[U-Boot] [PATCH] mx53loco: use print_cpuinfo() defined in imx-common

[Ashok]

On 23-06-2012 21:05, Fabio Estevam wrote:
> Hi Ashok,
>
> On Fri, Jun 22, 2012 at 11:21 PM, Ashok <ashokkourla2000 at gmail.com> wrote:
>> use print_cpuinfo() defined in imx-common/cpu.c,
>> instead of duplicating function.
>
> The reason for duplicating this function is that we cannot print the
> CPU info right in the beginning, because if we do so the frequency of
> 800MHz would be reported, instead of the 1GHz that is only set later
> via I2C commands to the PMIC.
>
> So, please let the code as is to avoid wrong CPU frequency to be reported.
>
> Regards,
>
> Fabio Estevam
>
Hi Fabio,

Thanks for the information.

Regards,
Ashok