[U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC
Bo Shen
voice.shen at atmel.com
Mon Jun 25 05:13:54 CEST 2012
Hi Marek,
On 6/25/2012 10:57, Marek Vasut wrote:
> Dear Bo Shen,
>
>> Hi Marek,
>>
>> On 6/21/2012 18:17, Marek Vasut wrote:
>>> Dear Bo Shen,
>>>
>>>> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
>>>>
>>>> To enable the USB EHCI, add the following configuration options into
>>>> board relative configuration file and remove USB OHCI options.
>>>>
>>>> #define CONFIG_USB_EHCI
>>>> #define CONFIG_USB_EHCI_ATMEL
>>>> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
>>>>
>>>> Signed-off-by: Bo Shen<voice.shen at atmel.com>
>>>> ---
[...]
>>> btw do you have some user for this code?
>>
>> The at91sam9m10g45ek now uses OHCI, if needed, it can use EHCI. New
>> coming boards will use EHCI.
>
> When do you see such board appearing please?
The at91sam9m10g45ek board has existed in mainline. As to AT91
maintainer has no response, so I just send the EHCI driver separately.
For new boards, I have submitted some patches (Please take the link
as a reference: http://patchwork.ozlabs.org/patch/160581/), but AT91
maintainer has no response and also, not others response.
BRs,
Bo Shen
>
>>> Best regards,
>>> Marek Vasut
>
> Best regards,
> Marek Vasut
More information about the U-Boot
mailing list