[U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.

[Eric Nelson]

On 06/12/2012 10:07 AM, Stefano Babic wrote:
> On 15/05/2012 14:58, Dirk Behme wrote:
>> On 09.05.2012 07:45, Stefano Babic wrote:
>>> On 09/05/2012 01:31, Eric Nelson wrote:
>>>> Thanks Andy,
>>>>
>>>> On 05/08/2012 03:59 PM, Andy Fleming wrote:
>>>>>> --- a/drivers/mmc/fsl_esdhc.c
>>>>>> +++ b/drivers/mmc/fsl_esdhc.c
>>>>>> @@ -190,6 +190,10 @@ static int esdhc_setup_data(struct mmc *mmc,
>>>>>> struct mmc_data *data)
>>>>>>                  esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK,
>>>>>> wml_value);
>>>>>>                  esdhc_write32(&regs->dsaddr, (u32)data->dest);
>>>>>>          } else {
>>>>>> +               flush_dcache_range((ulong)data->src,
>>>>>> +                                  (ulong)data->src+data->blocks
>>>>>> +                                        *data->blocksize);
>>>>>> +
>>>>>
>>>>> This still won't work. I don't believe this is implemented at all on
>>>>> the FSL PowerPC parts that use this controller.
>>>>>
>>>>> At the very least, it needs to be protected by an ifdef.
>>>>>
>>>> It seems more generally useful to implement a PowerPC cache layer
>>>> than to instrument each driver that supports cache.
>>>
>>> Some PowerPC (MPC86xx,  arch/powerpc/cpu/mpc86xx/cache.S) have this
>>> layer, some other not. This driver is used by MPC85xx and
>>> flush_dcache_range is not implemented. The reason is that this SOC  uses
>>> its internal snooping mechanism and does not need to explicitely flush
>>> the buffers in the drivers.
>>>
>>> The problem with an #ifdef is that it is not very generic - we should
>>> add some #if (defined(CONFIG_MX51) || defined(CONFIG_MX53) || ...
>>> and update the driver for each new SOCs. I think also that maybe the
>>> best way is to add an empty flush_dcache_range() to the MPC85xx, maybe
>>> as weak function.
>>
>> You might have noticed that I'm looking through my list of open patches.
>> So: Any news regarding V3 of this patch? ;)
>
> This is my turn to look back if there are some news. Has anyone taken a
> look at it ?
>
> Best regards,
> Stefano Babic
>

Sorry Stefano,

I've been meaning to generate an update but seem to be starving for time.

Some other messages on the list regarding PPC seem to indicate that the
real solution here is a set of cache stubs for PPC, not an SDHC patch though.

I'm not likely to have any time until after FTF next week.

Any chance that a PPC maintainer can chime in here?

Please advise,


Eric