[U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed
Eric Nelson
eric.nelson at boundarydevices.com
Thu Jun 28 17:33:16 CEST 2012
On 06/28/2012 06:50 AM, Wolfgang Grandegger wrote:
> Hi,
>
> I just realized that I cannot download files on a Gitabit Ethernet
> network. I'm getting timeouts:
>
> MX6QSABRELITE U-Boot> boot
> Using FEC device
> TFTP from server 172.16.0.1; our IP address is 172.16.0.100
> Filename 'wolf/uImage-mx6q-mainline'.
> Load address: 0x10800000
> Loading: error frame: 0x4fd76ca0 0x00000804
> T error frame: 0x4fd77f00 0x00000804
>
>
> Before I start digging, is this a known issue?
>
> Wolfgang.
Hi Wolfgang,
This is/was an issue on the first batch of Sabre Lites.
It stemmed from the proper connection of pin 9 on the ethernet jack
(it shouldn't be connected):
https://wiki.linaro.org/Boards/MX6QSabreLite#Gigabit_Ethernet_issue
If you're not in a position to de-solder the pin, contact me off-list
and we'll arrange for a swap.
Regards,
Eric
More information about the U-Boot
mailing list