[U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents

[Marek Vasut]

Dear Fabio Estevam,

> commit 419ea2d84 (mx28: Split the README into a common part and a m28
> specific part) missed an entry in the Contents section that was part of
> the original file.
> 
> Add the missing entry for completeness.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Please add my evil

Acked-by: Marek Vasut <marex at denx.de>

> ---
> Changes since v2:
> - Use 'into NAND' also in the middle of text rather than only in the
> Content section Change since v1:
> - Fix completion->completeness , for->into
>  doc/README.mx28_common |    5 +++--
>  1 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/doc/README.mx28_common b/doc/README.mx28_common
> index 448d221..f73978d 100644
> --- a/doc/README.mx28_common
> +++ b/doc/README.mx28_common
> @@ -19,6 +19,7 @@ Contents
>  1) Prerequisites
>  2) Compiling U-Boot for a MX28 based board
>  3) Installation of U-Boot for a MX28 based board to SD card
> +4) Installation of U-Boot into NAND flash
> 
>  1) Prerequisites
>  ----------------
> @@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the
> "mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch
> takes the sector number as an argument.
> 
> -4) Installation of U-Boot for NAND flash
> ------------------------------------------------
> +4) Installation of U-Boot into NAND flash
> +-----------------------------------------
> 
>  To boot a MX28 based board from NAND, set the boot mode DIP switches
> according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND
> 1.8 V.

Best regards,
Marek Vasut