[U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.
Xie Shaohui-B21989
B21989 at freescale.com
Wed Jun 27 11:31:07 CEST 2012
Hello, Andy,
Do you have any comment for this patch, if no could you help apply it?
Best Regards,
Shaohui Xie
>-----Original Message-----
>From: Xie Shaohui-B21989
>Sent: Tuesday, June 12, 2012 4:11 PM
>To: u-boot at lists.denx.de
>Cc: Xie Shaohui-B21989
>Subject: [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.
>
>Provides a tool to build boot Image for PBL(Pre boot loader) which is used
>on Freescale CoreNet SoCs, PBL can be used to load some instructions
>and/or data for pre-initialization. The default output image is u-boot.pbl,
>for more details please refer to doc/README.pblimage.
>
>Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
>---
>changes for v3:
>1. dump config.mk, aligned to comment of Wolfgang Denk; 2. split one
>configuration file to two, one is for RCW, one is for PBI commands, add
>second entry in mkimage for second configuration file, aligned to comment
>of Wood Scott; 3. refined the README.pblimage;
>
> Makefile | 6 +
> board/freescale/corenet_ds/pbi.cfg | 51 ++++++
> board/freescale/corenet_ds/rcw.cfg | 32 ++++
> common/image.c | 1 +
> doc/README.pblimage | 114 +++++++++++++
> include/configs/corenet_ds.h | 2 +
> include/image.h | 1 +
> tools/Makefile | 2 +
> tools/mkimage.c | 15 ++
> tools/mkimage.h | 3 +
> tools/pblimage.c | 328
>++++++++++++++++++++++++++++++++++++
> tools/pblimage.h | 36 ++++
> 12 files changed, 591 insertions(+), 0 deletions(-) create mode 100644
>board/freescale/corenet_ds/pbi.cfg
> create mode 100644 board/freescale/corenet_ds/rcw.cfg
> create mode 100644 doc/README.pblimage
> create mode 100644 tools/pblimage.c
> create mode 100644 tools/pblimage.h
>
More information about the U-Boot
mailing list