[U-Boot] [PATCH 2/3] KW: Add kw_adjust_dram() weak function

Prafulla Wadaskar prafulla at marvell.com
Tue Jun 26 14:33:48 CEST 2012



> -----Original Message-----
> From: Marek Vasut [mailto:marex at denx.de]
> Sent: 26 June 2012 17:45
> To: u-boot at lists.denx.de
> Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> Subject: [PATCH 2/3] KW: Add kw_adjust_dram() weak function
> 
> This function shall allow a board to adjust DRAM parameters in case
> there are multiple versions of the board with different DRAM sizes.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Prafulla Wadaskar <prafulla at marvell.com>
> Cc: Wolfgang Denk <wd at denx.de>
> ---
>  arch/arm/cpu/arm926ejs/kirkwood/dram.c |   11 +++++++++++

Instead I would like to suggest to add function name as __kw_post_kwbconfig()

This typically addresses to reconfigure the default configuration done by kwbimage.cfg, so the scope is not limited to DRAM configuration.

Regards..
Prafulla . . .


More information about the U-Boot mailing list