[U-Boot] [PATCH v2 12/14] arm/km: support the 2 PCIe fpga resets
Holger Brunck
holger.brunck at keymile.com
Wed Jun 13 15:33:18 CEST 2012
From: Valentin Longchamp <valentin.longchamp at keymile.com>
The PCIe FPGAs now have to support 2 resets: one for the non traffic
affecting part (PCIe) and one for the traffic affecting part.
When the FPGA is not reconfigured, we only reset the PCIe part.
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
cc: Holger Brunck <holger.brunck at keymile.com>
cc: Prafulla Wadaskar <prafulla at marvell.com>
---
changes for v2:
- nothing
board/keymile/km_arm/fpga_config.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c
index 8ac6393..fcc5fe6 100644
--- a/board/keymile/km_arm/fpga_config.c
+++ b/board/keymile/km_arm/fpga_config.c
@@ -99,7 +99,7 @@ static int boco_set_bits(u8 reg, u8 flags)
#define FPGA_INIT_B 0x10
#define FPGA_DONE 0x20
-static int fpga_done()
+static int fpga_done(void)
{
int ret = 0;
u8 regval;
@@ -206,25 +206,30 @@ int wait_for_fpga_config(void)
}
#define PRST1 0x4
-#define BRIDGE_RST 0x4
+#define PCIE_RST 0x10
+#define TRAFFIC_RST 0x04
int fpga_reset(void)
{
int ret = 0;
+ u8 resets;
if (!check_boco2()) {
/* we do not have BOCO2, this is not really used */
return 0;
}
- ret = boco_clear_bits(PRST1, BRIDGE_RST);
+ /* if we have skipped, we only want to reset the PCIe part */
+ resets = skip ? PCIE_RST : PCIE_RST | TRAFFIC_RST;
+
+ ret = boco_clear_bits(PRST1, resets);
if (ret)
return ret;
/* small delay for the pulse */
udelay(10);
- ret = boco_set_bits(PRST1, BRIDGE_RST);
+ ret = boco_set_bits(PRST1, resets);
if (ret)
return ret;
--
1.7.1
More information about the U-Boot
mailing list