[U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver
Chander Kashyap
chander.kashyap at linaro.org
Tue Jun 12 08:14:59 CEST 2012
Hi,
On 11 June 2012 19:26, Rajeshwari Birje <rajeshwari.birje at gmail.com> wrote:
> Hi All,
>
> ccing Jaehoon Chung
>
> Regards,
> Rajeshwari Shinde.
>
>
> On Mon, Jun 11, 2012 at 6:18 PM, Rajeshwari Shinde
> <rajeshwari.s at samsung.com> wrote:
>> Add DWMMC driver support and resgister description for same.
>>
>> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
>> Signed-off-by: Terry Lambert <tlambert at chromium.org>
>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
>> ---
>> Changes in V2:
>> - Incorporated comments from Jaehung Chung.
>> - Renamed MSHCI to DWMMC through out the driver.
>> - Renamed files to exynos_dwmmc from exynos_mshc.
>> - Removed major hard codings of values.
>> - Wrote dw_mci_writel and dw_mci_readl functions for writel and readl.
>> - Removed structure of registers and defined each one separately.
>> orch/arm/include/asm/arch-exynos/exynos_dwmmc.h | 229 +++++++++
>> drivers/mmc/Makefile | 1 +
>> drivers/mmc/exynos_dwmmc.c | 566 +++++++++++++++++++++++
>> 3 files changed, 796 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>> create mode 100644 drivers/mmc/exynos_dwmmc.c
>>
>> diff --git a/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h b/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>> new file mode 100644
>> index 0000000..349bd75
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>> @@ -0,0 +1,229 @@
>> +/*
>> + * (C) Copyright 2012 SAMSUNG Electronics
>> + * Abhilash Kesavan <a.kesavan at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + */
>> +#ifndef __ASM_ARCH_COMMON_DWMMC_H
>> +#define __ASM_ARCH_COMMON_DWMMC_H
>> +
>> +#include <asm/arch/pinmux.h>
>> +
>> +#ifndef __ASSEMBLY__
>> +struct dw_mci_host {
>> + void *ioaddr;
>> + unsigned int clock; /* Current clock in MHz */
>> + enum periph_id peripheral;
>> + unsigned int verid; /* SDHCI spec. version */
>> + unsigned int data_offset; /* DATA offset */
>> +};
>> +
>> +/*
>> + * Struct idma
>> + * Holds the descriptor list
>> + */
>> +struct dw_mci_idmac {
>> + u32 des0;
>> + u32 des1;
>> + u32 des2;
>> + u32 des3;
>> +};
>> +
#endif
>> +/* Control Register Register */
>> +#define DWMCI_CONTROL 0x00
>> +#define CTRL_RESET (0x1 << 0)
>> +#define FIFO_RESET (0x1 << 1)
>> +#define DMA_RESET (0x1 << 2)
>> +#define DMA_ENABLE (0x1 << 5)
>> +#define SEND_AS_CCSD (0x1 << 10)
>> +#define ENABLE_IDMAC (0x1 << 25)
>> +
>> +/* Power Enable Register */
>> +#define DWMCI_PWREN 0x04
>> +#define POWER_ENABLE (0x1 << 0)
>> +
>> +#define DWMCI_CLKDIV 0x08
>> +#define DWMCI_CLKSRC 0x0c
>> +
>> +/* Clock Enable Register */
>> +#define DWMCI_CLKENA 0x10
>> +#define CLK_ENABLE (0x1 << 0)
>> +#define CLK_DISABLE (0x0 << 0)
>> +
>> +/* Timeout Register */
>> +#define DWMCI_TMOUT 0x14
>> +#define TMOUT_MAX 0xffffffff
>> +
>> +/* Card Type Register */
>> +#define DWMCI_CTYPE 0x18
>> +#define PORT0_CARD_WIDTH1 0
>> +#define PORT0_CARD_WIDTH4 (0x1 << 0)
>> +#define PORT0_CARD_WIDTH8 (0x1 << 16)
>> +
>> +#define DWMCI_BLKSIZE 0x1c
>> +#define DWMCI_BYTCNT 0x20
>> +
>> +/* Interrupt Mask Register */
>> +#define DWMCI_INTMASK 0x24
>> +#define INTMSK_ALL 0xffffffff
>> +#define INTMSK_RE (0x1 << 1)
>> +#define INTMSK_CDONE (0x1 << 2)
>> +#define INTMSK_DTO (0x1 << 3)
>> +#define INTMSK_DCRC (0x1 << 7)
>> +#define INTMSK_RTO (0x1 << 8)
>> +#define INTMSK_DRTO (0x1 << 9)
>> +#define INTMSK_HTO (0x1 << 10)
>> +#define INTMSK_FRUN (0x1 << 11)
>> +#define INTMSK_HLE (0x1 << 12)
>> +#define INTMSK_SBE (0x1 << 13)
>> +#define INTMSK_ACD (0x1 << 14)
>> +#define INTMSK_EBE (0x1 << 15)
>> +
>> +#define DWMCI_CMDARG 0x28
>> +
>> +/* Command Register */
>> +#define DWMCI_CMD 0x2c
>> +#define CMD_RESP_EXP_BIT (0x1 << 6)
>> +#define CMD_RESP_LENGTH_BIT (0x1 << 7)
>> +#define CMD_CHECK_CRC_BIT (0x1 << 8)
>> +#define CMD_DATA_EXP_BIT (0x1 << 9)
>> +#define CMD_RW_BIT (0x1 << 10)
>> +#define CMD_SENT_AUTO_STOP_BIT (0x1 << 12)
>> +#define CMD_WAIT_PRV_DAT_BIT (0x1 << 13)
>> +#define CMD_SEND_CLK_ONLY (0x1 << 21)
>> +#define CMD_USE_HOLD_REG (0x1 << 29)
>> +#define CMD_STRT_BIT (0x1 << 31)
>> +#define CMD_ONLY_CLK (CMD_STRT_BIT | CMD_SEND_CLK_ONLY | \
>> + CMD_WAIT_PRV_DAT_BIT)
>> +
>> +#define DWMCI_RESP0 0x30
>> +#define DWMCI_RESP1 0x34
>> +#define DWMCI_RESP2 0x38
>> +#define DWMCI_RESP3 0x3c
>> +
>> +#define DWMCI_MINTSTS 0x40
>> +
>> +/* Raw Interrupt Register */
>> +#define DWMCI_RINTSTS 0x44
>> +#define DATA_ERR (INTMSK_EBE | INTMSK_SBE | INTMSK_HLE | \
>> + INTMSK_FRUN | INTMSK_EBE | INTMSK_DCRC)
>> +#define DATA_TOUT (INTMSK_HTO | INTMSK_DRTO)
>> +
>> +/* Status Register */
>> +#define DWMCI_STATUS 0x48
>> +#define DATA_BUSY (0x1 << 9)
>> +
>> +/* FIFO Threshold Watermark Register */
>> +#define DWMCI_FIFOTH 0x4c
>> +#define TX_WMARK (0xFFF << 0)
>> +#define RX_WMARK (0xFFF << 16)
>> +#define MSIZE_MASK (0x7 << 28)
>> +
>> +#define DWMCI_CDETECT 0x50
>> +#define DWMCI_WRTORT 0x54
>> +#define DWMCI_GPIO 0x58
>> +#define DWMCI_TCBCNT 0x5c
>> +#define DWMCI_TBBCNT 0x60
>> +#define DWMCI_DEBENCE 0x64
>> +#define DWMCI_USRID 0x68
>> +#define DWMCI_VERID 0x6c
>> +#define DWMCI_HCON 0x70
>> +#define DWMCI_UHS_REG 0x74
>> +#define DWMCI_RST_n 0x78
>> +
>> +/* DW DMA Mutiple Transaction Size */
>> +#define MSIZE_8 (2 << 28)
>> +
>> +/* Bus Mode Register */
>> +#define DWMCI_BMOD 0x80
>> +#define BMOD_IDMAC_RESET (0x1 << 0)
>> +#define BMOD_IDMAC_FB (0x1 << 1)
>> +#define BMOD_IDMAC_ENABLE (0x1 << 7)
>> +
>> +#define DWMCI_PLDMND 0x84
>> +#define DWMCI_DBADDR 0x88
>> +
>> +/* IDMAC bits */
>> +#define DWMCI_IDSTS 0x8c
>> +#define DWMCI_IDMAC_OWN (0x1 << 31)
>> +#define DWMCI_IDMAC_CH (0x1 << 4)
>> +#define DWMCI_IDMAC_FS (0x1 << 3)
>> +#define DWMCI_IDMAC_LD (0x1 << 2)
>> +
>> +#define DWMCI_IDINTEN 0x90
>> +#define DWMCI_DSCADDR 0x94
>> +#define DWMCI_BUFADDR 0x98
>> +
>> +/* CLKSEL bits*/
>> +#define DWMCI_CLKSEL 0x9c
>> +#define SELCLK_SAMPLE_1PHASE_Shift (0x1 << 0)
>> +#define SELCLK_DRV_3PHASE_SHIFT (0x3 << 16)
>> +#define SELCLK_DRV_2PHASE_SHIFT (0x2 << 16)
>> +#define SELCLK_DIV_RATIO (0x3 << 24)
>> +
>> +#define DWMCI_CARDTHRCTL 0x100
>> +
>> +/*
>> + * Data offset is difference according to Version
>> + * Lower than 2.40a : data register offest is 0x100
>> + */
>> +#define DW_MMC_240A 0x240a
>> +#define DATA_OFFSET 0x100
>> +#define DATA_240A_OFFSET 0x200
>> +
>> +#define MAX_DWMMC_CLOCK 52000000 /* Max limit is 52MHz */
>> +#define MIN_DWMMC_CLOCK 400000 /* Lower limit is 400KHz */
>> +#define COMMAND_TIMEOUT 10000
>> +#define TIMEOUT_MS 100
>> +#define MAXCLKDIV 0xff
>> +
>> +/* Version ID register define */
>> +#define GET_VERID(x) ((x) & 0xFFFF)
>> +
>> +static inline void dw_mci_writel(struct dw_mci_host *host, u32 val, int reg)
>> +{
>> + writel(val, host->ioaddr + reg);
>> +}
>> +
>> +static inline void dw_mci_writew(struct dw_mci_host *host, u16 val, int reg)
>> +{
>> + writew(val, host->ioaddr + reg);
>> +}
>> +
>> +static inline void dw_mci_writeb(struct dw_mci_host *host, u8 val, int reg)
>> +{
>> + writeb(val, host->ioaddr + reg);
>> +}
>> +
>> +static inline u32 dw_mci_readl(struct dw_mci_host *host, int reg)
>> +{
>> + return readl(host->ioaddr + reg);
>> +}
>> +
>> +static inline u16 dw_mci_readw(struct dw_mci_host *host, int reg)
>> +{
>> + return readw(host->ioaddr + reg);
>> +}
>> +
>> +static inline u8 dw_mci_readb(struct dw_mci_host *host, int reg)
>> +{
>> + return readb(host->ioaddr + reg);
>> +}
>> +
>> +int dw_mci_init(enum periph_id periph_id, int bus_width);
>> +
>> +#endif /* __ASSEMBLY__ */
remove at this place after structure declaration.
>> +#endif /* __ASM_ARCH_COMMON_DWMMC_H */
>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
>> index c245352..cf0be05 100644
>> --- a/drivers/mmc/Makefile
>> +++ b/drivers/mmc/Makefile
>> @@ -27,6 +27,7 @@ LIB := $(obj)libmmc.o
>>
>> COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
>> COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
>> +COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dwmmc.o
>> COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
>> COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
>> COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
>> diff --git a/drivers/mmc/exynos_dwmmc.c b/drivers/mmc/exynos_dwmmc.c
>> new file mode 100644
>> index 0000000..96f6ceb
>> --- /dev/null
>> +++ b/drivers/mmc/exynos_dwmmc.c
>> @@ -0,0 +1,566 @@
>> +/*
>> + * (C) Copyright 2012 Samsung Electronics Co. Ltd
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <mmc.h>
>> +#include <asm/errno.h>
>> +#include <asm/arch/clk.h>
>> +#include <asm/arch/cpu.h>
>> +#include <asm/arch/exynos_dwmmc.h>
>> +#include <asm/arch/pinmux.h>
>> +
>> +/* support 4 mmc hosts */
>> +enum {
>> + MAX_MMC_HOSTS = 4
>> +};
>> +
>> +static struct mmc dw_mci_dev[MAX_MMC_HOSTS];
>> +static struct dw_mci_host dw_mci_host[MAX_MMC_HOSTS];
>> +static int num_devs;
>> +
>> +/**
>> + * Set bits of DWMMC host control register.
>> + *
>> + * @param host DWMMC host
>> + * @param bits bits to be set
>> + * @return 0 on success, TIMEOUT on failure
>> + */
>> +static int dw_mci_setbits(struct dw_mci_host *host, unsigned int bits)
>> +{
>> + ulong start;
>> +
>> + setbits_le32(host->ioaddr + DWMCI_CONTROL, bits);
>> +
>> + start = get_timer(0);
>> + while (dw_mci_readl(host, DWMCI_CONTROL) & bits) {
>> + if (get_timer(start) > TIMEOUT_MS) {
>> + debug("Set bits failed\n");
>> + return TIMEOUT;
>> + }
>> + }
>> + return 0;
>> +}
>> +
>> +/**
>> + * Reset DWMMC host control register.
>> + *
>> + * @param host DWMMC host
>> + * @return 0 on success, TIMEOUT on failure
>> + */
>> +static int dw_mci_reset_all(struct dw_mci_host *host)
>> +{
>> + ulong start;
>> +
>> + /*
>> + * Before we reset ciu check the DATA0 line. If it is low and
>> + * we resets the ciu then we might see some errors.
>> + */
>> + start = get_timer(0);
>> + while (dw_mci_readl(host, DWMCI_STATUS) & DATA_BUSY) {
>> + if (get_timer(start) > TIMEOUT_MS) {
>> + debug("Controller did not release"
>> + "data0 before ciu reset\n");
>> + return TIMEOUT;
>> + }
>> + }
>> + return dw_mci_setbits(host, CTRL_RESET | FIFO_RESET | DMA_RESET);
>> +}
>> +
>> +static void dw_mci_set_mdma_desc(u8 *desc_vir, u8 *desc_phy,
>> + unsigned int des0, unsigned int des1, unsigned int des2)
>> +{
>> + struct dw_mci_idmac *desc = (struct dw_mci_idmac *)desc_vir;
>> +
>> + desc->des0 = des0;
>> + desc->des1 = des1;
>> + desc->des2 = des2;
>> + desc->des3 = (unsigned int)desc_phy + sizeof(struct dw_mci_idmac);
>> +}
>> +
>> +static int dw_mci_prepare_data(struct dw_mci_host *host, struct mmc_data *data)
>> +{
>> + unsigned int i, data_cnt, des_flag, blksz;
>> + int err;
>> + ulong data_start, data_end;
>> + static struct dw_mci_idmac idmac_desc[0x10000];
>> + struct dw_mci_idmac *pdesc_dmac;
>> +
>> + err = dw_mci_setbits(host, FIFO_RESET);
>> + if (err) {
>> + debug("Fail to reset FIFO\n");
>> + return err;
>> + }
>> +
>> + pdesc_dmac = idmac_desc;
>> + blksz = data->blocksize;
>> + data_cnt = data->blocks;
>> +
>> + for (i = 0;; i++) {
>> + des_flag = (DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH);
>> + des_flag |= (i == 0) ? DWMCI_IDMAC_FS : 0;
>> + if (data_cnt <= 8) {
>> + des_flag |= DWMCI_IDMAC_LD;
>> + dw_mci_set_mdma_desc((u8 *)pdesc_dmac,
>> + (u8 *)virt_to_phys(pdesc_dmac),
>> + des_flag, blksz * data_cnt,
>> + (unsigned int)(virt_to_phys(data->dest)) +
>> + (unsigned int)(i * 0x1000));
>> + break;
>> + }
>> + /* max transfer size is 4KB per descriptor */
>> + dw_mci_set_mdma_desc((u8 *)pdesc_dmac,
>> + (u8 *)virt_to_phys(pdesc_dmac),
>> + des_flag, blksz * 8,
>> + virt_to_phys(data->dest) +
>> + (unsigned int)(i * 0x1000));
>> +
>> + data_cnt -= 8;
>> + pdesc_dmac++;
>> + }
>> +
>> + data_start = (ulong)idmac_desc;
>> + data_end = (ulong)pdesc_dmac;
>> + flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
>> +
>> + data_start = (ulong)data->dest;
>> + data_end = (ulong)(data->dest + data->blocks * data->blocksize);
>> + flush_dcache_range(data_start, data_end);
>> +
>> + dw_mci_writel(host, (unsigned int)virt_to_phys(idmac_desc),
>> + DWMCI_DBADDR);
>> +
>> + /* enable the Internal DMA Controller */
>> + setbits_le32(host->ioaddr + DWMCI_CONTROL, ENABLE_IDMAC |
>> + DMA_ENABLE);
>> + setbits_le32(host->ioaddr + DWMCI_BMOD, BMOD_IDMAC_ENABLE |
>> + BMOD_IDMAC_FB);
>> +
>> + dw_mci_writel(host, data->blocksize, DWMCI_BLKSIZE);
>> + dw_mci_writel(host, data->blocksize * data->blocks, DWMCI_BYTCNT);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_mci_set_transfer_mode(struct dw_mci_host *host,
>> + struct mmc_data *data)
>> +{
>> + int mode = CMD_DATA_EXP_BIT;
>> +
>> + if (data->blocks > 1)
>> + mode |= CMD_SENT_AUTO_STOP_BIT;
>> + if (data->flags & MMC_DATA_WRITE)
>> + mode |= CMD_RW_BIT;
>> +
>> + return mode;
>> +}
>> +
>> +/*
>> + * Sends a command out on the bus.
>> + *
>> + * @param mmc mmc device
>> + * @param cmd mmc_cmd to be sent on bus
>> + * @param data mmc data to be sent (optional)
>> + *
>> + * @return return 0 if ok, else error number
>> + */
>> +static int dw_mci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
>> + struct mmc_data *data)
>> +{
>> + struct dw_mci_host *host = mmc->priv;
>> +
>> + int flags = 0, i, err;
>> + unsigned int mask;
>> + ulong start, data_start, data_end;
>> +
>> + /*
>> + * We shouldn't wait for data inihibit for stop commands, even
>> + * though they might use busy signaling
>> + */
>> + start = get_timer(0);
>> + while (dw_mci_readl(host, DWMCI_STATUS) & DATA_BUSY) {
>> + if (get_timer(start) > COMMAND_TIMEOUT) {
>> + debug("timeout on data busy\n");
>> + return TIMEOUT;
>> + }
>> + }
>> +
>> + if (dw_mci_readl(host, DWMCI_RINTSTS)) {
>> + if ((dw_mci_readl(host, DWMCI_RINTSTS) &
>> + (INTMSK_CDONE | INTMSK_ACD)) == 0)
>> + debug("there are pending interrupts 0x%x\n",
>> + dw_mci_readl(host, DWMCI_RINTSTS));
>> + }
>> + /* It clears all pending interrupts before sending a command*/
>> + dw_mci_writel(host, INTMSK_ALL, DWMCI_RINTSTS);
>> +
>> + if (data) {
>> + err = dw_mci_prepare_data(host, data);
>> + if (err) {
>> + debug("fail to prepare data\n");
>> + return err;
>> + }
>> + }
>> +
>> + dw_mci_writel(host, cmd->cmdarg, DWMCI_CMDARG);
>> +
>> + if (data)
>> + flags = dw_mci_set_transfer_mode(host, data);
>> +
>> + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
>> + /* this is out of SD spec */
>> + return -1;
>> +
>> + if (cmd->resp_type & MMC_RSP_PRESENT) {
>> + flags |= CMD_RESP_EXP_BIT;
>> + if (cmd->resp_type & MMC_RSP_136)
>> + flags |= CMD_RESP_LENGTH_BIT;
>> + }
>> +
>> + if (cmd->resp_type & MMC_RSP_CRC)
>> + flags |= CMD_CHECK_CRC_BIT;
>> + flags |= (cmd->cmdidx | CMD_STRT_BIT | CMD_USE_HOLD_REG |
>> + CMD_WAIT_PRV_DAT_BIT);
>> +
>> + mask = dw_mci_readl(host, DWMCI_CMD);
>> + if (mask & CMD_STRT_BIT)
>> + debug("cmd busy, current cmd: %d", cmd->cmdidx);
>> +
>> + dw_mci_writel(host, flags, DWMCI_CMD);
>> + /* wait for command complete by busy waiting. */
>> + for (i = 0; i < COMMAND_TIMEOUT; i++) {
>> + mask = dw_mci_readl(host, DWMCI_RINTSTS);
>> + if (mask & INTMSK_CDONE) {
>> + if (!data)
>> + dw_mci_writel(host, mask, DWMCI_RINTSTS);
>> + break;
>> + }
>> + }
>> + /* timeout for command complete. */
>> + if (COMMAND_TIMEOUT == i) {
>> + debug("timeout waiting for status update\n");
>> + return TIMEOUT;
>> + }
>> +
>> + if (mask & INTMSK_RTO) {
>> + if (((cmd->cmdidx == MMC_CMD_SEND_EXT_CSD ||
>> + cmd->cmdidx == MMC_CMD_APP_CMD)) == 0) {
>> + debug("response timeout error: 0x%x cmd: %d\n",
>> + mask, cmd->cmdidx);
>> + }
>> + return TIMEOUT;
>> + } else if (mask & INTMSK_RE) {
>> + debug("response error: 0x%x cmd: %d\n", mask, cmd->cmdidx);
>> + return -1;
>> + }
>> + if (cmd->resp_type & MMC_RSP_PRESENT) {
>> + if (cmd->resp_type & MMC_RSP_136) {
>> + /* CRC is stripped so we need to do some shifting. */
>> + cmd->response[0] = dw_mci_readl(host,
>> + DWMCI_RESP3);
>> + cmd->response[1] = dw_mci_readl(host,
>> + DWMCI_RESP2);
>> + cmd->response[2] = dw_mci_readl(host,
>> + DWMCI_RESP1);
>> + cmd->response[3] = dw_mci_readl(host,
>> + DWMCI_RESP0);
>> + } else {
>> + cmd->response[0] = dw_mci_readl(host, DWMCI_RESP0);
>> + debug("\tcmd->response[0]: 0x%08x\n", cmd->response[0]);
>> + }
>> + }
>> +
>> + if (data) {
>> + while (!(mask & (DATA_ERR | DATA_TOUT | INTMSK_DTO)))
>> + mask = dw_mci_readl(host, DWMCI_RINTSTS);
>> + dw_mci_writel(host, mask, DWMCI_RINTSTS);
>> + if (data->flags & MMC_DATA_READ) {
>> + data_start = (ulong)data->dest;
>> + data_end = (ulong)data->dest +
>> + data->blocks * data->blocksize;
>> + invalidate_dcache_range(data_start, data_end);
>> + }
>> + if (mask & (DATA_ERR | DATA_TOUT)) {
>> + debug("error during transfer: 0x%x\n", mask);
>> + /* make sure disable IDMAC and IDMAC_Interrupts */
>> + dw_mci_writel(host, (dw_mci_readl(host, DWMCI_CONTROL) &
>> + ~(DMA_ENABLE | ENABLE_IDMAC)), DWMCI_CONTROL);
>> + /* mask all interrupt source of IDMAC */
>> + dw_mci_writel(host, 0, DWMCI_IDINTEN);
>> + return -1;
>> + } else if (mask & INTMSK_DTO) {
>> + debug("dwmmc dma interrupt end\n");
>> + } else {
>> + debug("unexpected condition 0x%x\n", mask);
>> + }
>> + /* make sure disable IDMAC and IDMAC_Interrupts */
>> + dw_mci_writel(host, (dw_mci_readl(host, DWMCI_CONTROL) &
>> + ~(DMA_ENABLE | ENABLE_IDMAC)),
>> + DWMCI_CONTROL);
>> + /* mask all interrupt source of IDMAC */
>> + dw_mci_writel(host, 0, DWMCI_IDINTEN);
>> + }
>> +
>> + udelay(100);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * ON/OFF host controller clock
>> + *
>> + * @param host pointer to dw_mci_host
>> + * @param val to enable/disable clock
>> + */
>> +static void dw_mci_clock_onoff(struct dw_mci_host *host, int val)
>> +{
>> +
>> + if (val)
>> + dw_mci_writel(host, CLK_ENABLE, DWMCI_CLKENA);
>> + else
>> + dw_mci_writel(host, CLK_DISABLE, DWMCI_CLKENA);
>> +
>> + dw_mci_writel(host, 0, DWMCI_CMD);
>> + dw_mci_writel(host, CMD_ONLY_CLK, DWMCI_CMD);
>> +}
>> +
>> +/*
>> + * change host controller clock
>> + *
>> + * @param host pointer to dw_mci_host
>> + * @param clock request clock
>> + */
>> +static void dw_mci_change_clock(struct dw_mci_host *host, uint clock)
>> +{
>> + int div;
>> + u32 sclk_mshc;
>> +
>> + if (clock == host->clock)
>> + return;
>> +
>> + /* If Input clock is higher than maximum mshc clock */
>> + if (clock > MAX_DWMMC_CLOCK) {
>> + debug("Input clock is too high\n");
>> + clock = MAX_DWMMC_CLOCK;
>> + }
>> +
>> + /* disable the clock before changing it */
>> + dw_mci_clock_onoff(host, CLK_DISABLE);
>> +
>> + /* get the clock division */
>> + if (host->peripheral == PERIPH_ID_SDMMC4)
>> + sclk_mshc = get_dw_mci_clk_div(host->peripheral) / 2;
>> + else
>> + sclk_mshc = get_dw_mci_clk_div(host->peripheral) / 4;
>> +
>> + /* CLKDIV */
>> + for (div = 1 ; div <= MAXCLKDIV; div++) {
>> + if ((sclk_mshc / (2 * div)) <= clock) {
>> + dw_mci_writel(host, div, DWMCI_CLKDIV);
>> + break;
>> + }
>> + }
>> +
>> + dw_mci_writel(host, 0, DWMCI_CMD);
>> + dw_mci_writel(host, CMD_ONLY_CLK, DWMCI_CMD);
>> +
>> + dw_mci_writel(host, dw_mci_readl(host, DWMCI_CMD) &
>> + (~CMD_SEND_CLK_ONLY),
>> + DWMCI_CMD);
>> +
>> + dw_mci_clock_onoff(host, CLK_ENABLE);
>> + host->clock = clock;
>> +}
>> +
>> +/*
>> + * Set ios for host controller clock
>> + *
>> + * This sets the card bus width and clksel
>> + */
>> +static void dw_mci_set_ios(struct mmc *mmc)
>> +{
>> + struct dw_mci_host *host = mmc->priv;
>> + int val;
>> +
>> + debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
>> +
>> + if (mmc->clock > 0)
>> + dw_mci_change_clock(host, mmc->clock);
>> +
>> + if (mmc->bus_width == 8)
>> + dw_mci_writel(host, PORT0_CARD_WIDTH8, DWMCI_CTYPE);
>> + else if (mmc->bus_width == 4)
>> + dw_mci_writel(host, PORT0_CARD_WIDTH4, DWMCI_CTYPE);
>> + else
>> + dw_mci_writel(host, PORT0_CARD_WIDTH1, DWMCI_CTYPE);
>> +
>> + val = dw_mci_readl(host, DWMCI_CLKSEL);
>> + if (host->peripheral == PERIPH_ID_SDMMC0)
>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_3PHASE_SHIFT |
>> + SELCLK_DIV_RATIO);
>> + if (host->peripheral == PERIPH_ID_SDMMC2)
>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_2PHASE_SHIFT |
>> + SELCLK_DIV_RATIO);
>> + if (host->peripheral == PERIPH_ID_SDMMC4)
>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_2PHASE_SHIFT);
>> +
>> + dw_mci_writel(host, val, DWMCI_CLKSEL);
>> +}
>> +
>> +/*
>> + * Fifo init for host controller
>> + */
>> +static void dw_mci_fifo_init(struct dw_mci_host *host)
>> +{
>> + int fifo_val, fifo_depth, fifo_threshold;
>> +
>> + fifo_val = dw_mci_readl(host, DWMCI_FIFOTH);
>> +
>> + /* Power-on value of RX_WMark is FIFO_DEPTH-1 */
>> + fifo_depth = 1 + ((fifo_val >> 16) & 0x7ff);
>> + fifo_threshold = fifo_depth / 2;
>> +
>> + fifo_val &= ~(RX_WMARK | TX_WMARK | MSIZE_MASK);
>> + fifo_val |= (fifo_threshold | (fifo_threshold << 16) | MSIZE_8);
>> + dw_mci_writel(host, fifo_val, DWMCI_FIFOTH);
>> +}
>> +
>> +
>> +static int dw_mci_reset(struct dw_mci_host *host)
>> +{
>> + int err;
>> +
>> + /* power on the card */
>> + dw_mci_writel(host, POWER_ENABLE, DWMCI_PWREN);
>> +
>> + err = dw_mci_reset_all(host);
>> + if (err)
>> + return err;
>> +
>> + dw_mci_fifo_init(host);
>> +
>> + /* clear all pending interrupts */
>> + dw_mci_writel(host, INTMSK_ALL, DWMCI_RINTSTS);
>> +
>> + /* interrupts are not used, disable all */
>> + dw_mci_writel(host, 0, DWMCI_INTMASK);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_mci_initialize(struct mmc *mmc)
>> +{
>> + struct dw_mci_host *host = (struct dw_mci_host *)mmc->priv;
>> + unsigned int ier;
>> + int err;
>> +
>> + err = dw_mci_reset(host);
>> + if (err)
>> + return err;
>> +
>> + /* enumerate at 400KHz */
>> + dw_mci_change_clock(host, MIN_DWMMC_CLOCK);
>> +
>> + /* set auto stop command */
>> + ier = dw_mci_readl(host, DWMCI_CONTROL);
>> + ier |= SEND_AS_CCSD;
>> + dw_mci_writel(host, ier, DWMCI_CONTROL);
>> +
>> + /* set 1bit card mode */
>> + dw_mci_writel(host, PORT0_CARD_WIDTH1, DWMCI_CTYPE);
>> +
>> + dw_mci_writel(host, 0xfffff, DWMCI_DEBENCE);
>> +
>> + /* set bus mode register for IDMAC */
>> + dw_mci_writel(host, BMOD_IDMAC_RESET, DWMCI_BMOD);
>> +
>> + dw_mci_writel(host, 0x0, DWMCI_IDINTEN);
>> +
>> + /* set the max timeout for data and response */
>> + dw_mci_writel(host, TMOUT_MAX, DWMCI_TMOUT);
>> +
>> + return 0;
>> +}
>> +
>> +int dw_mci_init(enum periph_id periph_id, int bus_width)
>> +{
>> + struct dw_mci_host *mmc_host;
>> + struct mmc *mmc;
>> +
>> + if (num_devs == MAX_MMC_HOSTS) {
>> + debug("%s: Too many hosts\n", __func__);
>> + return -1;
>> + }
>> +
>> + /* set the clock for dwmmc controller */
>> + if (set_dw_mci_clk_div(periph_id)) {
>> + debug("clock_set_dw_mci failed\n");
>> + return -EINVAL;
>> + }
>> +
>> + mmc = &dw_mci_dev[num_devs];
>> + mmc_host = &dw_mci_host[num_devs];
>> +
>> + sprintf(mmc->name, "DWMMC%d", num_devs);
>> + num_devs++;
>> +
>> + mmc->priv = mmc_host;
>> + mmc->send_cmd = dw_mci_send_command;
>> + mmc->set_ios = dw_mci_set_ios;
>> + mmc->init = dw_mci_initialize;
>> +
>> + /*
>> + * In 2.40a spec, Data offset is changed.
>> + * Need to check the version-id and set data-offset for DATA register.
>> + */
>> + mmc_host->verid = GET_VERID(dw_mci_readl(mmc_host, DWMCI_VERID));
>> + debug("Version ID is %04x\n", mmc_host->verid);
>> +
>> + if (mmc_host->verid < DW_MMC_240A)
>> + mmc_host->data_offset = DATA_OFFSET;
>> + else
>> + mmc_host->data_offset = DATA_240A_OFFSET;
>> +
>> + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
>> + mmc->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
>> +
>> + if (bus_width == 8)
>> + mmc->host_caps |= MMC_MODE_8BIT;
>> + else
>> + mmc->host_caps |= MMC_MODE_4BIT;
>> +
>> + mmc->f_min = MIN_DWMMC_CLOCK;
>> + mmc->f_max = MAX_DWMMC_CLOCK;
>> +
>> + exynos_pinmux_config(periph_id,
>> + bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : 0);
>> +
>> + mmc_host->clock = 0;
>> + mmc_host->peripheral = periph_id;
>> + mmc_host->ioaddr = (void *)samsung_get_base_dwmmc();
>> + mmc->b_max = 1;
>> + mmc_register(mmc);
>> + mmc->block_dev.removable = 1;
>> + debug("dwmmc: periph_id=%d, width=%d, ioaddr=%p\n",
>> + periph_id, bus_width, mmc_host->ioaddr);
>> +
>> + return 0;
>> +}
>> --
>> 1.7.4.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
with warm regards,
Chander Kashyap
More information about the U-Boot
mailing list