[U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
mathieu.poirier at linaro.org
mathieu.poirier at linaro.org
Mon Jun 18 18:35:42 CEST 2012
From: John Rigby <john.rigby at linaro.org>
Configuration in vexpress and u8500.v1 is different from what
is needed in u8500.v2. As such, card configuration specifics need
to reside in the board file rather than the driver.
Signed-off-by: John Rigby <john.rigby at linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
---
board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +++++-
board/st-ericsson/snowball/snowball.c | 92 ++++++++++++++++++++++-
board/st-ericsson/u8500/u8500_href.c | 22 +++++-
drivers/mmc/arm_pl180_mmci.c | 132 +++++++++++++--------------------
drivers/mmc/arm_pl180_mmci.h | 27 ++++++-
include/configs/snowball.h | 8 ++
6 files changed, 214 insertions(+), 88 deletions(-)
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c
index 0b36d12..d5e109e 100644
--- a/board/armltd/vexpress/ca9x4_ct_vxp.c
+++ b/board/armltd/vexpress/ca9x4_ct_vxp.c
@@ -33,6 +33,8 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <malloc.h>
+#include <errno.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/systimer.h>
@@ -90,8 +92,25 @@ int board_eth_init(bd_t *bis)
int cpu_mmc_init(bd_t *bis)
{
int rc = 0;
+ (void) bis;
#ifdef CONFIG_ARM_PL180_MMCI
- rc = arm_pl180_mmci_init();
+ struct pl180_mmc_host *host;
+
+ host = malloc(sizeof(struct pl180_mmc_host));
+ if (!host)
+ return -ENOMEM;
+ memset(host, 0, sizeof(*host));
+
+ strcpy(host->name, "MMC");
+ host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
+ host->pwr_init = INIT_PWR;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
+ host->voltages = VOLTAGE_WINDOW_MMC;
+ host->caps = 0;
+ host->clock_in = ARM_MCLK;
+ host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
+ host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
+ rc = arm_pl180_mmci_init(host);
#endif
return rc;
}
diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
index 2c01bc1..a44847c 100644
--- a/board/st-ericsson/snowball/snowball.c
+++ b/board/st-ericsson/snowball/snowball.c
@@ -29,6 +29,9 @@
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
+#ifdef CONFIG_MMC
+#include "../../../drivers/mmc/arm_pl180_mmci.h"
+#endif
#include "db8500_pins.h"
/*
@@ -269,9 +272,96 @@ int board_late_init(void)
if ((raise_ab8500_gpio16() < 0))
printf("error: cant' raise GPIO16\n");
+ return 0;
+}
+
#ifdef CONFIG_MMC
+/*
+ * emmc_host_init - initialize the emmc controller.
+ * Configure GPIO settings, set initial clock and power for emmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int emmc_host_init(void)
+{
+ struct pl180_mmc_host *host;
+
+ host = malloc(sizeof(struct pl180_mmc_host));
+ if (!host)
+ return -ENOMEM;
+ memset(host, 0, sizeof(*host));
+
+ host->base = (struct sdi_registers *)CFG_EMMC_BASE;
+ host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
+ SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+ strcpy(host->name, "EMMC");
+ host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
+ host->voltages = VOLTAGE_WINDOW_MMC;
+ host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
+ host->clock_max = ARM_MCLK / 2;
+ host->clock_in = ARM_MCLK;
+ host->version2 = 1;
+
+ return arm_pl180_mmci_init(host);
+}
+
+/*
+ * mmc_host_init - initialize the external mmc controller.
+ * Configure GPIO settings, set initial clock and power for mmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int mmc_host_init(void)
+{
+ struct pl180_mmc_host *host;
+ u32 sdi_u32;
+
+ host = malloc(sizeof(struct pl180_mmc_host));
+ if (!host)
+ return -ENOMEM;
+ memset(host, 0, sizeof(*host));
+
+ host->base = (struct sdi_registers *)CFG_MMC_BASE;
+ sdi_u32 = 0xBF;
+ writel(sdi_u32, &host->base->power);
+ host->pwr_init = 0xBF;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
+ SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+ strcpy(host->name, "MMC");
+ host->caps = MMC_MODE_8BIT;
+ host->b_max = 0;
+ host->voltages = VOLTAGE_WINDOW_SD;
+ host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
+ host->clock_max = ARM_MCLK / 2;
+ host->clock_in = ARM_MCLK;
+ host->version2 = 1;
+
+ return arm_pl180_mmci_init(host);
+}
+
+/*
+ * board_mmc_init - initialize all the mmc/sd host controllers.
+ * Called by generic mmc framework.
+ */
+int board_mmc_init(bd_t *bis)
+{
+ int error;
+
+ (void) bis;
+
+ error = emmc_host_init();
+ if (error) {
+ printf("emmc_host_init() %d\n", error);
+ return -1;
+ }
+
u8500_mmc_power_init();
-#endif /* CONFIG_MMC */
+
+ error = mmc_host_init();
+ if (error) {
+ printf("mmc_host_init() %d\n", error);
+ return -1;
+ }
return 0;
}
+#endif /* CONFIG_MMC */
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
index e75f8b4..f06120c 100644
--- a/board/st-ericsson/u8500/u8500_href.c
+++ b/board/st-ericsson/u8500/u8500_href.c
@@ -18,6 +18,7 @@
#include <config.h>
#include <common.h>
+#include <malloc.h>
#include <i2c.h>
#include <asm/types.h>
#include <asm/io.h>
@@ -375,12 +376,27 @@ static int u8500_mmci_board_init(void)
int board_mmc_init(bd_t *bd)
{
+ struct pl180_mmc_host *host;
+
if (u8500_mmci_board_init())
return -ENODEV;
- if (arm_pl180_mmci_init())
- return -ENODEV;
- return 0;
+ host = malloc(sizeof(struct pl180_mmc_host));
+ if (!host)
+ return -ENOMEM;
+ memset(host, 0, sizeof(*host));
+
+ strcpy(host->name, "MMC");
+ host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
+ host->pwr_init = INIT_PWR;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
+ host->voltages = VOLTAGE_WINDOW_MMC;
+ host->caps = 0;
+ host->clock_in = ARM_MCLK;
+ host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
+ host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
+
+ return arm_pl180_mmci_init(host);
}
#endif
diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index 09d443e..2966520 100644
--- a/drivers/mmc/arm_pl180_mmci.c
+++ b/drivers/mmc/arm_pl180_mmci.c
@@ -32,14 +32,10 @@
#include "arm_pl180_mmci.h"
#include <malloc.h>
-struct mmc_host {
- struct sdi_registers *base;
-};
-
static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
{
u32 hoststatus, statusmask;
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL;
if ((cmd->resp_type & MMC_RSP_PRESENT))
@@ -53,8 +49,8 @@ static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
writel(statusmask, &host->base->status_clear);
if (hoststatus & SDI_STA_CTIMEOUT) {
- printf("CMD%d time out\n", cmd->cmdidx);
- return -ETIMEDOUT;
+ debug("CMD%d time out\n", cmd->cmdidx);
+ return TIMEOUT;
} else if ((hoststatus & SDI_STA_CCRCFAIL) &&
(cmd->flags & MMC_RSP_CRC)) {
printf("CMD%d CRC error\n", cmd->cmdidx);
@@ -80,7 +76,8 @@ static int do_command(struct mmc *dev, struct mmc_cmd *cmd)
{
int result;
u32 sdi_cmd = 0;
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
+ u32 lap = 0;
sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN);
@@ -112,7 +109,7 @@ static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize)
{
u32 *tempbuff = dest;
u64 xfercount = blkcount * blksize;
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
u32 status, status_err;
debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
@@ -168,7 +165,7 @@ static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize)
u32 *tempbuff = src;
int i;
u64 xfercount = blkcount * blksize;
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
u32 status, status_err;
debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
@@ -227,14 +224,19 @@ static int do_data_transfer(struct mmc *dev,
struct mmc_data *data)
{
int error = -ETIMEDOUT;
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
u32 blksz = 0;
u32 data_ctrl = 0;
u32 data_len = (u32) (data->blocks * data->blocksize);
- blksz = (ffs(data->blocksize) - 1);
- data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK);
- data_ctrl |= SDI_DCTRL_DTEN;
+ if (!host->version2) {
+ blksz = (ffs(data->blocksize) - 1);
+ data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK);
+ } else {
+ blksz = data->blocksize;
+ data_ctrl |= (blksz << SDI_DCTRL_DBLOCKSIZE_V2_SHIFT);
+ }
+ data_ctrl |= SDI_DCTRL_DTEN | SDI_DCTRL_BUSYMODE;
writel(SDI_DTIMER_DEFAULT, &host->base->datatimer);
writel(data_len, &host->base->datalength);
@@ -257,7 +259,7 @@ static int do_data_transfer(struct mmc *dev,
writel(data_ctrl, &host->base->datactrl);
error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks,
- (u32)data->blocksize);
+ (u32)data->blocksize);
}
return error;
@@ -280,17 +282,16 @@ static int host_request(struct mmc *dev,
/* MMC uses open drain drivers in the enumeration phase */
static int mmc_host_reset(struct mmc *dev)
{
- struct mmc_host *host = dev->priv;
- u32 sdi_u32 = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+ struct pl180_mmc_host *host = dev->priv;
- writel(sdi_u32, &host->base->power);
+ writel(host->pwr_init, &host->base->power);
return 0;
}
static void host_set_ios(struct mmc *dev)
{
- struct mmc_host *host = dev->priv;
+ struct pl180_mmc_host *host = dev->priv;
u32 sdi_clkcr;
sdi_clkcr = readl(&host->base->clock);
@@ -298,15 +299,26 @@ static void host_set_ios(struct mmc *dev)
/* Ramp up the clock rate */
if (dev->clock) {
u32 clkdiv = 0;
+ u32 tmp_clock;
- if (dev->clock >= dev->f_max)
+ if (dev->clock >= dev->f_max) {
+ clkdiv = 0;
dev->clock = dev->f_max;
+ } else {
+ clkdiv = (host->clock_in / dev->clock) - 2;
+ }
- clkdiv = ((ARM_MCLK / dev->clock) / 2) - 1;
+ tmp_clock = host->clock_in / (clkdiv + 2);
+ while (tmp_clock > dev->clock) {
+ clkdiv++;
+ tmp_clock = host->clock_in / (clkdiv + 2);
+ }
if (clkdiv > SDI_CLKCR_CLKDIV_MASK)
clkdiv = SDI_CLKCR_CLKDIV_MASK;
+ tmp_clock = host->clock_in / (clkdiv + 2);
+ dev->clock = tmp_clock;
sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK);
sdi_clkcr |= clkdiv;
}
@@ -322,8 +334,11 @@ static void host_set_ios(struct mmc *dev)
case 4:
buswidth |= SDI_CLKCR_WIDBUS_4;
break;
+ case 8:
+ buswidth |= SDI_CLKCR_WIDBUS_8;
+ break;
default:
- printf("Invalid bus width\n");
+ printf("Invalid bus width: %d\n", dev->bus_width);
break;
}
sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK);
@@ -334,83 +349,40 @@ static void host_set_ios(struct mmc *dev)
udelay(CLK_CHANGE_DELAY);
}
-struct mmc *alloc_mmc_struct(void)
-{
- struct mmc_host *host = NULL;
- struct mmc *mmc_device = NULL;
-
- host = malloc(sizeof(struct mmc_host));
- if (!host)
- return NULL;
-
- mmc_device = malloc(sizeof(struct mmc));
- if (!mmc_device)
- goto err;
-
- mmc_device->priv = host;
- return mmc_device;
-
-err:
- free(host);
- return NULL;
-}
-
/*
* mmc_host_init - initialize the mmc controller.
* Set initial clock and power for mmc slot.
* Initialize mmc struct and register with mmc framework.
*/
-static int arm_pl180_mmci_host_init(struct mmc *dev)
+int arm_pl180_mmci_init(struct pl180_mmc_host *host)
{
- struct mmc_host *host = dev->priv;
+ struct mmc *dev;
u32 sdi_u32;
- host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
+ dev = malloc(sizeof(struct mmc));
+ if (!dev)
+ return -ENOMEM;
- /* Initially set power-on, full voltage & MMCI read */
- sdi_u32 = INIT_PWR;
- writel(sdi_u32, &host->base->power);
+ memset(dev, 0, sizeof(struct mmc));
+ dev->priv = host;
- /* setting clk freq 505KHz */
- sdi_u32 = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN;
- writel(sdi_u32, &host->base->clock);
+ writel(host->pwr_init, &host->base->power);
+ writel(host->clkdiv_init, &host->base->clock);
udelay(CLK_CHANGE_DELAY);
/* Disable mmc interrupts */
sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK;
writel(sdi_u32, &host->base->mask0);
-
- sprintf(dev->name, "MMC");
- dev->clock = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT + 1));
+ strncpy(dev->name, host->name, sizeof(dev->name));
dev->send_cmd = host_request;
dev->set_ios = host_set_ios;
dev->init = mmc_host_reset;
dev->getcd = NULL;
- dev->host_caps = 0;
- dev->voltages = VOLTAGE_WINDOW_MMC;
- dev->f_min = dev->clock;
- dev->f_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
-
- return 0;
-}
-
-int arm_pl180_mmci_init(void)
-{
- int error;
- struct mmc *dev;
-
- dev = alloc_mmc_struct();
- if (!dev)
- return -1;
-
- error = arm_pl180_mmci_host_init(dev);
- if (error) {
- printf("mmci_host_init error - %d\n", error);
- return -1;
- }
-
- dev->b_max = 0;
-
+ dev->host_caps = host->caps;
+ dev->voltages = host->voltages;
+ dev->f_min = host->clock_min;
+ dev->f_max = host->clock_max;
+ dev->b_max = host->b_max;
mmc_register(dev);
debug("registered mmc interface number is:%d\n", dev->block_dev.dev);
diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h
index 42fbe3e..06709ed 100644
--- a/drivers/mmc/arm_pl180_mmci.h
+++ b/drivers/mmc/arm_pl180_mmci.h
@@ -26,8 +26,6 @@
#ifndef __ARM_PL180_MMCI_H__
#define __ARM_PL180_MMCI_H__
-int arm_pl180_mmci_init(void);
-
#define COMMAND_REG_DELAY 300
#define DATA_REG_DELAY 1000
#define CLK_CHANGE_DELAY 2000
@@ -59,8 +57,13 @@ int arm_pl180_mmci_init(void);
#define SDI_CLKCR_WIDBUS_MASK 0x00001800
#define SDI_CLKCR_WIDBUS_1 0x00000000
#define SDI_CLKCR_WIDBUS_4 0x00000800
+/* V2 only */
+#define SDI_CLKCR_WIDBUS_8 0x00001000
+#define SDI_CLKCR_NEDGE 0x00002000
+#define SDI_CLKCR_HWFC_EN 0x00004000
-#define SDI_CLKCR_CLKDIV_INIT 0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */
+#define SDI_CLKCR_CLKDIV_INIT_V1 0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */
+#define SDI_CLKCR_CLKDIV_INIT_V2 0x000000FD
/* SDI command register bits */
#define SDI_CMD_CMDINDEX_MASK 0x000000FF
@@ -144,6 +147,8 @@ int arm_pl180_mmci_init(void);
#define SDI_DCTRL_DBOOTMODEEN 0x00002000
#define SDI_DCTRL_BUSYMODE 0x00004000
#define SDI_DCTRL_DDR_MODE 0x00008000
+#define SDI_DCTRL_DBLOCKSIZE_V2_MASK 0x7fff0000
+#define SDI_DCTRL_DBLOCKSIZE_V2_SHIFT 16
#define SDI_FIFO_BURST_SIZE 8
@@ -180,4 +185,20 @@ struct sdi_registers {
u32 pcell_id3; /* 0xFFC*/
};
+struct pl180_mmc_host {
+ struct sdi_registers *base;
+ char name[32];
+ unsigned int b_max;
+ unsigned int voltages;
+ unsigned int caps;
+ unsigned int clock_in;
+ unsigned int clock_min;
+ unsigned int clock_max;
+ unsigned int clkdiv_init;
+ unsigned int pwr_init;
+ int version2;
+};
+
+int arm_pl180_mmci_init(struct pl180_mmc_host *);
+
#endif
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index e9f4fb1..605ba0e 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -246,6 +246,14 @@
#endif
/*
+ * MMC related configs
+ */
+#define CONFIG_ARM_PL180_MMCI
+#define MMC_BLOCK_SIZE 512
+#define CFG_EMMC_BASE 0x80114000
+#define CFG_MMC_BASE 0x80126000
+
+/*
* FLASH and environment organization
*/
#define CONFIG_SYS_NO_FLASH
--
1.7.5.4
More information about the U-Boot
mailing list