[U-Boot] [PATCH] mmc: sh_mmcif: enable MMC_MODE_HC
Shimoda, Yoshihiro
yoshihiro.shimoda.uh at renesas.com
Fri Jun 8 04:39:52 CEST 2012
The controller can control high capacity cards. So, the patch adds
the flag. If the flag is not set, "mmcinfo" will fail when a high
capacity card is used.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
---
drivers/mmc/sh_mmcif.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
index 2835e24..4588568 100644
--- a/drivers/mmc/sh_mmcif.c
+++ b/drivers/mmc/sh_mmcif.c
@@ -593,7 +593,7 @@ int mmcif_mmc_init(void)
mmc->f_max = CLKDEV_EMMC_DATA;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT |
- MMC_MODE_8BIT;
+ MMC_MODE_8BIT | MMC_MODE_HC;
memcpy(mmc->name, DRIVER_NAME, sizeof(DRIVER_NAME));
mmc->send_cmd = sh_mmcif_request;
mmc->set_ios = sh_mmcif_set_ios;
--
1.7.1
More information about the U-Boot
mailing list