[U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver
Jaehoon Chung
jh80.chung at samsung.com
Tue Jun 12 10:37:32 CEST 2012
Hi Rajeshwari,
Before applied this patch, it must apply your patch for PINMUX. right?
Best Regards,
Jaehoon Chung
On 06/12/2012 03:14 PM, Chander Kashyap wrote:
> Hi,
>
> On 11 June 2012 19:26, Rajeshwari Birje <rajeshwari.birje at gmail.com> wrote:
>> Hi All,
>>
>> ccing Jaehoon Chung
>>
>> Regards,
>> Rajeshwari Shinde.
>>
>>
>> On Mon, Jun 11, 2012 at 6:18 PM, Rajeshwari Shinde
>> <rajeshwari.s at samsung.com> wrote:
>>> Add DWMMC driver support and resgister description for same.
>>>
>>> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
>>> Signed-off-by: Terry Lambert <tlambert at chromium.org>
>>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
>>> ---
>>> Changes in V2:
>>> - Incorporated comments from Jaehung Chung.
>>> - Renamed MSHCI to DWMMC through out the driver.
>>> - Renamed files to exynos_dwmmc from exynos_mshc.
>>> - Removed major hard codings of values.
>>> - Wrote dw_mci_writel and dw_mci_readl functions for writel and readl.
>>> - Removed structure of registers and defined each one separately.
>>> orch/arm/include/asm/arch-exynos/exynos_dwmmc.h | 229 +++++++++
>>> drivers/mmc/Makefile | 1 +
>>> drivers/mmc/exynos_dwmmc.c | 566 +++++++++++++++++++++++
>>> 3 files changed, 796 insertions(+), 0 deletions(-)
>>> create mode 100644 arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>>> create mode 100644 drivers/mmc/exynos_dwmmc.c
>>>
>>> diff --git a/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h b/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>>> new file mode 100644
>>> index 0000000..349bd75
>>> --- /dev/null
>>> +++ b/arch/arm/include/asm/arch-exynos/exynos_dwmmc.h
>>> @@ -0,0 +1,229 @@
>>> +/*
>>> + * (C) Copyright 2012 SAMSUNG Electronics
>>> + * Abhilash Kesavan <a.kesavan at samsung.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>>> + *
>>> + */
>>> +#ifndef __ASM_ARCH_COMMON_DWMMC_H
>>> +#define __ASM_ARCH_COMMON_DWMMC_H
>>> +
>>> +#include <asm/arch/pinmux.h>
>>> +
>>> +#ifndef __ASSEMBLY__
>>> +struct dw_mci_host {
>>> + void *ioaddr;
>>> + unsigned int clock; /* Current clock in MHz */
>>> + enum periph_id peripheral;
>>> + unsigned int verid; /* SDHCI spec. version */
>>> + unsigned int data_offset; /* DATA offset */
>>> +};
>>> +
>>> +/*
>>> + * Struct idma
>>> + * Holds the descriptor list
>>> + */
>>> +struct dw_mci_idmac {
>>> + u32 des0;
>>> + u32 des1;
>>> + u32 des2;
>>> + u32 des3;
>>> +};
>>> +
> #endif
>>> +/* Control Register Register */
>>> +#define DWMCI_CONTROL 0x00
>>> +#define CTRL_RESET (0x1 << 0)
>>> +#define FIFO_RESET (0x1 << 1)
>>> +#define DMA_RESET (0x1 << 2)
>>> +#define DMA_ENABLE (0x1 << 5)
>>> +#define SEND_AS_CCSD (0x1 << 10)
>>> +#define ENABLE_IDMAC (0x1 << 25)
>>> +
>>> +/* Power Enable Register */
>>> +#define DWMCI_PWREN 0x04
>>> +#define POWER_ENABLE (0x1 << 0)
>>> +
>>> +#define DWMCI_CLKDIV 0x08
>>> +#define DWMCI_CLKSRC 0x0c
>>> +
>>> +/* Clock Enable Register */
>>> +#define DWMCI_CLKENA 0x10
>>> +#define CLK_ENABLE (0x1 << 0)
>>> +#define CLK_DISABLE (0x0 << 0)
>>> +
>>> +/* Timeout Register */
>>> +#define DWMCI_TMOUT 0x14
>>> +#define TMOUT_MAX 0xffffffff
>>> +
>>> +/* Card Type Register */
>>> +#define DWMCI_CTYPE 0x18
>>> +#define PORT0_CARD_WIDTH1 0
>>> +#define PORT0_CARD_WIDTH4 (0x1 << 0)
>>> +#define PORT0_CARD_WIDTH8 (0x1 << 16)
>>> +
>>> +#define DWMCI_BLKSIZE 0x1c
>>> +#define DWMCI_BYTCNT 0x20
>>> +
>>> +/* Interrupt Mask Register */
>>> +#define DWMCI_INTMASK 0x24
>>> +#define INTMSK_ALL 0xffffffff
>>> +#define INTMSK_RE (0x1 << 1)
>>> +#define INTMSK_CDONE (0x1 << 2)
>>> +#define INTMSK_DTO (0x1 << 3)
>>> +#define INTMSK_DCRC (0x1 << 7)
>>> +#define INTMSK_RTO (0x1 << 8)
>>> +#define INTMSK_DRTO (0x1 << 9)
>>> +#define INTMSK_HTO (0x1 << 10)
>>> +#define INTMSK_FRUN (0x1 << 11)
>>> +#define INTMSK_HLE (0x1 << 12)
>>> +#define INTMSK_SBE (0x1 << 13)
>>> +#define INTMSK_ACD (0x1 << 14)
>>> +#define INTMSK_EBE (0x1 << 15)
>>> +
>>> +#define DWMCI_CMDARG 0x28
>>> +
>>> +/* Command Register */
>>> +#define DWMCI_CMD 0x2c
>>> +#define CMD_RESP_EXP_BIT (0x1 << 6)
>>> +#define CMD_RESP_LENGTH_BIT (0x1 << 7)
>>> +#define CMD_CHECK_CRC_BIT (0x1 << 8)
>>> +#define CMD_DATA_EXP_BIT (0x1 << 9)
>>> +#define CMD_RW_BIT (0x1 << 10)
>>> +#define CMD_SENT_AUTO_STOP_BIT (0x1 << 12)
>>> +#define CMD_WAIT_PRV_DAT_BIT (0x1 << 13)
>>> +#define CMD_SEND_CLK_ONLY (0x1 << 21)
>>> +#define CMD_USE_HOLD_REG (0x1 << 29)
>>> +#define CMD_STRT_BIT (0x1 << 31)
>>> +#define CMD_ONLY_CLK (CMD_STRT_BIT | CMD_SEND_CLK_ONLY | \
>>> + CMD_WAIT_PRV_DAT_BIT)
>>> +
>>> +#define DWMCI_RESP0 0x30
>>> +#define DWMCI_RESP1 0x34
>>> +#define DWMCI_RESP2 0x38
>>> +#define DWMCI_RESP3 0x3c
>>> +
>>> +#define DWMCI_MINTSTS 0x40
>>> +
>>> +/* Raw Interrupt Register */
>>> +#define DWMCI_RINTSTS 0x44
>>> +#define DATA_ERR (INTMSK_EBE | INTMSK_SBE | INTMSK_HLE | \
>>> + INTMSK_FRUN | INTMSK_EBE | INTMSK_DCRC)
>>> +#define DATA_TOUT (INTMSK_HTO | INTMSK_DRTO)
>>> +
>>> +/* Status Register */
>>> +#define DWMCI_STATUS 0x48
>>> +#define DATA_BUSY (0x1 << 9)
>>> +
>>> +/* FIFO Threshold Watermark Register */
>>> +#define DWMCI_FIFOTH 0x4c
>>> +#define TX_WMARK (0xFFF << 0)
>>> +#define RX_WMARK (0xFFF << 16)
>>> +#define MSIZE_MASK (0x7 << 28)
>>> +
>>> +#define DWMCI_CDETECT 0x50
>>> +#define DWMCI_WRTORT 0x54
>>> +#define DWMCI_GPIO 0x58
>>> +#define DWMCI_TCBCNT 0x5c
>>> +#define DWMCI_TBBCNT 0x60
>>> +#define DWMCI_DEBENCE 0x64
>>> +#define DWMCI_USRID 0x68
>>> +#define DWMCI_VERID 0x6c
>>> +#define DWMCI_HCON 0x70
>>> +#define DWMCI_UHS_REG 0x74
>>> +#define DWMCI_RST_n 0x78
>>> +
>>> +/* DW DMA Mutiple Transaction Size */
>>> +#define MSIZE_8 (2 << 28)
>>> +
>>> +/* Bus Mode Register */
>>> +#define DWMCI_BMOD 0x80
>>> +#define BMOD_IDMAC_RESET (0x1 << 0)
>>> +#define BMOD_IDMAC_FB (0x1 << 1)
>>> +#define BMOD_IDMAC_ENABLE (0x1 << 7)
>>> +
>>> +#define DWMCI_PLDMND 0x84
>>> +#define DWMCI_DBADDR 0x88
>>> +
>>> +/* IDMAC bits */
>>> +#define DWMCI_IDSTS 0x8c
>>> +#define DWMCI_IDMAC_OWN (0x1 << 31)
>>> +#define DWMCI_IDMAC_CH (0x1 << 4)
>>> +#define DWMCI_IDMAC_FS (0x1 << 3)
>>> +#define DWMCI_IDMAC_LD (0x1 << 2)
>>> +
>>> +#define DWMCI_IDINTEN 0x90
>>> +#define DWMCI_DSCADDR 0x94
>>> +#define DWMCI_BUFADDR 0x98
>>> +
>>> +/* CLKSEL bits*/
>>> +#define DWMCI_CLKSEL 0x9c
>>> +#define SELCLK_SAMPLE_1PHASE_Shift (0x1 << 0)
>>> +#define SELCLK_DRV_3PHASE_SHIFT (0x3 << 16)
>>> +#define SELCLK_DRV_2PHASE_SHIFT (0x2 << 16)
>>> +#define SELCLK_DIV_RATIO (0x3 << 24)
>>> +
>>> +#define DWMCI_CARDTHRCTL 0x100
>>> +
>>> +/*
>>> + * Data offset is difference according to Version
>>> + * Lower than 2.40a : data register offest is 0x100
>>> + */
>>> +#define DW_MMC_240A 0x240a
>>> +#define DATA_OFFSET 0x100
>>> +#define DATA_240A_OFFSET 0x200
>>> +
>>> +#define MAX_DWMMC_CLOCK 52000000 /* Max limit is 52MHz */
>>> +#define MIN_DWMMC_CLOCK 400000 /* Lower limit is 400KHz */
>>> +#define COMMAND_TIMEOUT 10000
>>> +#define TIMEOUT_MS 100
>>> +#define MAXCLKDIV 0xff
>>> +
>>> +/* Version ID register define */
>>> +#define GET_VERID(x) ((x) & 0xFFFF)
>>> +
>>> +static inline void dw_mci_writel(struct dw_mci_host *host, u32 val, int reg)
>>> +{
>>> + writel(val, host->ioaddr + reg);
>>> +}
>>> +
>>> +static inline void dw_mci_writew(struct dw_mci_host *host, u16 val, int reg)
>>> +{
>>> + writew(val, host->ioaddr + reg);
>>> +}
>>> +
>>> +static inline void dw_mci_writeb(struct dw_mci_host *host, u8 val, int reg)
>>> +{
>>> + writeb(val, host->ioaddr + reg);
>>> +}
>>> +
>>> +static inline u32 dw_mci_readl(struct dw_mci_host *host, int reg)
>>> +{
>>> + return readl(host->ioaddr + reg);
>>> +}
>>> +
>>> +static inline u16 dw_mci_readw(struct dw_mci_host *host, int reg)
>>> +{
>>> + return readw(host->ioaddr + reg);
>>> +}
>>> +
>>> +static inline u8 dw_mci_readb(struct dw_mci_host *host, int reg)
>>> +{
>>> + return readb(host->ioaddr + reg);
>>> +}
>>> +
>>> +int dw_mci_init(enum periph_id periph_id, int bus_width);
>>> +
>>> +#endif /* __ASSEMBLY__ */
> remove at this place after structure declaration.
>>> +#endif /* __ASM_ARCH_COMMON_DWMMC_H */
>>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
>>> index c245352..cf0be05 100644
>>> --- a/drivers/mmc/Makefile
>>> +++ b/drivers/mmc/Makefile
>>> @@ -27,6 +27,7 @@ LIB := $(obj)libmmc.o
>>>
>>> COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
>>> COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
>>> +COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dwmmc.o
>>> COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
>>> COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
>>> COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
>>> diff --git a/drivers/mmc/exynos_dwmmc.c b/drivers/mmc/exynos_dwmmc.c
>>> new file mode 100644
>>> index 0000000..96f6ceb
>>> --- /dev/null
>>> +++ b/drivers/mmc/exynos_dwmmc.c
>>> @@ -0,0 +1,566 @@
>>> +/*
>>> + * (C) Copyright 2012 Samsung Electronics Co. Ltd
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <mmc.h>
>>> +#include <asm/errno.h>
>>> +#include <asm/arch/clk.h>
>>> +#include <asm/arch/cpu.h>
>>> +#include <asm/arch/exynos_dwmmc.h>
>>> +#include <asm/arch/pinmux.h>
>>> +
>>> +/* support 4 mmc hosts */
>>> +enum {
>>> + MAX_MMC_HOSTS = 4
>>> +};
>>> +
>>> +static struct mmc dw_mci_dev[MAX_MMC_HOSTS];
>>> +static struct dw_mci_host dw_mci_host[MAX_MMC_HOSTS];
>>> +static int num_devs;
>>> +
>>> +/**
>>> + * Set bits of DWMMC host control register.
>>> + *
>>> + * @param host DWMMC host
>>> + * @param bits bits to be set
>>> + * @return 0 on success, TIMEOUT on failure
>>> + */
>>> +static int dw_mci_setbits(struct dw_mci_host *host, unsigned int bits)
>>> +{
>>> + ulong start;
>>> +
>>> + setbits_le32(host->ioaddr + DWMCI_CONTROL, bits);
>>> +
>>> + start = get_timer(0);
>>> + while (dw_mci_readl(host, DWMCI_CONTROL) & bits) {
>>> + if (get_timer(start) > TIMEOUT_MS) {
>>> + debug("Set bits failed\n");
>>> + return TIMEOUT;
>>> + }
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * Reset DWMMC host control register.
>>> + *
>>> + * @param host DWMMC host
>>> + * @return 0 on success, TIMEOUT on failure
>>> + */
>>> +static int dw_mci_reset_all(struct dw_mci_host *host)
>>> +{
>>> + ulong start;
>>> +
>>> + /*
>>> + * Before we reset ciu check the DATA0 line. If it is low and
>>> + * we resets the ciu then we might see some errors.
>>> + */
>>> + start = get_timer(0);
>>> + while (dw_mci_readl(host, DWMCI_STATUS) & DATA_BUSY) {
>>> + if (get_timer(start) > TIMEOUT_MS) {
>>> + debug("Controller did not release"
>>> + "data0 before ciu reset\n");
>>> + return TIMEOUT;
>>> + }
>>> + }
>>> + return dw_mci_setbits(host, CTRL_RESET | FIFO_RESET | DMA_RESET);
>>> +}
>>> +
>>> +static void dw_mci_set_mdma_desc(u8 *desc_vir, u8 *desc_phy,
>>> + unsigned int des0, unsigned int des1, unsigned int des2)
>>> +{
>>> + struct dw_mci_idmac *desc = (struct dw_mci_idmac *)desc_vir;
>>> +
>>> + desc->des0 = des0;
>>> + desc->des1 = des1;
>>> + desc->des2 = des2;
>>> + desc->des3 = (unsigned int)desc_phy + sizeof(struct dw_mci_idmac);
>>> +}
>>> +
>>> +static int dw_mci_prepare_data(struct dw_mci_host *host, struct mmc_data *data)
>>> +{
>>> + unsigned int i, data_cnt, des_flag, blksz;
>>> + int err;
>>> + ulong data_start, data_end;
>>> + static struct dw_mci_idmac idmac_desc[0x10000];
>>> + struct dw_mci_idmac *pdesc_dmac;
>>> +
>>> + err = dw_mci_setbits(host, FIFO_RESET);
>>> + if (err) {
>>> + debug("Fail to reset FIFO\n");
>>> + return err;
>>> + }
>>> +
>>> + pdesc_dmac = idmac_desc;
>>> + blksz = data->blocksize;
>>> + data_cnt = data->blocks;
>>> +
>>> + for (i = 0;; i++) {
>>> + des_flag = (DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH);
>>> + des_flag |= (i == 0) ? DWMCI_IDMAC_FS : 0;
>>> + if (data_cnt <= 8) {
>>> + des_flag |= DWMCI_IDMAC_LD;
>>> + dw_mci_set_mdma_desc((u8 *)pdesc_dmac,
>>> + (u8 *)virt_to_phys(pdesc_dmac),
>>> + des_flag, blksz * data_cnt,
>>> + (unsigned int)(virt_to_phys(data->dest)) +
>>> + (unsigned int)(i * 0x1000));
>>> + break;
>>> + }
>>> + /* max transfer size is 4KB per descriptor */
>>> + dw_mci_set_mdma_desc((u8 *)pdesc_dmac,
>>> + (u8 *)virt_to_phys(pdesc_dmac),
>>> + des_flag, blksz * 8,
>>> + virt_to_phys(data->dest) +
>>> + (unsigned int)(i * 0x1000));
>>> +
>>> + data_cnt -= 8;
>>> + pdesc_dmac++;
>>> + }
>>> +
>>> + data_start = (ulong)idmac_desc;
>>> + data_end = (ulong)pdesc_dmac;
>>> + flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
>>> +
>>> + data_start = (ulong)data->dest;
>>> + data_end = (ulong)(data->dest + data->blocks * data->blocksize);
>>> + flush_dcache_range(data_start, data_end);
>>> +
>>> + dw_mci_writel(host, (unsigned int)virt_to_phys(idmac_desc),
>>> + DWMCI_DBADDR);
>>> +
>>> + /* enable the Internal DMA Controller */
>>> + setbits_le32(host->ioaddr + DWMCI_CONTROL, ENABLE_IDMAC |
>>> + DMA_ENABLE);
>>> + setbits_le32(host->ioaddr + DWMCI_BMOD, BMOD_IDMAC_ENABLE |
>>> + BMOD_IDMAC_FB);
>>> +
>>> + dw_mci_writel(host, data->blocksize, DWMCI_BLKSIZE);
>>> + dw_mci_writel(host, data->blocksize * data->blocks, DWMCI_BYTCNT);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_mci_set_transfer_mode(struct dw_mci_host *host,
>>> + struct mmc_data *data)
>>> +{
>>> + int mode = CMD_DATA_EXP_BIT;
>>> +
>>> + if (data->blocks > 1)
>>> + mode |= CMD_SENT_AUTO_STOP_BIT;
>>> + if (data->flags & MMC_DATA_WRITE)
>>> + mode |= CMD_RW_BIT;
>>> +
>>> + return mode;
>>> +}
>>> +
>>> +/*
>>> + * Sends a command out on the bus.
>>> + *
>>> + * @param mmc mmc device
>>> + * @param cmd mmc_cmd to be sent on bus
>>> + * @param data mmc data to be sent (optional)
>>> + *
>>> + * @return return 0 if ok, else error number
>>> + */
>>> +static int dw_mci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
>>> + struct mmc_data *data)
>>> +{
>>> + struct dw_mci_host *host = mmc->priv;
>>> +
>>> + int flags = 0, i, err;
>>> + unsigned int mask;
>>> + ulong start, data_start, data_end;
>>> +
>>> + /*
>>> + * We shouldn't wait for data inihibit for stop commands, even
>>> + * though they might use busy signaling
>>> + */
>>> + start = get_timer(0);
>>> + while (dw_mci_readl(host, DWMCI_STATUS) & DATA_BUSY) {
>>> + if (get_timer(start) > COMMAND_TIMEOUT) {
>>> + debug("timeout on data busy\n");
>>> + return TIMEOUT;
>>> + }
>>> + }
>>> +
>>> + if (dw_mci_readl(host, DWMCI_RINTSTS)) {
>>> + if ((dw_mci_readl(host, DWMCI_RINTSTS) &
>>> + (INTMSK_CDONE | INTMSK_ACD)) == 0)
>>> + debug("there are pending interrupts 0x%x\n",
>>> + dw_mci_readl(host, DWMCI_RINTSTS));
>>> + }
>>> + /* It clears all pending interrupts before sending a command*/
>>> + dw_mci_writel(host, INTMSK_ALL, DWMCI_RINTSTS);
>>> +
>>> + if (data) {
>>> + err = dw_mci_prepare_data(host, data);
>>> + if (err) {
>>> + debug("fail to prepare data\n");
>>> + return err;
>>> + }
>>> + }
>>> +
>>> + dw_mci_writel(host, cmd->cmdarg, DWMCI_CMDARG);
>>> +
>>> + if (data)
>>> + flags = dw_mci_set_transfer_mode(host, data);
>>> +
>>> + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
>>> + /* this is out of SD spec */
>>> + return -1;
>>> +
>>> + if (cmd->resp_type & MMC_RSP_PRESENT) {
>>> + flags |= CMD_RESP_EXP_BIT;
>>> + if (cmd->resp_type & MMC_RSP_136)
>>> + flags |= CMD_RESP_LENGTH_BIT;
>>> + }
>>> +
>>> + if (cmd->resp_type & MMC_RSP_CRC)
>>> + flags |= CMD_CHECK_CRC_BIT;
>>> + flags |= (cmd->cmdidx | CMD_STRT_BIT | CMD_USE_HOLD_REG |
>>> + CMD_WAIT_PRV_DAT_BIT);
>>> +
>>> + mask = dw_mci_readl(host, DWMCI_CMD);
>>> + if (mask & CMD_STRT_BIT)
>>> + debug("cmd busy, current cmd: %d", cmd->cmdidx);
>>> +
>>> + dw_mci_writel(host, flags, DWMCI_CMD);
>>> + /* wait for command complete by busy waiting. */
>>> + for (i = 0; i < COMMAND_TIMEOUT; i++) {
>>> + mask = dw_mci_readl(host, DWMCI_RINTSTS);
>>> + if (mask & INTMSK_CDONE) {
>>> + if (!data)
>>> + dw_mci_writel(host, mask, DWMCI_RINTSTS);
>>> + break;
>>> + }
>>> + }
>>> + /* timeout for command complete. */
>>> + if (COMMAND_TIMEOUT == i) {
>>> + debug("timeout waiting for status update\n");
>>> + return TIMEOUT;
>>> + }
>>> +
>>> + if (mask & INTMSK_RTO) {
>>> + if (((cmd->cmdidx == MMC_CMD_SEND_EXT_CSD ||
>>> + cmd->cmdidx == MMC_CMD_APP_CMD)) == 0) {
>>> + debug("response timeout error: 0x%x cmd: %d\n",
>>> + mask, cmd->cmdidx);
>>> + }
>>> + return TIMEOUT;
>>> + } else if (mask & INTMSK_RE) {
>>> + debug("response error: 0x%x cmd: %d\n", mask, cmd->cmdidx);
>>> + return -1;
>>> + }
>>> + if (cmd->resp_type & MMC_RSP_PRESENT) {
>>> + if (cmd->resp_type & MMC_RSP_136) {
>>> + /* CRC is stripped so we need to do some shifting. */
>>> + cmd->response[0] = dw_mci_readl(host,
>>> + DWMCI_RESP3);
>>> + cmd->response[1] = dw_mci_readl(host,
>>> + DWMCI_RESP2);
>>> + cmd->response[2] = dw_mci_readl(host,
>>> + DWMCI_RESP1);
>>> + cmd->response[3] = dw_mci_readl(host,
>>> + DWMCI_RESP0);
>>> + } else {
>>> + cmd->response[0] = dw_mci_readl(host, DWMCI_RESP0);
>>> + debug("\tcmd->response[0]: 0x%08x\n", cmd->response[0]);
>>> + }
>>> + }
>>> +
>>> + if (data) {
>>> + while (!(mask & (DATA_ERR | DATA_TOUT | INTMSK_DTO)))
>>> + mask = dw_mci_readl(host, DWMCI_RINTSTS);
>>> + dw_mci_writel(host, mask, DWMCI_RINTSTS);
>>> + if (data->flags & MMC_DATA_READ) {
>>> + data_start = (ulong)data->dest;
>>> + data_end = (ulong)data->dest +
>>> + data->blocks * data->blocksize;
>>> + invalidate_dcache_range(data_start, data_end);
>>> + }
>>> + if (mask & (DATA_ERR | DATA_TOUT)) {
>>> + debug("error during transfer: 0x%x\n", mask);
>>> + /* make sure disable IDMAC and IDMAC_Interrupts */
>>> + dw_mci_writel(host, (dw_mci_readl(host, DWMCI_CONTROL) &
>>> + ~(DMA_ENABLE | ENABLE_IDMAC)), DWMCI_CONTROL);
>>> + /* mask all interrupt source of IDMAC */
>>> + dw_mci_writel(host, 0, DWMCI_IDINTEN);
>>> + return -1;
>>> + } else if (mask & INTMSK_DTO) {
>>> + debug("dwmmc dma interrupt end\n");
>>> + } else {
>>> + debug("unexpected condition 0x%x\n", mask);
>>> + }
>>> + /* make sure disable IDMAC and IDMAC_Interrupts */
>>> + dw_mci_writel(host, (dw_mci_readl(host, DWMCI_CONTROL) &
>>> + ~(DMA_ENABLE | ENABLE_IDMAC)),
>>> + DWMCI_CONTROL);
>>> + /* mask all interrupt source of IDMAC */
>>> + dw_mci_writel(host, 0, DWMCI_IDINTEN);
>>> + }
>>> +
>>> + udelay(100);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/*
>>> + * ON/OFF host controller clock
>>> + *
>>> + * @param host pointer to dw_mci_host
>>> + * @param val to enable/disable clock
>>> + */
>>> +static void dw_mci_clock_onoff(struct dw_mci_host *host, int val)
>>> +{
>>> +
>>> + if (val)
>>> + dw_mci_writel(host, CLK_ENABLE, DWMCI_CLKENA);
>>> + else
>>> + dw_mci_writel(host, CLK_DISABLE, DWMCI_CLKENA);
>>> +
>>> + dw_mci_writel(host, 0, DWMCI_CMD);
>>> + dw_mci_writel(host, CMD_ONLY_CLK, DWMCI_CMD);
>>> +}
>>> +
>>> +/*
>>> + * change host controller clock
>>> + *
>>> + * @param host pointer to dw_mci_host
>>> + * @param clock request clock
>>> + */
>>> +static void dw_mci_change_clock(struct dw_mci_host *host, uint clock)
>>> +{
>>> + int div;
>>> + u32 sclk_mshc;
>>> +
>>> + if (clock == host->clock)
>>> + return;
>>> +
>>> + /* If Input clock is higher than maximum mshc clock */
>>> + if (clock > MAX_DWMMC_CLOCK) {
>>> + debug("Input clock is too high\n");
>>> + clock = MAX_DWMMC_CLOCK;
>>> + }
>>> +
>>> + /* disable the clock before changing it */
>>> + dw_mci_clock_onoff(host, CLK_DISABLE);
>>> +
>>> + /* get the clock division */
>>> + if (host->peripheral == PERIPH_ID_SDMMC4)
>>> + sclk_mshc = get_dw_mci_clk_div(host->peripheral) / 2;
>>> + else
>>> + sclk_mshc = get_dw_mci_clk_div(host->peripheral) / 4;
>>> +
>>> + /* CLKDIV */
>>> + for (div = 1 ; div <= MAXCLKDIV; div++) {
>>> + if ((sclk_mshc / (2 * div)) <= clock) {
>>> + dw_mci_writel(host, div, DWMCI_CLKDIV);
>>> + break;
>>> + }
>>> + }
>>> +
>>> + dw_mci_writel(host, 0, DWMCI_CMD);
>>> + dw_mci_writel(host, CMD_ONLY_CLK, DWMCI_CMD);
>>> +
>>> + dw_mci_writel(host, dw_mci_readl(host, DWMCI_CMD) &
>>> + (~CMD_SEND_CLK_ONLY),
>>> + DWMCI_CMD);
>>> +
>>> + dw_mci_clock_onoff(host, CLK_ENABLE);
>>> + host->clock = clock;
>>> +}
>>> +
>>> +/*
>>> + * Set ios for host controller clock
>>> + *
>>> + * This sets the card bus width and clksel
>>> + */
>>> +static void dw_mci_set_ios(struct mmc *mmc)
>>> +{
>>> + struct dw_mci_host *host = mmc->priv;
>>> + int val;
>>> +
>>> + debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
>>> +
>>> + if (mmc->clock > 0)
>>> + dw_mci_change_clock(host, mmc->clock);
>>> +
>>> + if (mmc->bus_width == 8)
>>> + dw_mci_writel(host, PORT0_CARD_WIDTH8, DWMCI_CTYPE);
>>> + else if (mmc->bus_width == 4)
>>> + dw_mci_writel(host, PORT0_CARD_WIDTH4, DWMCI_CTYPE);
>>> + else
>>> + dw_mci_writel(host, PORT0_CARD_WIDTH1, DWMCI_CTYPE);
>>> +
>>> + val = dw_mci_readl(host, DWMCI_CLKSEL);
>>> + if (host->peripheral == PERIPH_ID_SDMMC0)
>>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_3PHASE_SHIFT |
>>> + SELCLK_DIV_RATIO);
>>> + if (host->peripheral == PERIPH_ID_SDMMC2)
>>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_2PHASE_SHIFT |
>>> + SELCLK_DIV_RATIO);
>>> + if (host->peripheral == PERIPH_ID_SDMMC4)
>>> + val |= (SELCLK_SAMPLE_1PHASE_Shift | SELCLK_DRV_2PHASE_SHIFT);
>>> +
>>> + dw_mci_writel(host, val, DWMCI_CLKSEL);
>>> +}
>>> +
>>> +/*
>>> + * Fifo init for host controller
>>> + */
>>> +static void dw_mci_fifo_init(struct dw_mci_host *host)
>>> +{
>>> + int fifo_val, fifo_depth, fifo_threshold;
>>> +
>>> + fifo_val = dw_mci_readl(host, DWMCI_FIFOTH);
>>> +
>>> + /* Power-on value of RX_WMark is FIFO_DEPTH-1 */
>>> + fifo_depth = 1 + ((fifo_val >> 16) & 0x7ff);
>>> + fifo_threshold = fifo_depth / 2;
>>> +
>>> + fifo_val &= ~(RX_WMARK | TX_WMARK | MSIZE_MASK);
>>> + fifo_val |= (fifo_threshold | (fifo_threshold << 16) | MSIZE_8);
>>> + dw_mci_writel(host, fifo_val, DWMCI_FIFOTH);
>>> +}
>>> +
>>> +
>>> +static int dw_mci_reset(struct dw_mci_host *host)
>>> +{
>>> + int err;
>>> +
>>> + /* power on the card */
>>> + dw_mci_writel(host, POWER_ENABLE, DWMCI_PWREN);
>>> +
>>> + err = dw_mci_reset_all(host);
>>> + if (err)
>>> + return err;
>>> +
>>> + dw_mci_fifo_init(host);
>>> +
>>> + /* clear all pending interrupts */
>>> + dw_mci_writel(host, INTMSK_ALL, DWMCI_RINTSTS);
>>> +
>>> + /* interrupts are not used, disable all */
>>> + dw_mci_writel(host, 0, DWMCI_INTMASK);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_mci_initialize(struct mmc *mmc)
>>> +{
>>> + struct dw_mci_host *host = (struct dw_mci_host *)mmc->priv;
>>> + unsigned int ier;
>>> + int err;
>>> +
>>> + err = dw_mci_reset(host);
>>> + if (err)
>>> + return err;
>>> +
>>> + /* enumerate at 400KHz */
>>> + dw_mci_change_clock(host, MIN_DWMMC_CLOCK);
>>> +
>>> + /* set auto stop command */
>>> + ier = dw_mci_readl(host, DWMCI_CONTROL);
>>> + ier |= SEND_AS_CCSD;
>>> + dw_mci_writel(host, ier, DWMCI_CONTROL);
>>> +
>>> + /* set 1bit card mode */
>>> + dw_mci_writel(host, PORT0_CARD_WIDTH1, DWMCI_CTYPE);
>>> +
>>> + dw_mci_writel(host, 0xfffff, DWMCI_DEBENCE);
>>> +
>>> + /* set bus mode register for IDMAC */
>>> + dw_mci_writel(host, BMOD_IDMAC_RESET, DWMCI_BMOD);
>>> +
>>> + dw_mci_writel(host, 0x0, DWMCI_IDINTEN);
>>> +
>>> + /* set the max timeout for data and response */
>>> + dw_mci_writel(host, TMOUT_MAX, DWMCI_TMOUT);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +int dw_mci_init(enum periph_id periph_id, int bus_width)
>>> +{
>>> + struct dw_mci_host *mmc_host;
>>> + struct mmc *mmc;
>>> +
>>> + if (num_devs == MAX_MMC_HOSTS) {
>>> + debug("%s: Too many hosts\n", __func__);
>>> + return -1;
>>> + }
>>> +
>>> + /* set the clock for dwmmc controller */
>>> + if (set_dw_mci_clk_div(periph_id)) {
>>> + debug("clock_set_dw_mci failed\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + mmc = &dw_mci_dev[num_devs];
>>> + mmc_host = &dw_mci_host[num_devs];
>>> +
>>> + sprintf(mmc->name, "DWMMC%d", num_devs);
>>> + num_devs++;
>>> +
>>> + mmc->priv = mmc_host;
>>> + mmc->send_cmd = dw_mci_send_command;
>>> + mmc->set_ios = dw_mci_set_ios;
>>> + mmc->init = dw_mci_initialize;
>>> +
>>> + /*
>>> + * In 2.40a spec, Data offset is changed.
>>> + * Need to check the version-id and set data-offset for DATA register.
>>> + */
>>> + mmc_host->verid = GET_VERID(dw_mci_readl(mmc_host, DWMCI_VERID));
>>> + debug("Version ID is %04x\n", mmc_host->verid);
>>> +
>>> + if (mmc_host->verid < DW_MMC_240A)
>>> + mmc_host->data_offset = DATA_OFFSET;
>>> + else
>>> + mmc_host->data_offset = DATA_240A_OFFSET;
>>> +
>>> + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
>>> + mmc->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
>>> +
>>> + if (bus_width == 8)
>>> + mmc->host_caps |= MMC_MODE_8BIT;
>>> + else
>>> + mmc->host_caps |= MMC_MODE_4BIT;
>>> +
>>> + mmc->f_min = MIN_DWMMC_CLOCK;
>>> + mmc->f_max = MAX_DWMMC_CLOCK;
>>> +
>>> + exynos_pinmux_config(periph_id,
>>> + bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : 0);
>>> +
>>> + mmc_host->clock = 0;
>>> + mmc_host->peripheral = periph_id;
>>> + mmc_host->ioaddr = (void *)samsung_get_base_dwmmc();
>>> + mmc->b_max = 1;
>>> + mmc_register(mmc);
>>> + mmc->block_dev.removable = 1;
>>> + debug("dwmmc: periph_id=%d, width=%d, ioaddr=%p\n",
>>> + periph_id, bus_width, mmc_host->ioaddr);
>>> +
>>> + return 0;
>>> +}
>>> --
>>> 1.7.4.4
>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
More information about the U-Boot
mailing list