[U-Boot] [PATCH 1/6] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138

Mikhail Kshevetskiy mikhail.kshevetskiy at gmail.com
Tue Jun 26 12:33:09 CEST 2012


follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) of
OMAP-L138 DSP+ARM Processor Technical Reference Manual

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at gmail.com>
---
 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c |   26 +++++++++++++++++------
 arch/arm/include/asm/arch-davinci/hardware.h    |    1 +
 2 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index df7d6a2..ff2e2e3 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -190,13 +190,21 @@ int da850_ddr_setup(void)
 
 		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
 		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-
-		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
 	}
-
+	setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
 	writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-	clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
-		(1 << DDR_SLEW_CMOSEN_BIT));
+
+	if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
+		/* DDR2 */
+		clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+			(1 << DDR_SLEW_DDR_PDENA_BIT) |
+			(1 << DDR_SLEW_CMOSEN_BIT));
+	} else {
+		/* MOBILE DDR */
+		setbits_le32(&davinci_syscfg1_regs->ddr_slew,
+			(1 << DDR_SLEW_DDR_PDENA_BIT) |
+			(1 << DDR_SLEW_CMOSEN_BIT));
+	}
 
 	/*
 	 * SDRAM Configuration Register (SDCR):
@@ -216,7 +224,11 @@ int da850_ddr_setup(void)
 	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
 
 	/* write memory configuration and timing */
-	writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+	if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
+		/* MOBILE DDR only*/
+		writel(CONFIG_SYS_DA850_DDR2_SDBCR2,
+			&dv_ddr2_regs_ctrl->sdbcr2);
+	}
 	writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
 	writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
 
@@ -240,7 +252,7 @@ int da850_ddr_setup(void)
 
 	/* disable self refresh */
 	clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
-		DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
+		DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
 	writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
 
 	return 0;
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index b145c6e..56e5743 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -505,6 +505,7 @@ struct davinci_syscfg1_regs {
 	((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE)
 
 #define DDR_SLEW_CMOSEN_BIT	4
+#define DDR_SLEW_DDR_PDENA_BIT	5
 
 #define VTP_POWERDWN		(1 << 6)
 #define VTP_LOCK		(1 << 7)
-- 
1.7.10



More information about the U-Boot mailing list