[U-Boot] problem while making kernel up

Manukumar manukumar at signal-networks.com
Wed Jun 6 10:13:52 CEST 2012


Hello scott,

The issue is solved by making baud rate correction.
thank you

manukumar
signal-networks

On Fri, 2012-06-01 at 12:15 -0500, Scott Wood wrote:
> On 06/01/2012 05:10 AM, Manukumar wrote:
> > Hello scott.
> > 
> > I can able make the kernel up but it hangs after probing 
> > serial driver as shown below:
> > 
> > It has to boot further but its not happenig..
> > I have attached the file i should get the log as this i also mentioned
> > where it hangs...
> > 
> > what may be the problem with this how could i fix this issue.
> 
> This is getting off topic for the U-Boot list.  Plus, it looks like
> you're using a Freescale-provided kernel.  Please e-mail
> support at freescale.com, or try the latest upstream kernel and get help
> from linuxppc-dev at lists.ozlabs.org.
> 
> But in this case, since this is your custom board, and it works on the
> evaluation board, this is something you'll need to debug yourself (or
> hire someone to debug).
> 
> Given the place where it hangs, the obvious suggestion is to make sure
> the baud rate and serial input clock are correct.
> 
> -Scott
> 





More information about the U-Boot mailing list