[U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138
Christian Riesch
christian.riesch at omicron.at
Tue Jun 5 12:03:07 CEST 2012
Hi,
On Fri, Jun 1, 2012 at 4:30 PM, Prabhakar Lad <prabhakar.lad at ti.com> wrote:
> From: Lad, Prabhakar <prabhakar.lad at ti.com>
>
> This patch adds support for MMC/SD on DA850/OMAP-L138.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj at ti.com>
> Signed-off-by: Hadli, Manjunath <manjunath.hadli at ti.com>
> ---
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 13 ++++++++++
> arch/arm/include/asm/arch-davinci/hardware.h | 1 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 ++
> board/davinci/da8xxevm/da850evm.c | 28 +++++++++++++++++++++++
> include/configs/da850evm.h | 14 +++++++++++
> 5 files changed, 59 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
> index fa07fb5..a95e419 100644
> --- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
> +++ b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
> @@ -169,3 +169,16 @@ const struct pinmux_config emifa_pins_nor[] = {
> { pinmux(12), 1, 6 }, /* EMA_A[1] */
> { pinmux(12), 1, 7 }, /* EMA_A[0] */
> };
> +
> +/* MMC0 pin muxer settings */
> +const struct pinmux_config mmc0_pins[] = {
> + /* GP0[11] is required for SD to work on Rev 3 EVMs */
> + { pinmux(0), 8, 4 }, /* GP0[11] */
Please move GP0[11] to the board specific file, e.g., add it to static
const struct pinmux_config gpio_pins[] in
board/davinci/da8xxevm/da850evm.c. Other boards might use other (or
no) GPIOs for this purpose...
> + { pinmux(10), 2, 0 }, /* MMCSD0_CLK */
> + { pinmux(10), 2, 1 }, /* MMCSD0_CMD */
> + { pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */
> + { pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */
> + { pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */
> + { pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */
> + /* DA850 supports only 4-bit mode, remaining pins are not configured */
> +};
> diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
> index b145c6e..f6b7a2c 100644
> --- a/arch/arm/include/asm/arch-davinci/hardware.h
> +++ b/arch/arm/include/asm/arch-davinci/hardware.h
> @@ -446,6 +446,7 @@ struct davinci_pllc_regs {
> #define DAVINCI_SPI1_CLKID (cpu_is_da830() ? 2 : ASYNC3)
> /* Clock IDs */
> enum davinci_clk_ids {
> + DAVINCI_MMCSD_CLKID = 2,
> DAVINCI_SPI0_CLKID = 2,
> DAVINCI_UART2_CLKID = 2,
> DAVINCI_MMC_CLKID = 2,
> diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
> index 07aceaa..c9ac697 100644
> --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
> +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
> @@ -48,4 +48,7 @@ extern const struct pinmux_config emifa_pins_cs4[1];
> extern const struct pinmux_config emifa_pins_nand[12];
> extern const struct pinmux_config emifa_pins_nor[43];
>
> +/* MMC pin muxer settings */
> +extern const struct pinmux_config mmc0_pins[7];
> +
> #endif
> diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
> index 82d707f..608c652 100644
> --- a/board/davinci/da8xxevm/da850evm.c
> +++ b/board/davinci/da8xxevm/da850evm.c
> @@ -36,6 +36,11 @@
> #include <asm/errno.h>
> #include <hwconfig.h>
>
> +#ifdef CONFIG_DAVINCI_MMC
> +#include <mmc.h>
> +#include <asm/arch/sdmmc_defs.h>
> +#endif
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> #ifdef CONFIG_DRIVER_TI_EMAC
> @@ -204,6 +209,23 @@ int misc_init_r(void)
> return 0;
> }
>
> +#ifdef CONFIG_DAVINCI_MMC
> +static struct davinci_mmc mmc_sd0 = {
> + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
> + .host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */
> + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
> + .version = MMC_CTLR_VERSION_2,
> +};
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
> +
> + /* Add slot-0 to mmc subsystem */
> + return davinci_mmc_init(bis, &mmc_sd0);
> +}
> +#endif
> +
> static const struct pinmux_config gpio_pins[] = {
> #ifdef CONFIG_USE_NOR
> /* GP0[11] is required for NOR to work on Rev 3 EVMs */
> @@ -236,6 +258,9 @@ const struct pinmux_resource pinmuxes[] = {
> PINMUX_ITEM(emifa_pins_nor),
> #endif
> PINMUX_ITEM(gpio_pins),
> +#ifdef CONFIG_DAVINCI_MMC
> + PINMUX_ITEM(mmc0_pins),
> +#endif
> };
>
> const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
> @@ -246,6 +271,9 @@ const struct lpsc_resource lpsc[] = {
> { DAVINCI_LPSC_EMAC }, /* image download */
> { DAVINCI_LPSC_UART2 }, /* console */
> { DAVINCI_LPSC_GPIO },
> +#ifdef CONFIG_DAVINCI_MMC
> + { DAVINCI_LPSC_MMC_SD },
> +#endif
> };
>
> const int lpsc_size = ARRAY_SIZE(lpsc);
> diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
> index 989472b..9301a3b 100644
> --- a/include/configs/da850evm.h
> +++ b/include/configs/da850evm.h
> @@ -313,6 +313,20 @@
> #undef CONFIG_CMD_ENV
> #endif
>
> +/* SD/MMC */
> +#define CONFIG_MMC
> +#define CONFIG_DAVINCI_MMC_SD1
> +#define CONFIG_MMC_MBLOCK
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_DAVINCI_MMC
> +
> +#ifdef CONFIG_MMC
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_MMC
> +#endif
> +
> /* defines for SPL */
> #define CONFIG_SPL
> #define CONFIG_SPL_SPI_SUPPORT
> --
> 1.7.4.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Regards, Christian
More information about the U-Boot
mailing list