[U-Boot] [PATCH v4 5/9] da850/omap-l138: Define SPI specific configs for SPL only when SPI is used
Prabhakar Lad
prabhakar.lad at ti.com
Mon Jun 25 09:35:19 CEST 2012
From: Lad, Prabhakar <prabhakar.lad at ti.com>
define SPI specific configs for SPL only when CONFIG_USE_SPIFLASH
config is defined
Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj at ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli at ti.com>
---
Changes for v2: None
Changes for v3:
1: Created a new patch by splitting patch 6 of v2
for better readability.
Changes for v4: None
include/configs/da850evm.h | 17 ++++++++++-------
1 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 4546e0f..4e5f160 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -155,6 +155,16 @@
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#ifdef CONFIG_USE_SPIFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
+#endif
+
/*
* I2C Configuration
*/
@@ -334,11 +344,6 @@
/* defines for SPL */
#define CONFIG_SPL
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS 0
-#define CONFIG_SPL_SPI_CS 0
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -346,8 +351,6 @@
#define CONFIG_SPL_STACK 0x8001ff00
#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_SIZE 32768
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
/* additions for new relocation code, must added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
--
1.7.4.1
More information about the U-Boot
mailing list