[U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5

[Joonyoung Shim]

2012/6/20 Rajeshwari Birje <rajeshwari.birje at gmail.com>:
> Hi Minkyu Kang,
>
> This being I2C driver code should not have any dependency on EVT0 or EVT1.

I mean *all* arch and driver codes for Exynos5250 should support EVT1 only.

Thanks.

>
> Regards,
> Rajeshwari Shinde.
>
> On Wed, Jun 20, 2012 at 2:01 PM, Minkyu Kang <promsoft at gmail.com> wrote:
>> Dear Rajeshwari Birje,
>>
>> On 19 June 2012 19:57, Rajeshwari Birje <rajeshwari.birje at gmail.com> wrote:
>>> Hi Joonyoung Shim,
>>>
>>> On Tue, Jun 19, 2012 at 1:20 PM, Joonyoung Shim <dofmind at gmail.com> wrote:
>>>> Hi,
>>>>
>>>> I add some comments at the below.
>>>>
>>> -- ok
>>>> And current SMDK5250 uses Exynos5250 EVT0 base codes,
>>>> but i know the kernel supports only Exynos5250 EVT1.
>>>>
>>>> So, let's remove Exynos5250 EVT0 codes and add EVT1 codes at the u-boot also.
>>>> Could you follow up it?
>>>>
>>> -- Yes currently we are working on that
>>
>> So.. do you need to support EVT0? or not?
>> We want to support EVT1 codes only. (without EVT0)
>>
>> Thanks.
>> Minkyu Kang.
>> --
>> from. prom.
>> www.promsoft.net


-- 
- Joonyoung Shim