[U-Boot] [PATCH 10/10 V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
Rajeshwari Shinde
rajeshwari.s at samsung.com
Fri Jun 29 14:00:40 CEST 2012
This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
Changes in V2:
- None
Changes in V3:
- None.
board/samsung/smdk5250/smdk5250.c | 6 +++---
include/configs/smdk5250.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 3b078da..b593325 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -130,13 +130,13 @@ int board_mmc_init(bd_t *bis)
{
int err;
- err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
if (err) {
- debug("SDMMC2 not configured\n");
+ debug("SDMMC0 not configured\n");
return err;
}
- err = s5p_mmc_init(2, 4);
+ err = s5p_mmc_init(0, 8);
return err;
}
#endif
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 405abd5..d4d370f 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -69,7 +69,7 @@
/* select serial console configuration */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_SERIAL1 /* use SERIAL 1 */
+#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
--
1.7.4.4
More information about the U-Boot
mailing list