[U-Boot] [PATCH 3/4] OMAP3: twister: add video support

Tom Rini trini at ti.com
Thu Jun 21 03:15:53 CEST 2012


On Thu, Jun 14, 2012 at 10:29:47AM +0200, Stefano Babic wrote:

> Signed-off-by: Stefano Babic <sbabic at denx.de>
[snip]
> +static GraphicDevice panel;
> +static const struct panel_config lcd_cfg = {
> +	.timing_h	= 0x01101d1b, /* Horizontal timing */
> +	.timing_v	= 0x01400b02, /* Vertical timing */
> +	.pol_freq	= 0x00023000, /* Pol Freq */
> +	.divisor	= 0x0001000d, /* 33Mhz Pixel Clock */
> +	.lcd_size	= ((YRES - 1) << 16 | (XRES - 1)),
> +	.panel_type	= 0x01, /* TFT */
> +	.data_lines	= 0x03, /* 24 Bit RGB */
> +	.load_mode	= 0x02 /* Frame Mode */
> +};

You need #if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
type testing here[1] that the mt_ventoux board patch has.  Shall I or
will you v2?  And I'll sanity test this on omap3_beagle tomorrow, but I
suspect it's fine :)

[1]: twister.c:50: warning: 'panel' defined but not used

-- 
Tom


More information about the U-Boot mailing list