> Only km code is changed, there is no change in common u-boot code.
> 
> Holger Brunck (1):
>   km/common: increase bootlimit to 3
> 
> Stefan Bigler (1):
>   powerpc/83xx/km: added missing enable of application buffer
> 
> Thomas Herzmann (4):
>   km/common: fixed error in ethaddr (1-byte-shift)
>   powerpc/83xx: configure CONFIG_POST for kmcoge5ne
>   powerpc/83xx/km: readout dip_switch on kmcoge5ne
>   km/common: check test_bank and testpin for testboot
> 
>  board/keymile/common/common.c       |   36 +++++++++++++++++++++++++
>  board/keymile/common/common.h       |    8 +++++-
>  board/keymile/common/ivm.c          |    2 +-
>  board/keymile/km83xx/km83xx.c       |   50 +++++++++++++++++++++++++++++++++++
>  include/configs/km/keymile-common.h |    6 +++-
>  include/configs/km8360.h            |    8 +++++
>  6 files changed, 106 insertions(+), 4 deletions(-)

patches 1-6 out of 6 applied.

Thanks,

Kim



More information about the U-Boot mailing list