[U-Boot] [PATCH v3 9/9] da850/omap-l138: add support for direct NOR boot mode

[Prabhakar Lad]

From: Lad, Prabhakar <prabhakar.lad at ti.com>

This patch adds support for direct NOR boot mode on
da850/omap-l138. Added da850evm_direct_nor entry in
boards.cfg to allow to build targets.

Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj at ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli at ti.com>
---
Changes for v2:
 1: Added entry in boards.cfg to build target for
    direct NOR boot mode.
Changes for v3:
 1: Patch number chnaged due to patch split up of
    patch 6 of v2.

 boards.cfg                 |    1 +
 include/configs/da850evm.h |   22 ++++++++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/boards.cfg b/boards.cfg
index 0dee43f..2685b73 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -122,6 +122,7 @@ cam_enc_4xx                  arm         arm926ejs   cam_enc_4xx         ait
 da830evm                     arm         arm926ejs   da8xxevm            davinci        davinci
 da850_am18xxevm              arm         arm926ejs   da8xxevm            davinci        davinci     da850evm:DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50
 da850evm                     arm         arm926ejs   da8xxevm            davinci        davinci     da850evm:MAC_ADDR_IN_SPIFLASH
+da850evm_direct_nor          arm         arm926ejs   da8xxevm            davinci        davinci     da850evm:MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT
 davinci_dm355evm             arm         arm926ejs   dm355evm            davinci        davinci
 davinci_dm355leopard         arm         arm926ejs   dm355leopard        davinci        davinci
 davinci_dm365evm             arm         arm926ejs   dm365evm            davinci        davinci
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index a85d6e4..6f3fd1b 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -27,7 +27,10 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
+/* check if direct NOR boot config is used */
+#ifndef CONFIG_DIRECT_NOR_BOOT
 #define CONFIG_USE_SPIFLASH
+#endif
 
 
 /*
@@ -43,10 +46,19 @@
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_TEXT_BASE		0xc1080000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 
+#ifdef CONFIG_DIRECT_NOR_BOOT
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DA8XX_GPIO
+#define CONFIG_SYS_TEXT_BASE		0x60000000
+#define CONFIG_SYS_DV_NOR_BOOT_CFG	(0x11)
+#define CONFIG_DA850_LOWLEVEL
+#else
+#define CONFIG_SYS_TEXT_BASE		0xc1080000
+#endif
+
 /*
  * Memory Info
  */
@@ -368,6 +380,7 @@
 #define CONFIG_CMD_MMC
 #endif
 
+#ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -377,7 +390,7 @@
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000
 #define CONFIG_SPL_MAX_SIZE	32768
-
+#endif
 
 /* Load U-Boot Image From MMC */
 #ifdef CONFIG_SPL_MMC_LOAD
@@ -390,6 +403,11 @@
 
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
+
+#ifdef CONFIG_DIRECT_NOR_BOOT
+#define CONFIG_SYS_INIT_SP_ADDR		0x8001ff00
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 					GENERATED_GBL_DATA_SIZE)
+#endif /* CONFIG_DIRECT_NOR_BOOT */
 #endif /* __CONFIG_H */
-- 
1.7.4.1