[U-Boot] [PATCH 2/3] ARM: mx6: Remove CONFIG_ARCH_CPU_INIT

[Fabio Estevam]

No need to define CONFIG_ARCH_CPU_INIT.

All mx6 based boards should use arch_cpu_init().

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/armv7/mx6/soc.c    |    2 --
 include/configs/mx6qarm2.h      |    1 -
 include/configs/mx6qsabrelite.h |    1 -
 3 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 2ac74b5..2d07099 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -37,7 +37,6 @@ u32 get_cpu_rev(void)
 	return system_rev;
 }
 
-#ifdef CONFIG_ARCH_CPU_INIT
 void init_aips(void)
 {
 	struct aipstz_regs *aips1, *aips2;
@@ -77,7 +76,6 @@ int arch_cpu_init(void)
 
 	return 0;
 }
-#endif
 
 #if defined(CONFIG_FEC_MXC)
 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 0962d3c..87ff0a3 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -37,7 +37,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MXC_GPIO
 
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 93000f0..85e6570 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -37,7 +37,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MXC_GPIO
 
-- 
1.7.1