March 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Mar 1 00:14:56 CET 2012
Ending: Sat Mar 31 23:40:22 CEST 2012
Messages: 2498

• [U-Boot] Nand dump and nand bad block disagree   Scott Wood
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4] sh: i2c: Add support I2C controller of SH7734   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: move gd/bd to bss by default   Mike Frysinger
• [U-Boot] [PATCH] powerpc/85xx:Fix lds for nand boot debug info   Prabhakar Kushwaha
• [U-Boot] [PATCH] sh: timer: Remove unnecessary variable 'ticks'   Nobuhiro Iwamatsu
• [U-Boot] u-boot.lds question   Will Khan
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Dirk Behme
• [U-Boot] [PATCH] nios2: move gd and bd into BSS   Thomas Chou
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Heiko Schocher
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Igor Grinberg
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Orjan Friberg
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   puneets
• [U-Boot] Yaffs2 Patches for u-boot-2009.01   VISWANADHULA BALAJI
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Marek Vasut
• [U-Boot] Yaffs2 Patches for u-boot-2009.01   Marek Vasut
• [U-Boot] Yaffs2 Patches for u-boot-2009.01   Graeme Russ
• [U-Boot] Yaffs2 Patches for u-boot-2009.01   Marek Vasut
• [U-Boot] Yaffs2 Patches for u-boot-2009.01   VISWANADHULA BALAJI
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   puneets
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Marek Vasut
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Fabio Estevam
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Fabio Estevam
• [U-Boot] [PATCH 2/3] ARM: mx6: Remove CONFIG_ARCH_CPU_INIT   Fabio Estevam
• [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT   Fabio Estevam
• [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t   Albert ARIBAUD
• [U-Boot] [PATCH V2 00/18] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon   R Sricharan
• [U-Boot] [PATCH V2 01/18] OMAP5: clocks: Change clock settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH V2 02/18] OMAP5: board: Add pinmux data for omap5_evm board.   R Sricharan
• [U-Boot] [PATCH V2 03/18] OMAP5: io: Configure the io settings for omap5430 sevm board.   R Sricharan
• [U-Boot] [PATCH V2 04/18] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   R Sricharan
• [U-Boot] [PATCH V2 06/18] OMAP5: hwinit: Add the missing break statement   R Sricharan
• [U-Boot] [PATCH V2 07/18] OMAP4/5: Make the silicon revision variable common.   R Sricharan
• [U-Boot] [PATCH V2 08/18] OMAP5: SRAM: Change the SRAM base address.   R Sricharan
• [U-Boot] [PATCH V2 09/18] OMAP4/5: Make the sysctrl structure common   R Sricharan
• [U-Boot] [PATCH V2 10/18] OMAP4/5: device: Add support to get the device type.   R Sricharan
• [U-Boot] [PATCH V2 11/18] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   R Sricharan
• [U-Boot] [PATCH V2 12/18] OMAP5: ddr: Change the ddr device name.   R Sricharan
• [U-Boot] [PATCH V2 13/18] OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.   R Sricharan
• [U-Boot] [PATCH V2 14/18] arm: omap5: correct boot device mode7 for eMMC   R Sricharan
• [U-Boot] [PATCH V2 15/18] power: twl6035: add palmas PMIC support   R Sricharan
• [U-Boot] [PATCH V2 16/18] omap5: pbias ldo9 turn on   R Sricharan
• [U-Boot] [PATCH V2 17/18] mmc: omap5evm: Add eMMC saveenv support   R Sricharan
• [U-Boot] [PATCH V2 18/18] OMAP5: reset: Use cold reset in case of 5430ES1.0   R Sricharan
• [U-Boot] usb ethernet working on panda?   Kumar Gala
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Fabio Estevam
• [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t   Peter Barada
• [U-Boot] [PATCH] nios2: move gd and bd into BSS   Mike Frysinger
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Scott Wood
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Jonathan Solnit
• [U-Boot] [PATCH v7 15/20] tegra: fdt: Add function to return peripheral/clock ID   Tom Warren
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: mx6: Remove CONFIG_ARCH_CPU_INIT   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT   Marek Vasut
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Fabio Estevam
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Marek Vasut
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Mike Frysinger
• [U-Boot] u-boot.lds question   Mike Frysinger
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Fabio Estevam
• [U-Boot] [PATCH 1/3] gplugd: use CONFIG_MACH_TYPE instead of MACH_TYPE_SHEEVAD   Troy Kisky
• [U-Boot] [PATCH 2/3] ventana: define CONFIG_MACH_VENTANA   Troy Kisky
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Troy Kisky
• [U-Boot] [PATCH 1/3] mtd/NAND: Add FSMC driver support   Scott Wood
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Simon Glass
• [U-Boot] [PATCH 2/3] ventana: define CONFIG_MACH_VENTANA   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Stephen Warren
• [U-Boot] i2c support for u-boot   yannick.niane at micromentis.com
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Albert ARIBAUD
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa / fix   Albert ARIBAUD
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Graeme Russ
• [U-Boot] u-boot.lds question   Will Khan
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Troy Kisky
• [U-Boot] u-boot.lds question   Mike Frysinger
• [U-Boot] [PATCH 0/4] OMAP3+: Fix voltage bringup sequence   Nishanth Menon
• [U-Boot] [PATCH 1/4] OMAP3+: Introduce generic logic for OMAP voltage controller   Nishanth Menon
• [U-Boot] [PATCH 2/4] OMAP4460: TPS Ensure SET1 is selected after voltage configuration   Nishanth Menon
• [U-Boot] [PATCH 3/4] OMAP4: scale voltage of core before MPU scales   Nishanth Menon
• [U-Boot] [PATCH 4/4] OMAP5: scale voltage of core before MPU scales   Nishanth Menon
• [U-Boot] [PATCH 2/3] ventana: define CONFIG_MACH_VENTANA   Stephen Warren
• [U-Boot] [PATCH v2] nios2: move gd and bd into BSS   Thomas Chou
• [U-Boot] Patch mkimage : Imx Boot Image Support   Bud Miljkovic
• [U-Boot] [PATCH v2] nios2: move gd and bd into BSS   Mike Frysinger
• [U-Boot] [PATCH v4] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] Patch mkimage : Imx Boot Image Support   Fabio Estevam
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] u-boot.lds question   Will Khan
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Mike Frysinger
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Amit Virdi
• [U-Boot] i2c support for u-boot   Heiko Schocher
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Wolfgang Denk
• [U-Boot] [PATCH] Avoid using GNU basename   Wolfgang Denk
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Stefan Roese
• [U-Boot] [PATCH] mkenvimage: fix usage message   Wolfgang Denk
• [U-Boot] [v3 1/3] USB: Armada100: Add UTMI PHY interface driver   Prafulla Wadaskar
• [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs   Prafulla Wadaskar
• [U-Boot] [v3 3/3] Armada100: gplugD: Add USB command support   Prafulla Wadaskar
• [U-Boot] [PATCH] Armada100: gplugD: Add FAT & EXT2 command support   Prafulla Wadaskar
• [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Orjan Friberg
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Christian Riesch
• [U-Boot] Do we really need CONFIG_ARCH_CPU_INIT ?   Christian Riesch
• [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs   Marek Vasut
• [U-Boot] [PATCH] Armada100: gplugD: Add FAT & EXT2 command support   Marek Vasut
• [U-Boot] [PULL] U-Boot USB   Marek Vasut
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Graeme Russ
• [U-Boot] [PATCH 1/3] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address   Amit Virdi
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Amit Virdi
• [U-Boot] usb ethernet working on panda?   Govindraj
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] EXYNOS: Add structure for Exynos4 DMC   Chander Kashyap
• [U-Boot] [PATCH 1/4] ARM926EJS: Implement cache operations   Marek Vasut
• [U-Boot] [PATCH 2/4] i.MX28: Enable caches by default   Marek Vasut
• [U-Boot] [PATCH 3/4] i.MX28: Add cache support into the APBH DMA driver   Marek Vasut
• [U-Boot] [PATCH 4/4] i.MX28: Add cache support to MXS NAND driver   Marek Vasut
• [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set   Stefan Roese
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Stefan Roese
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH] Avoid using GNU basename   Keith Mok
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] Avoid using GNU basename   Wolfgang Denk
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Wolfgang Denk
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Scott Wood
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Stephen Warren
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Mike Frysinger
• [U-Boot] [PATCH] mkenvimage: fix usage message   Mike Frysinger
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Troy Kisky
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: Update mach-types   Troy Kisky
• [U-Boot] "CONFIG_MTD_ECC_SOFT not enabled" breakage/change   David Purdy
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Eric Nelson
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] [PATCH 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Eric Nelson
• [U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: add ext2 support   Eric Nelson
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Marek Vasut
• [U-Boot] [PATCH 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Marek Vasut
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Marek Vasut
• [U-Boot] [PATCH 0/4] Add preliminary cache support to i.MX6   Eric Nelson
• [U-Boot] [PATCH 1/4] i.MX6: define CACHELINE_SIZE   Eric Nelson
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH 3/4] i.MX6: implement enable_caches()   Eric Nelson
• [U-Boot] [PATCH 4/4] i.MX6: mx6qsabrelite: add cache commands if cache is enabled   Eric Nelson
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH 0/4] Add preliminary cache support to i.MX6   Eric Nelson
• [U-Boot] [PATCH 0/4] Add preliminary cache support to i.MX6   Marek Vasut
• [U-Boot] [PATCH 1/4] i.MX6: define CACHELINE_SIZE   Marek Vasut
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Wolfgang Denk
• [U-Boot] [PATCH 3/4] i.MX6: implement enable_caches()   Marek Vasut
• [U-Boot] [PATCH 4/4] i.MX6: mx6qsabrelite: add cache commands if cache is enabled   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Eric Nelson
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Fabio Estevam
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Marek Vasut
• [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs   Prafulla Wadaskar
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Dirk Behme
• [U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"   Thomas Weber
• [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs   Marek Vasut
• [U-Boot] [PATCH 1/2] PPC: Drop mv6436x_eth_initialize() from net/eth.c   Marek Vasut
• [U-Boot] [PATCH 2/2] PPC: Drop mv6446x_eth_initialize() from net/eth.c   Marek Vasut
• [U-Boot] [PATCH] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH 1/7] M28: Fix LCD PINMUX   Stefano Babic
• [U-Boot] [PATCH 2/7] M28: Support for the old M28 SoM v1.0   Stefano Babic
• [U-Boot] [PATCH 3/7] i.MX28: Reformat the DRAM memory configuration data   Stefano Babic
• [U-Boot] [PATCH 5/7] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Stefano Babic
• [U-Boot] [PATCH 6/7] Introducing 8-bit wide register, mx28_register_8   Stefano Babic
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Wolfgang Denk
• [U-Boot] [PATCH 7/7] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers   Stefano Babic
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Wolfgang Denk
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Wolfgang Denk
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Stefano Babic
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Stefano Babic
• [U-Boot] [PATCH 1/3] gplugd: use CONFIG_MACH_TYPE instead of MACH_TYPE_SHEEVAD   Stefano Babic
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Stefano Babic
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Stefano Babic
• [U-Boot] Request for help: Regarding u-boot on Pandaboard ES   jagan
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Stefano Babic
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   mailander
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Dirk Behme
• [U-Boot] [GIT Pull] u-boot-staging   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Laurence Withers
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Graeme Russ
• [U-Boot] [PATCH] [PATCH] net/eth.c: Avoid Warning when ethxaddr is not set   Gwenhael Goavec-Merou
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Wolfgang Denk
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-nds32/master   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"   Tom Rini
• [U-Boot] [PULL] U-Boot USB   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Wolfgang Denk
• [U-Boot] [GIT Pull] u-boot-staging   Wolfgang Denk
• [U-Boot] [PATCH] [PATCH] net/eth.c: Avoid Warning when ethxaddr is not set   Wolfgang Denk
• [U-Boot] [PATCH] [PATCH] net/eth.c: Avoid Warning when ethxaddr is not set   gwenhael.goavec
• [U-Boot] [PATCH] USB: Squash warning in usb_hub.c   Marek Vasut
• [U-Boot] [PATCH] [PATCH] net/eth.c: Avoid Warning when ethxaddr is not set   Wolfgang Denk
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Wolfgang Denk
• [U-Boot] [PATCH] USB: Squash warning in usb_hub.c   Wolfgang Denk
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Wolfgang Denk
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Wolfgang Denk
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH] Avoid using GNU basename   Wolfgang Denk
• [U-Boot] [PATCH] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH] [PATCH] net/eth.c: Avoid Warning when ethxaddr is not set   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"   David Purdy
• [U-Boot] Have there been any toughs of adding exFAT file system support?   Andreas Bäck
• [U-Boot] [PATCH 1/2] i.MX28: Do data transfers via DMA in MMC driver   Marek Vasut
• [U-Boot] [PATCH 2/2] i.MX28: Make MXS MMC driver cache aware   Marek Vasut
• [U-Boot] Have there been any toughs of adding exFAT file system support?   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6q_sabrelite: add SATA bindings   Wolfgang Grandegger
• [U-Boot] Have there been any toughs of adding exFAT file system support?   Wolfgang Denk
• [U-Boot] [PATCH] pci: move pciauto_config_init() to pci.h   Linus Walleij
• [U-Boot] [PATCH] OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.   Enric Balletbo i Serra
• [U-Boot] [PATCH] integrator: remove fragile delay loop from PCI code   Linus Walleij
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Simon Glass
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Linus Walleij
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Simon Glass
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Simon Glass
• [U-Boot] [PATCH] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 1/2] part_dos: align disk buffers on cache line to enable DMA and cache   Eric Nelson
• [U-Boot] fs/fat alignment   Eric Nelson
• [U-Boot] fs/fat: align disk buffers on cache line to enable DMA and cache   Eric Nelson
• [U-Boot] [PATCH] i.MX: fsl_esdhc: allow use with cache enabled.   Eric Nelson
• [U-Boot] fs/fat alignment   Mike Frysinger
• [U-Boot] [PATCH 1/2] part_dos: align disk buffers on cache line to enable DMA and cache   Mike Frysinger
• [U-Boot] fs/fat: align disk buffers on cache line to enable DMA and cache   Mike Frysinger
• [U-Boot] fs/fat alignment   Wolfgang Denk
• [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Wolfgang Denk
• [U-Boot] fs/fat alignment   Eric Nelson
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Troy Kisky
• [U-Boot] EHCI host not issuing PING token before Bulk Out transaction for CBW   Thomas Abraham
• [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions   Simon Glass
• [U-Boot] [PATCH 3/3 v2] sandbox: add getopt support   Mike Frysinger
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Igor Grinberg
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Wolfgang Denk
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Stefano Babic
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Laurence Withers
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Laurence Withers
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Igor Grinberg
• [U-Boot] CONFIG_REVISION (was i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels)   Eric Nelson
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Pali Rohár
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH] integrator: remove fragile delay loop from PCI code   Wolfgang Denk
• [U-Boot] [PATCH] pci: move pciauto_config_init() to pci.h   Wolfgang Denk
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Tom Rini
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Pali Rohár
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] [PATCH V2 0/3] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Eric Nelson
• [U-Boot] [PATCH V2 1/3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG to allow use with Freescale kernels   Eric Nelson
• [U-Boot] [PATCH V2 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Eric Nelson
• [U-Boot] [PATCH V2 3/3] i.MX6: mx6qsabrelite: add ext2 support   Eric Nelson
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Wolfgang Denk
• [U-Boot] [PATCH] Remove execute permissions from source files   Wolfgang Denk
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Marek Vasut
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Mike Frysinger
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] Bug in cfb_console driver   Pali Rohár
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Marek Vasut
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Eric Nelson
• [U-Boot] [PATCH V2 0/3] i.MX6: Add preliminary cache support   Eric Nelson
• [U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE   Eric Nelson
• [U-Boot] [PATCH V2 2/3] i.MX6: implement enable_caches()   Eric Nelson
• [U-Boot] [PATCH V2 3/3] i.MX6: mx6qsabrelite: add cache commands if cache is enabled   Eric Nelson
• [U-Boot] [PATCH/RFC] MAKEALL: allow people to specify arch/cpu/soc/vendor names   Wolfgang Denk
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
• [U-Boot] [PATCH] Block: Remove MG DISK support   Marek Vasut
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Wolfgang Denk
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Wolfgang Denk
• [U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V2] Block: Remove MG DISK support   Marek Vasut
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code   Minkyu Kang
• [U-Boot] [PATCH 1/5] sf: inline data constants   Mike Frysinger
• [U-Boot] [PATCH 2/5] sf: unify erase commands   Mike Frysinger
• [U-Boot] [PATCH 3/5] sf: eon: drop duplicate id   Mike Frysinger
• [U-Boot] [PATCH 4/5] sf: sst: inline duplicate write enable helper funcs   Mike Frysinger
• [U-Boot] [PATCH 5/5] sf: unify status register writing (and thus block unlocking)   Mike Frysinger
• [U-Boot] [PATCH] kirkwood: add support for Cloud Engines Pogoplug E02/V2   David C. Purdy
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Mike Frysinger
• [U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs   Minkyu Kang
• [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Marek Vasut
• [U-Boot] Tegra2 eldk4.2 builds   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] cam_enc_4xx build failure   Marek Vasut
• [U-Boot] ca9x4_ct_vxp build failure   Marek Vasut
• [U-Boot] highbank build failure   Marek Vasut
• [U-Boot] omap1610h2_cs_autoboot build failure   Marek Vasut
• [U-Boot] omap1610h2_cs_autoboot build failure   Marek Vasut
• [U-Boot] nhk8815 build failure   Marek Vasut
• [U-Boot] [PATCH v5] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [PATCH v6] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] U-Boot/IXP   Michael Schwingen
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Stefan Roese
• [U-Boot] cam_enc_4xx build failure   Heiko Schocher
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Stefano Babic
• [U-Boot] Bug in cfb_console driver   Anatolij Gustschin
• [U-Boot] Bug in cfb_console driver   Pali Rohár
• [U-Boot] [PATCH v3] ARM: s5p: pwm driver support   Chander M. Kashyap
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH v6] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Amit Virdi
• [U-Boot] [PULL] u-boot-pxa / fix   Albert ARIBAUD
• [U-Boot] [PATCH v7] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] [PATCH v7] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Marek Vasut
• [U-Boot] highbank build failure   Rob Herring
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   puneets
• [U-Boot] [PATCH v5] usb: align buffers at cacheline   Eric Nelson
• [U-Boot] [PATCH v5] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] cam_enc_4xx build failure   Jason Hobbs
• [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication   Mohamed Haneef
• [U-Boot] [PATCH v2 1/5] msm7x30: Add Support for low speed uart on msm7x30   Mohamed Haneef
• [U-Boot] [PATCH v2 3/5] msm7x30: Add support for msm7x30 SoC   Mohamed Haneef
• [U-Boot] [PATCH v2 4/5] Add Support for qc_mmc MMC Controller   Mohamed Haneef
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Tom Rini
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] cam_enc_4xx build failure   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] cam_enc_4xx build failure   Wolfgang Denk
• [U-Boot] [PATCH] i.MX6: imx_ccm is a constant that points to a register set   Eric Nelson
• [U-Boot] Tegra2 eldk4.2 builds   Tom Warren
• [U-Boot] [PATCH] MAKEALL: Add -m option to determine maintainers   Marek Vasut
• [U-Boot] Tegra2 eldk4.2 builds   Marek Vasut
• [U-Boot] [PATCH V2 18/18] OMAP5: reset: Use cold reset in case of 5430ES1.0   Tom Rini
• [U-Boot] [PATCH V2 00/18] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Fabio Estevam
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 0/4] USB: Add support for designware UDC   Marek Vasut
• [U-Boot] [PATCH] OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Fabio Estevam
• [U-Boot] [PATCH] cmd_pxe.c: fix strict-aliasing warnings   Jason Hobbs
• [U-Boot] [PATCH 1/4] USB:gadget:designware USB device controller (UDC) implementation   Marek Vasut
• [U-Boot] [PATCH 2/4] USB:gadget:designware Device controller bugfixes   Marek Vasut
• [U-Boot] [PATCH 3/4] USB:gadget:designware Support high speed   Marek Vasut
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Simon Glass
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Marek Vasut
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Marek Vasut
• [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Tom Rini
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Simon Glass
• [U-Boot] [PATCH V2 0/1] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH 2/4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Andy Pont
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Marek Vasut
• [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Marek Vasut
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Tom Rini
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Jonathan Solnit
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Wolfgang Denk
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Tom Rini
• [U-Boot] [PATCH] MAKEALL: Add -m option to determine maintainers   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Wolfgang Denk
• [U-Boot] U-Boot/IXP   Michael Schwingen
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -m option to determine maintainers   Marek Vasut
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Wolfgang Denk
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -m option to determine maintainers   Wolfgang Denk
• [U-Boot] [PATCH V2] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -m option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH V2] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Tom Rini
• [U-Boot] [PATCH] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -m/-M option to determine maintainers   Wolfgang Denk
• [U-Boot] [PATCHv2] OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.   Enric Balletbo i Serra
• [U-Boot] [PATCH] OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.   Enric Balletbò i Serra
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH] sc520: fix build warning about unused temp var   Mike Frysinger
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] U-Boot/IXP   Bryan Hundven
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Pali Rohár
• [U-Boot] "CONFIG_MTD_ECC_SOFT not enabled" breakage/change   Scott Wood
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] U-Boot/IXP   Bryan Hundven
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Tom Rini
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] U-Boot/IXP   Bryan Hundven
• [U-Boot] [PATCH] sc520: fix build warning about unused temp var   Graeme Russ
• [U-Boot] i2c support for u-boot   Yannick Niane
• [U-Boot] U-Boot/IXP   Michael Schwingen
• [U-Boot] U-Boot/IXP   Marek Vasut
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] MAKEALL: Add -m/-M option to determine maintainers   Mike Frysinger
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Mike Frysinger
• [U-Boot] [PATCH] sc520: fix build warning about unused temp var   Mike Frysinger
• [U-Boot] [PATCH] sc520: fix build warning about unused temp var   Graeme Russ
• [U-Boot] nds32 ptrace register overflow   Mike Frysinger
• [U-Boot] [PATCH 1/3] mtd/NAND: Add FSMC driver support   Scott Wood
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Mike Frysinger
• [U-Boot] [PATCH] net: smc91111: use mdelay()   Mike Frysinger
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Mike Frysinger
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Marek Vasut
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Mike Frysinger
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Marek Vasut
• [U-Boot] [PATCH 1/6] Examples: Properly append LDFLAGS to LD command   Marek Vasut
• [U-Boot] [PATCH 2/6] IXP: Make IXP buildable with arm-linux- toolchains   Marek Vasut
• [U-Boot] [PATCH 3/6] IXP: Fix missing MACH_TYPE_{ACTUX?, PNB3, DVLHOST}   Marek Vasut
• [U-Boot] [PATCH 4/6] IXP: Squash warnings in IXP NPE   Marek Vasut
• [U-Boot] [PATCH 5/6] IXP: Move PDNB3 and SCPU from Makefile to boards.cfg   Marek Vasut
• [U-Boot] [PATCH 6/6] IXP: Fix NAND build warning on PDNB3 and SCPU   Marek Vasut
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Marek Vasut
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Marek Vasut
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Marek Vasut
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Graeme Russ
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Bryan Hundven
• [U-Boot] [PATCH] git-mailrc: change usb maintainer to Marek   Marek Vasut
• [U-Boot] [PATCH 6/6] IXP: Fix NAND build warning on PDNB3 and SCPU   Scott Wood
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 6/6] IXP: Fix NAND build warning on PDNB3 and SCPU   Marek Vasut
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH V4] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH v2] git-mailrc: change usb maintainer to Marek   Mike Frysinger
• [U-Boot] [PATCH 1/1] arm: vexpress: Fixed get_ticks/get_tbclk build failures   matt.waddel at linaro.org
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Mike Frysinger
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Graeme Russ
• [U-Boot] nds32 ptrace register overflow   Macpaul Lin
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Mike Frysinger
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Graeme Russ
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Mike Frysinger
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Mike Frysinger
• [U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2   Bud Miljkovic
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Mike Frysinger
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Amit Virdi
• [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.   Mike Frysinger
• [U-Boot] [PATCH v5 1/9] Remove CMD_PXE's static on run_command()   Mike Frysinger
• [U-Boot] [PATCH 1/4] USB:gadget:designware USB device controller (UDC) implementation   Amit Virdi
• [U-Boot] [PATCH 2/4] USB:gadget:designware Device controller bugfixes   Amit Virdi
• [U-Boot] [PATCH v5 2/9] Rename run_command() to builtin_run_command()   Mike Frysinger
• [U-Boot] [PATCH v5 3/9] Rename run_command2() to run_command()   Mike Frysinger
• [U-Boot] [PATCH v5 4/9] Stop using builtin_run_command()   Mike Frysinger
• [U-Boot] [PATCH v5 5/9] Don't include standard parser if hush is used   Mike Frysinger
• [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution   Mike Frysinger
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Mike Frysinger
• [U-Boot] [PATCH v3 08/28] Introduce generic global_data   Mike Frysinger
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Mike Frysinger
• [U-Boot] [PATCH v4 01/13] Define CONFIG_SYS_SKIP_RELOC for all archs   Mike Frysinger
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Mike Frysinger
• [U-Boot] [PATCH] sh_spi: Add 4 chip select signals supporting   Shimoda, Yoshihiro
• [U-Boot] [PATCH 3/4] USB:gadget:designware Support high speed   Amit Virdi
• [U-Boot] [PATCH v5 5/9] Don't include standard parser if hush is used   Simon Glass
• [U-Boot] [PATCH] sh: sh7757lcr: add supporting for MMCIF   Shimoda, Yoshihiro
• [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution   Simon Glass
• [U-Boot] [PATCH V2 00/18] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon   Sricharan R
• [U-Boot] [PATCH v3 08/28] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH v4 01/13] Define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Simon Glass
• [U-Boot] [PATCH v3 08/28] Introduce generic global_data   Simon Glass
• [U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2   Dirk Behme
• [U-Boot] [RESEND 0/4] onenand: OneNAND board dependent probe and fixes for Samsung targets   Lukasz Majewski
• [U-Boot] [RESEND 1/4] onenand:samsung Target dependent OneNAND chip probe function   Lukasz Majewski
• [U-Boot] [RESEND 2/4] onenand:samsung OneNAND chip probe functions added for GONI and Exynos4210   Lukasz Majewski
• [U-Boot] [RESEND 3/4] onenand: Replace ONENAND_IS_MLC() test with ONENAND_HAS_4KB()   Lukasz Majewski
• [U-Boot] [RESEND 4/4] onenand: samsung: Enable support OneNAND support at Samsung's Exynos4210   Lukasz Majewski
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 1/3] ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Michael Schwingen
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Marek Vasut
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Lei Wen
• [U-Boot] Bug in cfb_console driver   Anatolij Gustschin
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Amit Virdi
• [U-Boot] md,mw commands   VISWANADHULA BALAJI
• [U-Boot] [PATCH 1/8 v3] powerpc/srio: Rewrite the struct ccsr_rio   Liu Gang
• [U-Boot] [PATCH 2/8 v3] powerpc/corenet_ds: Correct the compilation errors about ENV   Liu Gang
• [U-Boot] [PATCH 3/8 v3] powerpc/corenet_ds: Document for the boot from SRIO   Liu Gang
• [U-Boot] [PATCH 4/8 v3] powerpc/corenet_ds: Master module for boot from SRIO   Liu Gang
• [U-Boot] [PATCH 5/8 v3] powerpc/corenet_ds: Slave module for boot from SRIO   Liu Gang
• [U-Boot] [PATCH 6/8 v3] powerpc/corenet_ds: Slave uploads ucode when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 7/8 v3] powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 8/8 v3] powerpc/corenet_ds: Slave core in holdoff when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Marek Vasut
• [U-Boot] [Buildroot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Pull request: u-boot-x86/master   Graeme Russ
• [U-Boot] [PATCH] sc520: fix build warning about unused temp var   Graeme Russ
• [U-Boot] [PATCH 0/6] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Michael Schwingen
• [U-Boot] [PATCH 0/7 V2] IXP: Make IXP compile with arm-linux-gnueabi- and fix it   Marek Vasut
• [U-Boot] [PATCH 1/7 RESEND] Examples: Properly append LDFLAGS to LD command   Marek Vasut
• [U-Boot] [PATCH 2/7 RESEND] IXP: Make IXP buildable with arm-linux- toolchains   Marek Vasut
• [U-Boot] [PATCH 3/7 RESEND] IXP: Fix missing MACH_TYPE_{ACTUX?, PNB3, DVLHOST}   Marek Vasut
• [U-Boot] [PATCH 4/7 RESEND] IXP: Squash warnings in IXP NPE   Marek Vasut
• [U-Boot] [PATCH 5/7 RESEND] IXP: Move PDNB3 and SCPU from Makefile to boards.cfg   Marek Vasut
• [U-Boot] [PATCH 6/7 V2] IXP: Fix NAND build warning on PDNB3 and SCPU   Marek Vasut
• [U-Boot] [PATCH 7/7] IXP: Fix GPIO_INT_ACT_LOW_SET()   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa/master   Marek Vasut
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH] i.MX6: imx_ccm is a constant that points to a register set   Stefano Babic
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Hans-Christian Egtvedt
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Marek Vasut
• [U-Boot] Building imximage for mx53ard board, supporting NAND and YAFFS2   Fabio Estevam
• [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting   Rob Herring
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] i.MX6: imx_ccm is a constant that points to a register set   Eric Nelson
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Wolfgang Denk
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Wolfgang Denk
• [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger   Wolfgang Denk
• [U-Boot] [PATCH] cfi: fix the incomplete erased status check in buffer write   Stefan Roese
• [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support   Wolfgang Denk
• [U-Boot] md,mw commands   albert.u.boot at aribaud.net
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Tom Rini
• [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Wolfgang Denk
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Mike Frysinger
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Mike Frysinger
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] [PATCH] usb: replace wait_ms() with mdelay()   Mike Frysinger
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Mike Frysinger
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Mike Frysinger
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Mike Frysinger
• [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution   Mike Frysinger
• [U-Boot] [PATCH v4] usb: align buffers at cacheline   Mike Frysinger
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.   Doug Anderson
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] OneNAND custodian (was: Re: [RESEND 0/4] onenand: OneNAND board dependent probe and fixes for Samsung targets)   Scott Wood
• [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.   Wolfgang Denk
• [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting   Wolfgang Denk
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH v5 0/9] Unified command execution in one place   Wolfgang Denk
• [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting   Rob Herring
• [U-Boot] [PATCH v5 0/9] Unified command execution in one place   Simon Glass
• [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.   Mike Frysinger
• [U-Boot] [PATCH v5 1/9] Remove CMD_PXE's static on run_command()   Wolfgang Denk
• [U-Boot] [PATCH v5 2/9] Rename run_command() to builtin_run_command()   Wolfgang Denk
• [U-Boot] [PATCH v5 3/9] Rename run_command2() to run_command()   Wolfgang Denk
• [U-Boot] [PATCH v5 4/9] Stop using builtin_run_command()   Wolfgang Denk
• [U-Boot] [PATCH v5 5/9] Don't include standard parser if hush is used   Wolfgang Denk
• [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution   Wolfgang Denk
• [U-Boot] [PATCH v5 7/9] Remove interleave of non-U-Boot code in hush   Wolfgang Denk
• [U-Boot] [PATCH v5 8/9] Add cmd_process() to process commands in one place   Wolfgang Denk
• [U-Boot] [PATCH v5 9/9] Convert cmd_usage() calls in common to use a return value   Wolfgang Denk
• [U-Boot] [PATCH 1/2] PPC: Drop mv6436x_eth_initialize() from net/eth.c   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PPC: Drop mv6446x_eth_initialize() from net/eth.c   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-x86/master   Wolfgang Denk
• [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting   Wolfgang Denk
• [U-Boot] [PATCH v5 0/9] Unified command execution in one place   Wolfgang Denk
• [U-Boot] [PATCH v2] main: unify command parsing functions   Wolfgang Denk
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Mikhail Kshevetskiy
• [U-Boot] [PATCH 2/3] ns16550 has a different register layout on SOC_DA8XX   Mikhail Kshevetskiy
• [U-Boot] [PATCH 3/3] arm/davinci/da850: add uart0 pinmux   Mikhail Kshevetskiy
• [U-Boot] [PATCH] Makefile: Remove mmc_spl related enteries   Wolfgang Denk
• [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Wolfgang Denk
• [U-Boot] [PATCH] tools: checkstack.pl from Linux added to tools   Wolfgang Denk
• [U-Boot] [PATCH] cmd_cache: use cache/invalidate functions available in common.h   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] image: Support FDTs already loaded at their load address   Wolfgang Denk
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Fabio Estevam
• [U-Boot] [PATCH V2] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] (no subject)   Mike Frysinger
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Laurence Withers
• [U-Boot] [PATCH v2] main: unify command parsing functions   Michael Walle
• [U-Boot] [PATCH 1/8 v3] powerpc/srio: Rewrite the struct ccsr_rio   Andy Fleming
• [U-Boot] [PATCH v2] main: unify command parsing functions   Simon Glass
• [U-Boot] [RFC PATCH 0/5] add bootable partition support   Rob Herring
• [U-Boot] [RFC PATCH 1/5] disk/part: check bootable flag for DOS partitions   Rob Herring
• [U-Boot] [RFC PATCH 2/5] disk/part: introduce get_device_and_partition   Rob Herring
• [U-Boot] [RFC PATCH 3/5] cmd_ext2: use common get_device_and_partition function   Rob Herring
• [U-Boot] [RFC PATCH 4/5] cmd_fat: use common get_device_and_partition function   Rob Herring
• [U-Boot] [RFC PATCH 5/5] cmd_scsi: use common get_device_and_partition function   Rob Herring
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Mikhail Kshevetskiy
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Mikhail Kshevetskiy
• [U-Boot] OneNAND custodian (was: Re: [RESEND 0/4] onenand: OneNAND board dependent probe and fixes for Samsung targets)   Kyungmin Park
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Lei Wen
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v4] net: allow setting env enetaddr from net device setting   Rob Herring
• [U-Boot] [PATCH v8 15/21] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v8 21/21] tegra: fdt: Enable FDT support for Ventana   Simon Glass
• [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding   Simon Glass
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH v2 2/2] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v5 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v5 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v5 5/9] tegra: i2c: Add I2C driver   Heiko Schocher
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Simon Glass
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Graeme Russ
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Wolfgang Denk
• [U-Boot] [PATCH V3] OMAP5: reset: Use cold reset in case of 5430ES1.0   R Sricharan
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Amit Virdi
• [U-Boot] cam_enc_4xx build failure   Heiko Schocher
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Amit Virdi
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Problem in loading kernel image by u-boot..   Manish
• [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] CONFIG_REVISION (was i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels)   Stefano Babic
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] OneNAND custodian (was: Re: [RESEND 0/4] onenand: OneNAND board dependent probe and fixes for Samsung targets)   Lukasz Majewski
• [U-Boot] [PATCH] cmd_pxe.c: fix strict-aliasing warnings   Heiko Schocher
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: add ext2 support   Stefano Babic
• [U-Boot] i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels   Albert ARIBAUD
• [U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC   Amit Virdi
• [U-Boot] [PATCH V2 1/5] USB:gadget:designware USB device controller (UDC) implementation   Amit Virdi
• [U-Boot] [PATCH V2 2/5] USB:gadget:designware Device controller bugfixes   Amit Virdi
• [U-Boot] [PATCH V2 3/5] USB:gadget:designware Support high speed   Amit Virdi
• [U-Boot] [PATCH V2 4/5] USB:gadget:designware Make locally used functions static   Amit Virdi
• [U-Boot] [PATCH V2 5/5] USB:gadget:designware Fix memory nonalignment issue   Amit Virdi
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Amit Virdi
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Stefan Roese
• [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller   Amit Virdi
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Amit Virdi
• [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH 3/5] flea3: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH 4/5] imx31_litekit: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH 5/5] imx31_phycore: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH 1/5] mx31ads: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Stefano Babic
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Helmut Raiger
• [U-Boot] [PATCH] i.MX6: imx_ccm is a constant that points to a register set   Stefano Babic
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Stefano Babic
• [U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC   Lukasz Majewski
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller   Stefan Roese
• [U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC   Stefan Roese
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Wolfgang Denk
• [U-Boot] [PATCH v2] main: unify command parsing functions   Wolfgang Denk
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Marek Vasut
• [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller   Amit Virdi
• [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller   Stefan Roese
• [U-Boot] [PATCH v2] main: unify command parsing functions   Wolfgang Denk
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Wolfgang Denk
• [U-Boot] [PATCH] USB:gadget:designware USB OTG implementation   Amit Virdi
• [U-Boot] [PATCH] st_smi: Change timeout loop implementation   Amit Virdi
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Wolfgang Denk
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Amit Virdi
• [U-Boot] [PATCH 01/25] SPEAr: Fix ARM relocation support   Amit Virdi
• [U-Boot] [PATCH 02/25] SPEAr: Eliminate dependency on Xloader table   Amit Virdi
• [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Amit Virdi
• [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs   Amit Virdi
• [U-Boot] [PATCH 05/25] SPEAr: Add macb driver support for spear310 and spear320   Amit Virdi
• [U-Boot] [PATCH 06/25] SPEAr: Add interface information in initialization   Amit Virdi
• [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs   Amit Virdi
• [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards   Amit Virdi
• [U-Boot] [PATCH 09/25] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)   Amit Virdi
• [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables   Amit Virdi
• [U-Boot] [PATCH 11/25] SPEAr: Initialize SNOR in early_board_init_f   Amit Virdi
• [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support   Amit Virdi
• [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device   Amit Virdi
• [U-Boot] [PATCH 14/25] SPEAr: Enable udc and usb-console support only for usbtty configuration   Amit Virdi
• [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet   Amit Virdi
• [U-Boot] [PATCH 16/25] SPEAr: Enable dcache for fast file transfer   Amit Virdi
• [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION   Amit Virdi
• [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Amit Virdi
• [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro   Amit Virdi
• [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb   Amit Virdi
• [U-Boot] [PATCH 21/25] SPEAr: explicitly select clk src for UART   Amit Virdi
• [U-Boot] [PATCH 22/25] SPEAr: Correct SoC ID offset in misc configuration space   Amit Virdi
• [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files   Amit Virdi
• [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis   Amit Virdi
• [U-Boot] [PATCH 25/25] cleanup/SPEAr: Define configuration flags more elegantly   Amit Virdi
• [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger   Wolfgang Denk
• [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support   Wolfgang Denk
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Amit Virdi
• [U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC   Marek Vasut
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Wolfgang Denk
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Wolfgang Denk
• [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest   Wolfgang Denk
• [U-Boot] [PATCH 3/5] flea3: Provide proper range for memtest   Wolfgang Denk
• [U-Boot] [PATCH] USB:gadget:designware USB OTG implementation   Marek Vasut
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Helmut Raiger
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Stefano Babic
• [U-Boot] [PATCH 1/8 v3] powerpc/srio: Rewrite the struct ccsr_rio   Liu Gang
• [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH 01/25] SPEAr: Fix ARM relocation support   Stefan Roese
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Stefan Roese
• [U-Boot] [PATCH 02/25] SPEAr: Eliminate dependency on Xloader table   Stefan Roese
• [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Stefan Roese
• [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs   Stefan Roese
• [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Mike Frysinger
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Lei Wen
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs   Stefan Roese
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards   Stefan Roese
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Amit Virdi
• [U-Boot] [PATCH 09/25] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)   Stefan Roese
• [U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC   Amit Virdi
• [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables   Stefan Roese
• [U-Boot] [PATCH 11/25] SPEAr: Initialize SNOR in early_board_init_f   Stefan Roese
• [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support   Stefan Roese
• [U-Boot] [PATCH] ARM: davinci: fixes for cam_enc_4xx board   Heiko Schocher
• [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device   Stefan Roese
• [U-Boot] [PATCH 14/25] SPEAr: Enable udc and usb-console support only for usbtty configuration   Stefan Roese
• [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet   Stefan Roese
• [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION   Stefan Roese
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Wolfgang Denk
• [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Stefan Roese
• [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro   Stefan Roese
• [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb   Stefan Roese
• [U-Boot] [PATCH 21/25] SPEAr: explicitly select clk src for UART   Stefan Roese
• [U-Boot] [PATCH 22/25] SPEAr: Correct SoC ID offset in misc configuration space   Stefan Roese
• [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files   Stefan Roese
• [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis   Stefan Roese
• [U-Boot] [PATCH 25/25] cleanup/SPEAr: Define configuration flags more elegantly   Stefan Roese
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis   Stefan Roese
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Tom Rini
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Stefan Roese
• [U-Boot] CONFIG_REVISION (was i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels)   Eric Nelson
• [U-Boot] [PATCH] i.MX6: imx_ccm is a constant that points to a register set   Eric Nelson
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Joe Hershberger
• [U-Boot] CONFIG_REVISION (was i.MX6: mx6qsabrelite: allow use with Freescale 2.6.38 kernels)   Stefano Babic
• [U-Boot] legacy images with DTB only / DTB integrity   Michael Walle
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   Tom Rini
• [U-Boot] [PATCH v8 15/21] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v8 21/21] tegra: fdt: Enable FDT support for Ventana   Stephen Warren
• [U-Boot] [PATCH v8 21/21] tegra: fdt: Enable FDT support for Ventana   Simon Glass
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Simon Glass
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Peter Barada
• [U-Boot] [PATCH v8 21/21] tegra: fdt: Enable FDT support for Ventana   Tom Warren
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   Menon, Nishanth
• [U-Boot] [PATCH V3] OMAP5: reset: Use cold reset in case of 5430ES1.0   Menon, Nishanth
• [U-Boot] [PATCH V3] OMAP5: reset: Use cold reset in case of 5430ES1.0   Tom Rini
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Mikhail Kshevetskiy
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Tom Rini
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Tom Rini
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Peter Barada
• [U-Boot] OneNAND custodian   Scott Wood
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   Tom Rini
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Stephen Warren
• [U-Boot] [PATCH v5 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Stephen Warren
• [U-Boot] [PATCH v5 5/9] tegra: i2c: Add I2C driver   Stephen Warren
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Wolfgang Denk
• [U-Boot] TQM85xx boards failing on older gcc   Andy Fleming
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Wolfgang Denk
• [U-Boot] OneNAND custodian   Wolfgang Denk
• [U-Boot] RFC - how to support multipl DRAM chips in a single SPL build?   Tom Rini
• [U-Boot] [PATCH] sh: r0p7734: Add support I2C controller   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] sh: r0p7734: Add support I2C controller   Nobuhiro Iwamatsu
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] Please pull u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Christian Riesch
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   Menon, Nishanth
• [U-Boot] [PATCH V2 05/18] OMAP5: palmas: Configure nominal opp vdd values   Sricharan R
• [U-Boot] [PATCH V3] OMAP5: reset: Use cold reset in case of 5430ES1.0   Sricharan R
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Lei Wen
• [U-Boot] [PATCH 3/3 v2] sandbox: add getopt support   Simon Glass
• [U-Boot] [PATCH v2] main: unify command parsing functions   Simon Glass
• [U-Boot] [PATCH v5 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v5 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] (no subject)   Simon Glass
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [WIP, PATCH] initcall: An outline of the idea   Simon Glass
• [U-Boot] TQM85xx boards failing on older gcc   Stefan Roese
• [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Simon Glass
• [U-Boot] [PULL] u-boot-pxa/master   Albert ARIBAUD
• [U-Boot] Any outstanding ARM pull requests?   Albert ARIBAUD
• [U-Boot] Any outstanding ARM pull requests?   Stefano Babic
• [U-Boot] [PATCH 1/3] spl: add ymodem support   Stefano Babic
• [U-Boot] [PATCH] mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] Any outstanding ARM pull requests?   Minkyu Kang
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Wolfgang Denk
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Lei Wen
• [U-Boot] TQM85xx boards failing on older gcc   Wolfgang Denk
• [U-Boot] [PATCH] lib: zlib: update to 1.2.6   Wolfgang Denk
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Stefan Roese
• [U-Boot] [PATCH] EXYNOS: Add structure for Exynos4 DMC   Minkyu Kang
• [U-Boot] please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [PATCH 1/8 v4] powerpc/srio: Rewrite the struct ccsr_rio   Liu Gang
• [U-Boot] [PATCH 2/8 v4] powerpc/corenet_ds: Correct the compilation errors about ENV   Liu Gang
• [U-Boot] [PATCH 3/8 v4] powerpc/corenet_ds: Document for the boot from SRIO   Liu Gang
• [U-Boot] [PATCH 4/8 v4] powerpc/corenet_ds: Master module for boot from SRIO   Liu Gang
• [U-Boot] [PATCH 5/8 v4] powerpc/corenet_ds: Slave module for boot from SRIO   Liu Gang
• [U-Boot] [PATCH 6/8 v4] powerpc/corenet_ds: Slave uploads ucode when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 7/8 v4] powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 8/8 v4] powerpc/corenet_ds: Slave core in holdoff when boot from SRIO   Liu Gang
• [U-Boot] [STATUS] New custodians, release status   Wolfgang Denk
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Wolfgang Denk
• [U-Boot] Building uboot image for panda board   charlesKAO
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] DEVELOPER's MEETING   Wolfgang Denk
• [U-Boot] Building uboot image for panda board   Aneesh V
• [U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled   Dirk Behme
• [U-Boot] [PATCH] mmc: fsl_esdhc: Add workaround for auto-clock gate errata ENGcm03648   Dirk Behme
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Marek Vasut
• [U-Boot] [PATCH] PXA: Enable CONFIG_PREBOOT on zipitz2   Marek Vasut
• [U-Boot] [PATCH] PXA: Enable CONFIG_PREBOOT on zipitz2   Marek Vasut
• [U-Boot] Any outstanding ARM pull requests?   Tom Warren
• [U-Boot] Any outstanding ARM pull requests?   Rob Herring
• [U-Boot] TQM85xx boards failing on older gcc   Andy Fleming
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] Enabling nand createbbt command   Scott Wood
• [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions   Aneesh V
• [U-Boot] [PATCH 3/6] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Aneesh V
• [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] [PATCH v4 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v4 2/6] armv7: add appropriate headers for assembly functions   Aneesh V
• [U-Boot] [PATCH v4 3/6] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH v4 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Aneesh V
• [U-Boot] [PATCH v4 6/6] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Wolfgang Denk
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] Enabling nand createbbt command   Scott Wood
• [U-Boot] pull request: u-boot-tegra/master   Tom Warren
• [U-Boot] Any outstanding ARM pull requests?   Albert ARIBAUD
• [U-Boot] Enabling nand createbbt command   Scott Wood
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] Enabling nand createbbt command   Fabio Estevam
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] [PATCH] Makefile: fdt: Make the final build result be u-boot.bin   Stephen Warren
• [U-Boot] Enabling nand createbbt command   Fabio Estevam
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] Enabling nand createbbt command   Scott Wood
• [U-Boot] Enabling nand createbbt command   Fabio Estevam
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] [PATCH 1/2] tegra: Implement pre-console putc() for fdt warning   Simon Glass
• [U-Boot] [PATCH 2/2] tegra: Enable pre-console putc() for Tegra boards   Simon Glass
• [U-Boot] [PATCH] Makefile: fdt: Make the final build result be u-boot.bin   Simon Glass
• [U-Boot] [PATCH 1/2] tegra: Implement pre-console putc() for fdt warning   Mike Frysinger
• [U-Boot] (no subject)   Mike Frysinger
• [U-Boot] (no subject)   Mike Frysinger
• [U-Boot] [PATCH] USB:gadget:designware USB OTG implementation   Pratyush Anand
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 1/1] arm: vexpress: Fixed get_ticks/get_tbclk build failures   walimis
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Vipin Kumar
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Stefan Roese
• [U-Boot] [PATCH] PowerPC: enable the SATA for p1/p2 rdb-pc platform   Chang-Ming.Huang at freescale.com
• [U-Boot] AVR32 status   Andreas Bießmann
• [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx   Vipin Kumar
• [U-Boot] [PATCH 2/2] tegra: Enable pre-console putc() for Tegra boards   Olof Johansson
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] PowerPC: enable the SATA for p1/p2 rdb-pc platform   Tabi Timur-B04825
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Stefano Babic
• [U-Boot] AVR32 status   Wolfgang Denk
• [U-Boot] adding new command in u-boot   Haneef hawk21
• [U-Boot] (no subject)   Simon Glass
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Wolfgang Denk
• [U-Boot] A few things for the release?   Simon Glass
• [U-Boot] adding new command in u-boot   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] omap3: fix NAND for mcx board   Stefano Babic
• [U-Boot] [PATCH 2/2] omap3: fix NAND for tam3517 boards   Stefano Babic
• [U-Boot] [PATCH 1/2] omap3: fix NAND for mcx board   Tom Rini
• [U-Boot] [PATCH 1/2] omap3: fix NAND for mcx board   Stefano Babic
• [U-Boot] [PATCH 2/2] tegra: Enable pre-console putc() for Tegra boards   Stephen Warren
• [U-Boot] A few things for the release?   Dirk Behme
• [U-Boot] ubifsmount reports "Error reading superblock", but linux can mount FS   Alex Zeffertt
• [U-Boot] [PATCH 2/2] tegra: Enable pre-console putc() for Tegra boards   Simon Glass
• [U-Boot] [PATCH 2/2] tegra: Enable pre-console putc() for Tegra boards   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Simon Glass
• [U-Boot] [PATCH v2 2/4] Enable printf() console if pre-console putc() is available   Simon Glass
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Simon Glass
• [U-Boot] [PATCH v2 4/4] tegra: Enable pre-console putc() for Tegra boards   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Tom Warren
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Stephen Warren
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Tom Warren
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Stephen Warren
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] DEVELOPER's MEETING   Fabio Estevam
• [U-Boot] [PATCH resend] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   Matt Waddel
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Wolfgang Denk
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Wolfgang Denk
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Wolfgang Denk
• [U-Boot] pull request for u-boot-tegra/master   Wolfgang Denk
• [U-Boot] DEVELOPER's MEETING   Wolfgang Denk
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Sughosh Ganu
• [U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash?   Balaji Sivakumar
• [U-Boot] Error while Readin Flash Info(flinfo) in U-boot - Help   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] [PATCH 1/2] ATMEL: use generic mmc framework   Andreas Bießmann
• [U-Boot] [PATCH v3] ATMEL: use generic mmc framework   Andreas Bießmann
• [U-Boot] [PATCH] doc/git-mailrc: add <me> to avr32 alias   Andreas Bießmann
• [U-Boot] DEVELOPER's MEETING   Graeme Russ
• [U-Boot] Bug in cfb_console driver   Pali Rohár
• [U-Boot] AVR32 status   Andreas Bießmann
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash?   Dirk Behme
• [U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash?   Wolfgang Denk
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Simon Glass
• [U-Boot] pull request for u-boot-tegra/master   Simon Glass
• [U-Boot] AVR32 status   Wolfgang Denk
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Wolfgang Denk
• [U-Boot] confusion about running raw binary files   apple pie
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Wolfgang Denk
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Simon Glass
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Wolfgang Denk
• [U-Boot] [PATCH v2 3/4] tegra: Implement pre-console putc() for fdt warning   Simon Glass
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Simon Glass
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Mike Frysinger
• [U-Boot] [PATCH v4 1/6] arm: adapt asm/linkage.h from Linux   Mike Frysinger
• [U-Boot] [PATCH v4 2/6] armv7: add appropriate headers for assembly functions   Mike Frysinger
• [U-Boot] [PATCH v4 3/6] ARM: enable Thumb build   Mike Frysinger
• [U-Boot] [PATCH v2 1/4] ns16550: Add function to drain serial output   Mike Frysinger
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Mike Frysinger
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Dirk Behme
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Mike Frysinger
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Wolfgang Denk
• [U-Boot] [PATCH 1/2] nds32: fix ptrace and interrupt register overflow   Macpaul Lin
• [U-Boot] [PATCH 2/2] nds32/n1213: correct vector table in start.S   Macpaul Lin
• [U-Boot] [PATCH v2 1/2] nds32: fix ptrace and interrupt register overflow   Macpaul Lin
• [U-Boot] [PATCH v2 2/2] nds32/n1213: correct vector table in start.S   Macpaul Lin
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] "make env" now requires a configured tree   Loïc Minier
• [U-Boot] [PATCH] Strip fw_printenv like the other tools   Loïc Minier
• [U-Boot] Enabling nand createbbt command   Charles Manning
• [U-Boot] [PATCH] Strip fw_printenv like the other tools   Mike Frysinger
• [U-Boot] "make env" now requires a configured tree   Mike Frysinger
• [U-Boot] [PATCHi v2] PowerPC: correct the SATA for p1/p2 rdb-pc platform   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH v4 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v4 3/6] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH] kirkwood: add support for Cloud Engines Pogoplug E02/V2   Prafulla Wadaskar
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] Does U-boot supports Spansion S29GL01GS NOR Flash?   Wolfgang Denk
• [U-Boot] [PATCH V3 00/19] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon   R Sricharan
• [U-Boot] [PATCH V3 01/19] OMAP5: clocks: Change clock settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH V3 02/19] OMAP5: board: Add pinmux data for omap5_evm board.   R Sricharan
• [U-Boot] [PATCH V3 03/19] OMAP5: io: Configure the io settings for omap5430 sevm board.   R Sricharan
• [U-Boot] [PATCH V3 04/19] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH V3 05/19] OMAP5: palmas: Configure nominal opp vdd values   R Sricharan
• [U-Boot] [PATCH V3 06/19] OMAP5: hwinit: Add the missing break statement   R Sricharan
• [U-Boot] [PATCH V3 07/19] OMAP4/5: Make the silicon revision variable common.   R Sricharan
• [U-Boot] [PATCH V3 08/19] OMAP5: SRAM: Change the SRAM base address.   R Sricharan
• [U-Boot] [PATCH V3 09/19] OMAP4/5: Make the sysctrl structure common   R Sricharan
• [U-Boot] [PATCH V3 10/19] OMAP4/5: device: Add support to get the device type.   R Sricharan
• [U-Boot] [PATCH V3 11/19] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   R Sricharan
• [U-Boot] [PATCH V3 12/19] OMAP5: ddr: Change the ddr device name.   R Sricharan
• [U-Boot] [PATCH V3 13/19] OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.   R Sricharan
• [U-Boot] [PATCH V3 14/19] arm: omap5: correct boot device mode7 for eMMC   R Sricharan
• [U-Boot] [PATCH V3 15/19] power: twl6035: add palmas PMIC support   R Sricharan
• [U-Boot] [PATCH V3 16/19] omap5: pbias ldo9 turn on   R Sricharan
• [U-Boot] [PATCH V3 17/19] mmc: omap5evm: Add eMMC saveenv support   R Sricharan
• [U-Boot] [PATCH V3 18/19] OMAP2+: reset: Create a common reset layer.   R Sricharan
• [U-Boot] [PATCH V3 19/19] OMAP5: reset: Use cold reset in case of 5430ES1.0   R Sricharan
• [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs   Amit Virdi
• [U-Boot] [PATCH V3 18/19] OMAP2+: reset: Create a common reset layer.   R, Sricharan
• [U-Boot] [PATCH V3 18/19] OMAP3+: reset: Create a common reset layer.   R Sricharan
• [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables   Amit Virdi
• [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support   Amit Virdi
• [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device   Amit Virdi
• [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis   Amit Virdi
• [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files   Amit Virdi
• [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Wolfgang Denk
• [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files   Stefan Roese
• [U-Boot] Pull request u-boot-blackfin.git (sandbox branch)   Mike Frysinger
• [U-Boot] [PATCH 0/3 v3] sandbox: spi/sf emulation   Mike Frysinger
• [U-Boot] [PATCH 1/3 v3] sandbox: SPI emulation bus   Mike Frysinger
• [U-Boot] [PATCH 2/3 v3] sandbox: new SPI flash driver   Mike Frysinger
• [U-Boot] [PATCH 3/3 v3] sandbox: enable new spi/sf layers   Mike Frysinger
• [U-Boot] [PATCH V3 18/19] OMAP3+: reset: Create a common reset layer.   Tom Rini
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master   Simon Glass
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] undefine reference to `__bss_end__' error   Will Khan
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] undefine reference to `__bss_end__' error   Simon Glass
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Graeme Russ
• [U-Boot] [PATCH V2 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Eric Nelson
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE   Eric Nelson
• [U-Boot] [PATCH V2 2/3] i.MX6: implement enable_caches()   Eric Nelson
• [U-Boot] [PATCH V2 3/3] i.MX6: mx6qsabrelite: add cache commands if cache is enabled   Eric Nelson
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Eric Nelson
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Mike Frysinger
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Graeme Russ
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] A few things for the release?   Simon Glass
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Graeme Russ
• [U-Boot] [PATCH V3 18/19] OMAP3+: reset: Create a common reset layer.   R, Sricharan
• [U-Boot] [PATCH V4 18/19] OMAP2+: reset: Create a common reset layer.   R Sricharan
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH] sh: sh7757lcr: add supporting for MMCIF   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement   Lukasz Majewski
• [U-Boot] [PATCH] mmc:fix: Set mmc width according to MMC host capabilities   Lukasz Majewski
• [U-Boot] [PATCH] usb:udc:samsung:fix Remove the req_config flag   Lukasz Majewski
• [U-Boot] U-boot for MPC8280 Processor   srujan varma
• [U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE   Stefano Babic
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH 1/2] cmd_fat: add FAT write command   Maximilian Schwerin
• [U-Boot] [PATCH 2/2] Add support for loading and saving the environment to a FAT partition   Maximilian Schwerin
• [U-Boot] reminder for [PATCH 0/5] Support for qualcomm msm7630 board   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH] atmel_mci.h: remove outdated register macros   Andreas Bießmann
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Eric Nelson
• [U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE   Eric Nelson
• [U-Boot] [PATCH 1/8 v4] powerpc/srio: Rewrite the struct ccsr_rio   Liu Gang-B34182
• [U-Boot] [PATCH v3] ATMEL: use generic mmc framework   Andreas Bießmann
• [U-Boot] [PATCH] atmel_mci.h: remove outdated register macros   Andreas Bießmann
• [U-Boot] [PATCH 2/2] ATMEL: remove old atmel_mci driver   Andreas Bießmann
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH] mx6: Read register revision from register   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Dirk Behme
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Mike Frysinger
• [U-Boot] [PATCH] atmel-boards: add missing atmel_mci.h   Andreas Bießmann
• [U-Boot] pull request for u-boot-avr32   Andreas Bießmann
• [U-Boot] [PATCH] mx6: Read register revision from register   Liu Hui-R64343
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Eric Nelson
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6: Remove duplicate definition of ANATOP_BASE_ADDR   Fabio Estevam
• [U-Boot] [PATCH] mx6: Read register revision from register   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Read silicon revision from register   Eric Nelson
• [U-Boot] SPI flash writing   Gerlando Falauto
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] SPI flash writing   Mike Frysinger
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Mike Frysinger
• [U-Boot] U-boot for MPC8280 Processor   Scott Wood
• [U-Boot] SPI flash writing   Jason Cooper
• [U-Boot] SPI flash writing   Mike Frysinger
• [U-Boot] undefine reference to `__bss_end__' error   Will Khan
• [U-Boot] ns16550: tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] SPI flash writing   Falauto, Gerlando
• [U-Boot] undefine reference to `__bss_end__' error   Simon Glass
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   David C. Purdy
• [U-Boot] [PATCH V4] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH V4] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH] usb:udc:samsung:fix Remove the req_config flag   Marek Vasut
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] SPI flash writing   Mike Frysinger
• [U-Boot] SPI flash writing   Simon Glass
• [U-Boot] [PATCH V4] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH v3] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH V4] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Mike Frysinger
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH v3] mx6: Read silicon revision from register   Liu Hui-R64343
• [U-Boot] [PATCH] EXYNOS: Detect cpuid based on Exynos product codes   Chander Kashyap
• [U-Boot] SPI flash writing   Gerlando Falauto
• [U-Boot] SPI flash writing   Gerlando Falauto
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] Building uboot image for panda board   old000
• [U-Boot] [PATCH v3] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [U-boot -Users]- Hush shell   periyasamy samy
• [U-Boot] [PATCH v3] mx6: Read silicon revision from register   Wolfgang Grandegger
• [U-Boot] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Chander Kashyap
• [U-Boot] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Kyungmin Park
• [U-Boot] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Chander Kashyap
• [U-Boot] Device tree in uboot eeprom environment   jonsmirl at gmail.com
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   Prafulla Wadaskar
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Dirk Behme
• [U-Boot] Is it possible to send HDMI signal from u-boot on PandaBoard?   Qiao.HelloWorld at gmail.com
• [U-Boot] [PATCH v3] mx6: Read silicon revision from register   Eric Nelson
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Stephen Warren
• [U-Boot] Enabling nand createbbt command   Charles Manning
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   David Purdy
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Scott Wood
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Mike Frysinger
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled   Mike Frysinger
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Eric Nelson
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Mike Frysinger
• [U-Boot] SPI flash writing   Tom Rini
• [U-Boot] SPI flash writing   Mike Frysinger
• [U-Boot] SPI flash writing   Mike Frysinger
• [U-Boot] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Minkyu Kang
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [PATCH v4 01/27] arm: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v4 02/27] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v4 03/27] arm: Only display frame buffer info if there is LCD/video support   Simon Glass
• [U-Boot] [PATCH v4 04/27] x86: Remove dead code in eNET   Simon Glass
• [U-Boot] [PATCH v4 05/27] x86: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH v4 06/27] ppc: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH v4 08/27] Introduce generic u-boot.h file   Simon Glass
• [U-Boot] [PATCH v4 09/27] Introduce generic link section.h symbol files   Simon Glass
• [U-Boot] [PATCH v4 10/27] arm: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH v4 11/27] x86: Change stub example to use asm-generic/sections.h   Simon Glass
• [U-Boot] [PATCH v4 12/27] Introduce a basic initcall implementation   Simon Glass
• [U-Boot] [PATCH v4 13/27] Define CONFIG_SYS_LEGACY_BOARD everywhere   Simon Glass
• [U-Boot] [PATCH v4 14/27] Introduce generic pre-relocation board_f.c   Simon Glass
• [U-Boot] [PATCH v4 15/27] Introduce generic post-relocation board_r.c   Simon Glass
• [U-Boot] [PATCH v4 16/27] Add spl load feature   Simon Glass
• [U-Boot] [PATCH v4 17/27] arm: Enable generic board support   Simon Glass
• [U-Boot] [PATCH v4 18/27] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols   Simon Glass
• [U-Boot] [PATCH v4 19/27] x86: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH v4 20/27] Add x86 fields to generic global_data   Simon Glass
• [U-Boot] [PATCH v4 21/27] x86: Enable generic board support   Simon Glass
• [U-Boot] [PATCH v4 22/27] Add ppc fields to generic global data   Simon Glass
• [U-Boot] [PATCH v4 23/27] Adjust board_f for ppc   Simon Glass
• [U-Boot] [PATCH v4 24/27] Adjust board_r.c for PowerPC   Simon Glass
• [U-Boot] [PATCH v4 25/27] ppc: Enable generic board board   Simon Glass
• [U-Boot] [PATCH v4 26/27] tegra: Mark board init files for ARMv4t   Simon Glass
• [U-Boot] [PATCH v4 27/27] tegra: Enable generic board for Seaboard.   Simon Glass
• [U-Boot] [PATCH v4 04/27] x86: Remove dead code in eNET   Graeme Russ
• [U-Boot] [PATCH v4 04/27] x86: Remove dead code in eNET   Simon Glass
• [U-Boot] [PATCH v4 11/27] x86: Change stub example to use asm-generic/sections.h   Graeme Russ
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Graeme Russ
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Graeme Russ
• [U-Boot] [PATCH v4 20/27] Add x86 fields to generic global_data   Graeme Russ
• [U-Boot] [PATCH v4 11/27] x86: Change stub example to use asm-generic/sections.h   Simon Glass
• [U-Boot] [PATCH v4 11/27] x86: Change stub example to use asm-generic/sections.h   Graeme Russ
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH v4 20/27] Add x86 fields to generic global_data   Simon Glass
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Graeme Russ
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Chander Kashyap
• [U-Boot] [PATCH v2] EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc   Chander Kashyap
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Simon Glass
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] [Samsung] [PATCH] EXYNOS: Rename exynos5_tzpc structure to s5p_tzpc   Tushar Behera
• [U-Boot] [PATCH 1/3 v3] sandbox: SPI emulation bus   Simon Glass
• [U-Boot] [PATCH 2/3 v3] sandbox: new SPI flash driver   Simon Glass
• [U-Boot] [PATCH] WIP: fdt: Add serial port controlled by device tree   Simon Glass
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Heiko Schocher
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Simon Glass
• [U-Boot] [PATCH 2/3 v3] sandbox: new SPI flash driver   Mike Frysinger
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Heiko Schocher
• [U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Christian Riesch
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   Prafulla Wadaskar
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH V2 2/3] i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE   Stefano Babic
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Liu Hui-R64343
• [U-Boot] [PATCH] mmc: fsl_esdhc: Add workaround for auto-clock gate errata ENGcm03648   Stefano Babic
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] u-boot for SPEAr1310   Pavel Machek
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] [PATCH V14 01/13] Add cmd_spl command   Stefano Babic
• [U-Boot] [PATCH V14 02/13] devkit8000: add config for spl command   Stefano Babic
• [U-Boot] [PATCH V14 03/13] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V14 04/13] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
• [U-Boot] [PATCH V14 05/13] omap-common/spl: Add linux boot to SPL   Stefano Babic
• [U-Boot] [PATCH V14 06/13] omap/spl: change output of spl_parse_image_header   Stefano Babic
• [U-Boot] [PATCH V14 07/13] devkit8000: Implement and activate direct OS boot   Stefano Babic
• [U-Boot] [PATCH V14 08/13] Add cache functions to SPL for armv7   Stefano Babic
• [U-Boot] [PATCH V14 09/13] OMAP3: SPL: do not call I2C init if no I2C is set.   Stefano Babic
• [U-Boot] [PATCH V14 10/13] SPL: call cleanup_before_linux() before booting Linux   Stefano Babic
• [U-Boot] [PATCH V14 11/13] OMAP3: twister: add support to boot Linux from SPL   Stefano Babic
• [U-Boot] [PATCH V14 12/13] arm: Add Prep subcommand support to bootm   Stefano Babic
• [U-Boot] [PATCH V14 13/13] cam_enc_4xx: Rename 'images' to 'imgs'   Stefano Babic
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   David Purdy
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Wolfgang Denk
• [U-Boot] [PATCH v2] cfi: fix the incomplete erased status check in buffer write   htbegin
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Wolfgang Denk
• [U-Boot] Device tree in uboot eeprom environment   Wolfgang Denk
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Simon Glass
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] Device tree in uboot eeprom environment   jonsmirl at gmail.com
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] [PATCH V3] BOOT: Add "bootz" command to boot Linux zImage   Marek Vasut
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH V5] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH v4 06/27] ppc: Add initial memory barrier macros   Scott Wood
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Rob Herring
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH v4 14/27] Introduce generic pre-relocation board_f.c   Scott Wood
• [U-Boot] [PATCH v4 23/27] Adjust board_f for ppc   Scott Wood
• [U-Boot] [PATCH v4 16/27] Add spl load feature   Scott Wood
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Rob Herring
• [U-Boot] DEVELOPER's MEETING   Mike Frysinger
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Wolfgang Denk
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Wolfgang Denk
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Wolfgang Denk
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Rob Herring
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] [PATCH v4 14/27] Introduce generic pre-relocation board_f.c   Simon Glass
• [U-Boot] [PATCH v4 14/27] Introduce generic pre-relocation board_f.c   Scott Wood
• [U-Boot] [PATCH v4 23/27] Adjust board_f for ppc   Simon Glass
• [U-Boot] [PATCH 1/2] cmd_bdinfo: display the address map size (32-bit vs. 36-bit)   Timur Tabi
• [U-Boot] [PATCH 2/2] [v3] powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot   Timur Tabi
• [U-Boot] [PATCH v2] kirkwood: add support for Cloud Engines Pogoplug E02   David Purdy
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Rob Herring
• [U-Boot] i2c support for samsung s5pv310 in u-boot   Avinash H.M.
• [U-Boot] i2c support for samsung s5pv310 in u-boot   Avinash H.M.
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] [PATCH] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM926EJS: Implement cache operations   Marek Vasut
• [U-Boot] ext2 file system performance   jonsmirl at gmail.com
• [U-Boot] [PATCH v3] kirkwood: add support for Cloud Engines Pogoplug E02   David C. Purdy
• [U-Boot] DEVELOPER's MEETING   Macpaul Lin
• [U-Boot] DEVELOPER's MEETING   Marek Vasut
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Marek Vasut
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Mike Frysinger
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Eric Nelson
• [U-Boot] [PATCH 0/9] iMX/MXS: Get ready for cache   Marek Vasut
• [U-Boot] [PATCH 1/9] ARM926EJS: Implement cache operations   Marek Vasut
• [U-Boot] [PATCH 2/9] i.MX28: Add cache support into the APBH DMA driver   Marek Vasut
• [U-Boot] [PATCH 3/9] i.MX28: Add cache support to MXS NAND driver   Marek Vasut
• [U-Boot] [PATCH 4/9] MMC: Implement generic bounce buffer   Marek Vasut
• [U-Boot] [PATCH 5/9] i.MX28: Do data transfers via DMA in MMC driver   Marek Vasut
• [U-Boot] [PATCH 6/9] i.MX28: Make use of the bounce buffer   Marek Vasut
• [U-Boot] [PATCH 7/9] i.MX28: Enable caches by default   Marek Vasut
• [U-Boot] [PATCH 8/9] net: force PKTALIGN to ARCH_DMA_MINALIGN   Marek Vasut
• [U-Boot] [PATCH 9/9] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 0/9] iMX/MXS: Get ready for cache   Marek Vasut
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH V2] MMC: Implement generic bounce buffer   Marek Vasut
• [U-Boot] ext2 file system performance   Marek Vasut
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Marek Vasut
• [U-Boot] [PATCH v4 14/27] Introduce generic pre-relocation board_f.c   Wolfgang Denk
• [U-Boot] making use of commands in standalone application   Haneef Mohamed
• [U-Boot] [PATCH] add new board nas62x0   DrEagle
• [U-Boot] making use of commands in standalone application   Wolfgang Denk
• [U-Boot] [PATCH] add new board nas62x0   Wolfgang Denk
• [U-Boot] [PATCH] add new board nas62x0   Wolfgang Denk
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Wolfgang Denk
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Wolfgang Denk
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] [PATCH] add new board nas62x0   Wolfgang Denk
• [U-Boot] [PATCH v3] kirkwood: add support for Cloud Engines Pogoplug E02   Wolfgang Denk
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Sricharan R
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH] README: supported boards are in boards.cfg, not Makefile   Michael Jones
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] execution of standalone hello_world not happening   Haneef Mohamed
• [U-Boot] A question about mpc85xx tlb1   徐阳
• [U-Boot] execution of standalone hello_world not happening   Haneef Mohamed
• [U-Boot] DEVELOPER's MEETING   Wolfgang Denk
• [U-Boot] POLL: DEVELOPER's MEETING   Wolfgang Denk
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] execution of standalone hello_world not happening   Wolfgang Denk
• [U-Boot] [PATCH] i.MX28: Drop __naked function from spl_mem_init   Marek Vasut
• [U-Boot] [PATCH V2] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] execution of standalone hello_world not happening   Marek Vasut
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   Tom Rini
• [U-Boot] [PATCH v4] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH 1/2] tools, config.mk: Add gcc-version.sh, cc-version test from Linux   Tom Rini
• [U-Boot] [PATCH 2/2] Makefile: Add a 'checkthumb' rule   Tom Rini
• [U-Boot] [PATCH] sh: Fix building ecovec board   Phil Edworthy
• [U-Boot] [PATCH V2] BOOT: Add RAW ramdisk support to bootz   Rob Herring
• [U-Boot] [PATCH 2/2] Makefile: Add a 'checkthumb' rule   Mike Frysinger
• [U-Boot] [PATCH] net: force PKTALIGN to ARCH_DMA_MINALIGN   Mike Frysinger
• [U-Boot] [PATCH v2] Makefile: Add a 'checkthumb' rule   Tom Rini
• [U-Boot] [PATCH] i.MX28: Drop __naked function from spl_mem_init   Tom Rini
• [U-Boot] [PATCH 2/2] Makefile: Add a 'checkthumb' rule   Tom Rini
• [U-Boot] Please pull u-boot-ti/next   Tom Rini
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] [PATCH] sdrc.c: Fix typo in do_sdrc_init() for SPL   Tom Rini
• [U-Boot] A question about mpc85xx tlb1   Scott Wood
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Rob Herring
• [U-Boot] [PATCH] arm: Don't use printf() in SPL builds   Sughosh Ganu
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Tom Rini
• [U-Boot] SPL Linux Boot   Wolfgang Denk
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [PATCH v2] Makefile: Add a 'checkthumb' rule   Mike Frysinger
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Tom Rini
• [U-Boot] [PATCH] mx5: Add clock config interface   Fabio Estevam
• [U-Boot] [RFC] mx53loco: Add 1GHz support   Fabio Estevam
• [U-Boot] SPL Linux Boot   Wolfgang Denk
• [U-Boot] [RFC] mx53loco: Add 1GHz support   Fabio Estevam
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] [PATCH V2] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH] pmic_i2c: Return error in case of invalid pmic_i2c_tx_num   Fabio Estevam
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Marek Vasut
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Tom Rini
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [PATCH v4 0/27] Create generic board init for ARM, x86, PPC   Tom Rini
• [U-Boot] [PATCH] pmic_i2c: Return error in case of invalid pmic_i2c_tx_num   Marek Vasut
• [U-Boot] [PATCH] ARM: Fix malloc area size for versatile and integrator   Marek Vasut
• [U-Boot] SPL Linux Boot   Thomas Weber
• [U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms   R, Sricharan
• [U-Boot] SPL Linux Boot   stefano babic
• [U-Boot] [RFC] mx53loco: Add 1GHz support   stefano babic
• [U-Boot] Secure update of uboot devices?   Andreas Bäck
• [U-Boot] [PATCH] mmc: fsl_esdhc: Add workaround for auto-clock gate errata ENGcm03648   Dirk Behme
• [U-Boot] [PATCH] i.MX: fsl_esdhc: allow use with cache enabled.   Stefano Babic
• [U-Boot] [PATCH] mmc: fsl_esdhc: Add workaround for auto-clock gate errata ENGcm03648   Stefano Babic
• [U-Boot] [RFC] mx53loco: Add 1GHz support   Fabio Estevam
• [U-Boot] SPL Linux Boot   Wolfgang Denk
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] [RFC] mx53loco: Add 1GHz support   stefano babic
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] [PATCH v4] kirkwood: add support for Cloud Engines Pogoplug E02   Dave Purdy
• [U-Boot] SPL Linux Boot   Wolfgang Denk
• [U-Boot] [PATCH] mxsboot: fix tool name in usage message   Otavio Salvador
• [U-Boot] [PATCH] mxsboot: fix tool name in usage message   Wolfgang Denk
• [U-Boot] Please pull u-boot-sh/master   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (sandbox branch)   Wolfgang Denk
• [U-Boot] pull request for u-boot-avr32   Wolfgang Denk
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Wolfgang Denk
• [U-Boot] [PATCH 1/2] image: add support for Android's boot image format   Wolfgang Denk
• [U-Boot] [PATCH 1/2] image: add support for Android's boot image format   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Timur Tabi
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Tabi Timur-B04825
• [U-Boot] [PATCH v2] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH v2] add new board nas62x0   Luka Perkov
• [U-Boot] coding style of boards.cfg   Luka Perkov
• [U-Boot] How to specify the TEXT_BASE   jingchaotian6
• [U-Boot] u-boot sandbox crash   Marek Vasut
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Wolfgang Denk
• [U-Boot] [PATCH v2] add new board nas62x0   Wolfgang Denk
• [U-Boot] [PATCH v3] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH v2] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH v3] video: cfb_console: Make the software cursor non-destructive   Wolfgang Denk
• [U-Boot] [PATCH 2/4] dfu: generic backend parts   Wolfgang Denk
• [U-Boot] [PATCH v3] video: cfb_console: Make the software cursor non-destructive   Anatolij Gustschin
• [U-Boot] [PATCH v2] CPCI750: Add CPCI-HD/2 support   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net/miiphy/serial: drop duplicate "NAMESIZE" define   Wolfgang Denk
• [U-Boot] [PATCH v2] bootvx: Clear and disable data cache, and call vxWorks with parameter.   Wolfgang Denk
• [U-Boot] [PATCH v3] video: cfb_console: Make the software cursor non-destructive   Wolfgang Denk
• [U-Boot] [PATCH v3 01/15] bootstage: Create an initial header for boot progress integers   Wolfgang Denk
• [U-Boot] [PATCH v3 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()   Wolfgang Denk
• [U-Boot] [PATCH v3 03/15] bootstage: Use show_boot_error() for -ve progress numbers   Wolfgang Denk
• [U-Boot] [PATCH v3 04/15] bootstage: Convert progress numbers 1-9 into enums   Wolfgang Denk
• [U-Boot] [PATCH v3 05/15] bootstage: Convert progress numbers 10-19 to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 06/15] bootstage: Convert progress numbers 20-41 to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 07/15] bootstage: Convert IDE progress numbers to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 08/15] bootstage: Convert NAND progress numbers to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 09/15] bootstage: Convert net progress numbers to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 10/15] bootstage: Convert FIT progress numbers to enums   Wolfgang Denk
• [U-Boot] [PATCH v3 11/15] timer: add microsecond boot func   Wolfgang Denk
• [U-Boot] [PATCH v4 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Wolfgang Denk
• [U-Boot] [PATCH v4 13/15] bootstage: Implement core microsecond boot time measurement   Wolfgang Denk
• [U-Boot] [PATCH v3 14/15] bootstage: Plumb in bootstage calls for basic operations   Wolfgang Denk
• [U-Boot] [PATCH v4 15/15] bootstage: arm: Add bootstage calls in board and bootm   Wolfgang Denk
• [U-Boot] [PATCH v2 0/2] Add i2c TPM driver   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_fat: add FAT write command   Wolfgang Denk
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Rob Herring
• [U-Boot] MMC broken after a7778f8fbee098c78b1fa1e1331313a7e217fb30   Grazvydas Ignotas
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] Enabling nand createbbt command   Bud Miljkovic
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] ARM: Fix malloc area size for versatile and integrator   Linus Walleij
• [U-Boot] [PATCH] ARM: Fix malloc area size for versatile and integrator   Marek Vasut
• [U-Boot] OMAP USB, beagle-xm fail   Marek Vasut
• [U-Boot] u-boot sandbox crash   Mike Frysinger
• [U-Boot] coding style of boards.cfg   Mike Frysinger
• [U-Boot] [PATCH v3] global_data: unify global flag defines   Mike Frysinger
• [U-Boot] u-boot sandbox crash   Marek Vasut
• [U-Boot] OMAP USB, beagle-xm fail   Tom Rini
• [U-Boot] u-boot sandbox crash   Simon Glass
• [U-Boot] [PATCH] mxs_spi: Return proper timeout error   Fabio Estevam
• [U-Boot] [PATCH] mxs_spi: Return proper timeout error   Marek Vasut
• [U-Boot] [PATCH] mxs_spi: Return proper timeout error   Mike Frysinger
• [U-Boot] [PATCH] mxs_spi: Return proper timeout error   Marek Vasut
• [U-Boot] execution of standalone hello_world not happening   Haneef Mohamed
• [U-Boot] [PULL] u-boot-usb/master   Wolfgang Denk
• [U-Boot] [PATCH v3 13/15] bootstage: Implement core microsecond boot time measurement   Wolfgang Denk
• [U-Boot] [PATCH 1/2] nds32: fix ptrace and interrupt register overflow   Macpaul Lin
• [U-Boot] [PATCH v2 2/2] nds32/n1213: correct vector table in start.S   Macpaul Lin
• [U-Boot] Pull request for u-boot-nds32   Macpaul Lin
• [U-Boot] [PATCH] ETX094: adjust linker script due to grown code size   Wolfgang Denk
• [U-Boot] [PATCH v4 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Wolfgang Denk
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Shiraz Hashim
• [U-Boot] Program Check ERROR in custom p4080 board   Ishwar Saunshi
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [u-boot] How to configure CONFIG_SYS_INIT_SP_ADDR   jagan
• [U-Boot] [PATCH v2 0/2] Add i2c TPM driver   Che-liang Chiou
• [U-Boot] [u-boot] do_reset refined error on v11.12   jagan
• [U-Boot] [PATCH v2 0/2] Add i2c TPM driver   Wolfgang Denk
• [U-Boot] [PATCH] twl4030: fix potential power supply handling issues   Grazvydas Ignotas
• [U-Boot] [PATCH] mmc: omap: follow TRM procedure to power on cards   Grazvydas Ignotas
• [U-Boot] [PATCH] Fix: brocken boot message at serial line on AT91SAM9263-EK board   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case   Stefano Babic
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 2/2] mx6: Remove duplicate definition of ANATOP_BASE_ADDR   Stefano Babic
• [U-Boot] [PATCH v4] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)   esw at bus-elektronik.de
• [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Tom Warren
• [U-Boot] [PATCH] mx5: Add clock config interface   Stefano Babic
• [U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE   Stefano Babic
• [U-Boot] [PATCH V2 2/3] i.MX6: implement enable_caches()   Stefano Babic
• [U-Boot] [PATCH V2 3/3] i.MX6: mx6qsabrelite: add cache commands if cache is enabled   Stefano Babic
• [U-Boot] [PATCH v8] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH] pmic_i2c: Return error in case of invalid pmic_i2c_tx_num   Lukasz Majewski
• [U-Boot] [PATCH] pmic_i2c: Return error in case of invalid pmic_i2c_tx_num   Stefano Babic
• [U-Boot] [PATCH] mmc: omap: follow TRM procedure to power on cards   Tom Rini
• [U-Boot] [PATCH] pmic_i2c: Return error in case of invalid pmic_i2c_tx_num   Stefano Babic
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] [PATCH] mmc: omap: follow TRM procedure to power on cards   Grazvydas Ignotas
• [U-Boot] [PATCH V14 12/13] arm: Add Prep subcommand support to bootm   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Simon Glass
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH 3/5] tegra: Export the UART setup function for use by boards   Simon Glass
• [U-Boot] [PATCH 4/5] tegra: Provide tegra_pre_console_panic() for early panics   Simon Glass
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Simon Glass
• [U-Boot] [PATCH 4/5] tegra: Provide tegra_pre_console_panic() for early panics   Stephen Warren
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Stephen Warren
• [U-Boot] Enabling nand createbbt command   Charles Manning
• [U-Boot] [PATCH v5] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH] mmc: omap: improve stat wait message   Grazvydas Ignotas
• [U-Boot] [PATCH] mmc: omap: handle controller errors properly   Grazvydas Ignotas
• [U-Boot] [PATCH] ARM: OMAP3: pandora: re-enable NAND soft ECC   Grazvydas Ignotas
• [U-Boot] [PATCH] mmc: omap: handle controller errors properly   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP3: pandora: re-enable NAND soft ECC   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP3: pandora: re-enable NAND soft ECC   Grazvydas Ignotas
• [U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors   Fabio Estevam
• [U-Boot] [PATCH v2] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH 4/5] tegra: Provide tegra_pre_console_panic() for early panics   Simon Glass
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Simon Glass
• [U-Boot] [PATCH] mmc: omap: handle controller errors properly   Tom Rini
• [U-Boot] [PATCH] mx53ard: Initialize return code with error   Fabio Estevam
• [U-Boot] [PATCH] mmc: omap: improve stat wait message   Tom Rini
• [U-Boot] [PATCH] mmc: omap: follow TRM procedure to power on cards   Tom Rini
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Stephen Warren
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Simon Glass
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Stephen Warren
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Simon Glass
• [U-Boot] [PATCH v2 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH v2 3/5] tegra: Export the UART setup function for use by boards   Simon Glass
• [U-Boot] [PATCH v2 4/5] tegra: Provide tegra_pre_console_panic() for early panics   Simon Glass
• [U-Boot] [PATCH v2 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Simon Glass
• [U-Boot] [PATCH v3 13/15] bootstage: Implement core microsecond boot time measurement   Simon Glass
• [U-Boot] [PATCH] bootstage: Fix build error for standalone API example   Simon Glass
• [U-Boot] [PATCH v4 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Simon Glass
• [U-Boot] [PATCH v5] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors   Stefano Babic
• [U-Boot] [PATCH] mx53ard: Initialize return code with error   Stefano Babic
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors   Marek Vasut
• [U-Boot] [PATCH v2] add new board nas62x0   DrEagle
• [U-Boot] [PATCH 1/9] ARM926EJS: Implement cache operations   Stefano Babic
• [U-Boot] [PATCH] i.MX28: Make the stabilization delays shorter   Stefano Babic
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Stefano Babic
• [U-Boot] [PATCH] mxs_spi: Return proper timeout error   Stefano Babic
• [U-Boot] LAN9514 on Beagleboard   Maximilian Schwerin
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Marek Vasut
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Wolfgang Denk
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Marek Vasut
• [U-Boot] [PATCH] include/mmc.h: remove struct mmc_csd   Andreas Bießmann
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Stefano Babic
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Stefano Babic
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Stefano Babic
• [U-Boot] Building uboot image for panda board   mr894381 at gmail.com
• [U-Boot] LAN9514 on Beagleboard   Peter Meerwald
• [U-Boot] TI DM3730 - NAND   Prashant Shah
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Fabio Estevam
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Eric Nelson
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH V2] i.MX28: Drop __naked function from spl_mem_init   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Scott Wood
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Wolfgang Denk
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Stephen Warren
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH V4] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH] README.mx28: add   Otavio Salvador
• [U-Boot] [RESEND] ca9x4_ct_vxp build error   Marek Vasut
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH 1/5] pmic: Add support for the Dialog DA9053 PMIC   Fabio Estevam
• [U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk()   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx5: Add clock config interface   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx53loco: Allow to print CPU information at a later stage   Fabio Estevam
• [U-Boot] [PATCH 5/5] mx53loco: Add support for 1GHz operation for DA9053-based boards   Fabio Estevam
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Graeme Russ
• [U-Boot] [PATCH] README.mx28: add   Fabio Estevam
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH v2] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Stephen Warren
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH v4] add new board nas62x0   Luka Perkov
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH v2] README.mx28: add   Otavio Salvador
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Simon Glass
• [U-Boot] [PATCH 2/3 v3] sandbox: new SPI flash driver   Simon Glass
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Liu Hui-R64343
• [U-Boot] [PATCH] sh_spi: Add 4 chip select signals supporting   Nobuhiro Iwamatsu
• [U-Boot] powerpc/85xx:debugger support patch   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/4][v2] doc:Add documentation for e500 external debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/4] powerpc/85xx:Fix NAND code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH] sh: Fix building ecovec board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add header file of MMC framework   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] sh: ecovec: Remove unused variable   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] usb: r8a66597: Switched from variable to only macro   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] sh: Add header file for interface of SH MMC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] sh: sh7757lcr: Add MMC header file of SH   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4] add new board nas62x0   Igor Grinberg
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: r8a66597: Switched from variable to only macro   Marek Vasut
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Wolfgang Denk
• [U-Boot] [PATCH 3/5] tegra: Export the UART setup function for use by boards   Wolfgang Denk
• [U-Boot] [PATCH 5/5] tegra: Implement board_pre_console_panic() for Seaboard   Wolfgang Denk
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] sh: Fix building ecovec board   phil.edworthy at renesas.com
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Anatolij Gustschin
• [U-Boot] [PATCH v4] add new board nas62x0   Prafulla Wadaskar
• [U-Boot] [PATCH v2] add new board nas62x0   Prafulla Wadaskar
• [U-Boot] Bug in cfb_console driver   Pali Rohár
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH v4] add new board nas62x0   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] OMAP3: mt_ventoux: updated timing for FPGA   Stefano Babic
• [U-Boot] [PATCH 2/2] OMAP3: mt_ventoux: sets its own mtdparts   Stefano Babic
• [U-Boot] [PATCH v2] add new board nas62x0   Prafulla Wadaskar
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Marek Vasut
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH v2] add new board nas62x0   Marek Vasut
• [U-Boot] [PATCH v2] README.mx28: add   Fabio Estevam
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Anatolij Gustschin
• [U-Boot] [PATCH] NAND: TI: fix warnings in omap_gpmc.c   Stefano Babic
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Anatolij Gustschin
• [U-Boot] [PATCH v2] add new board nas62x0   Prafulla Wadaskar
• [U-Boot] Bug in cfb_console driver   Anatolij Gustschin
• [U-Boot] [PATCH 0/6] updates for keymile powerpc83xx boards   Holger Brunck
• [U-Boot] [PATCH 1/6] powerpc/83xx/km: use tuxx1.h for kmsupx5 target   Holger Brunck
• [U-Boot] [PATCH 2/6] powerpc83xx/km: lock the window size to 2GiB befor fixing sdram size   Holger Brunck
• [U-Boot] [PATCH 3/6] powerpc83xx/km: remove unneeded CONFIG_PCI for kmeter1   Holger Brunck
• [U-Boot] [PATCH 4/6] km/common: add support for second flash   Holger Brunck
• [U-Boot] [PATCH 5/6] powerpc/83xx: add kmcoge5ne board support   Holger Brunck
• [U-Boot] [PATCH 6/6] MAINTAINERS: cleanup for keymile boards   Holger Brunck
• [U-Boot] How to specify the TEXT_BASE   jingchaotian6
• [U-Boot] [BUG] cfi_flash can't work correctly on latest uboot   Stefan Roese
• [U-Boot] Targets in the Makefile, SPL and .img   jonsmirl at gmail.com
• [U-Boot] [PATCH v2] README.mx28: add   Stefano Babic
• [U-Boot] [PATCH v2] README.mx28: add   Fabio Estevam
• [U-Boot] [PATCH v2] README.mx28: add   Otavio Salvador
• [U-Boot] [PATCH v3] README.mx28evk: add   Otavio Salvador
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH v2] README.mx28: add   Wolfgang Denk
• [U-Boot] [PATCH] mx53: Make PLL2 to be the parent of UART clock   Fabio Estevam
• [U-Boot] [PATCH 00/21] updates for keymile arm boards   Holger Brunck
• [U-Boot] [PATCH 01/21] arm/km: add board type to boards.cfg   Holger Brunck
• [U-Boot] [PATCH 02/21] arm/km: add piggy mac adress offset for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 03/21] arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE   Holger Brunck
• [U-Boot] [PATCH 04/21] arm/km: use ARRAY_SIZE macro   Holger Brunck
• [U-Boot] [PATCH 05/21] arm/km: fix wrong comment in SDRAM config for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 06/21] arm/km: change maintainer for mgcoge3un   Holger Brunck
• [U-Boot] [PATCH 07/21] arm/km: remove CONFIG_RESET_PHY_R   Holger Brunck
• [U-Boot] [PATCH 08/21] arm/km: enable mii cmd   Holger Brunck
• [U-Boot] [PATCH 09/21] arm/km: use correct kw_gpio function for NAND/SPI switching   Holger Brunck
• [U-Boot] [PATCH 10/21] spi/kirkwood: add weak functions board_spi_bus_claim/release   Holger Brunck
• [U-Boot] [PATCH 11/21] arm/km: implement weak function board_spi_clam_bus/release   Holger Brunck
• [U-Boot] [PATCH 12/21] arm/kirkwood: protect the ENV_SPI #defines   Holger Brunck
• [U-Boot] [PATCH 13/21] km/arm: remove spi toggle command   Holger Brunck
• [U-Boot] [PATCH 14/21] mvgbe: remove warning for unused methods   Holger Brunck
• [U-Boot] [PATCH 15/21] arm/km: add kmnusa board support   Holger Brunck
• [U-Boot] [PATCH 16/21] arm/km: add kmcoge5un board support   Holger Brunck
• [U-Boot] [PATCH 17/21] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
• [U-Boot] [PATCH 18/21] arm/km: remove portl2.h and use km_kirkwood instead   Holger Brunck
• [U-Boot] [PATCH 19/21] arm/km: correct init of 88e6352 switch in the reset_phy function   Holger Brunck
• [U-Boot] [PATCH 20/21] arm/km: enable BOCO2 FPGA download support   Holger Brunck
• [U-Boot] [PATCH 21/21] arm/km: cleanup km_kirkwood boards   Holger Brunck
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH 14/21] mvgbe: remove warning for unused methods   Prafulla Wadaskar
• [U-Boot] [PATCH 10/21] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4][v2] doc:Add documentation for e500 external debugger support   Scott Wood
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH 1/4][v2] doc:Add documentation for e500 external debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH] mx53: Make PLL2 to be the parent of UART clock   Otavio Salvador
• [U-Boot] [RESEND] ca9x4_ct_vxp build error   Matt Waddel
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Stephen Warren
• [U-Boot] [PATCH] NAND: TI: fix warnings in omap_gpmc.c   Scott Wood
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Pali Rohár
• [U-Boot] [PATCH] mmc: omap: handle controller errors properly   Pali Rohár
• [U-Boot] [PATCH] README.mx28: add   Marek Vasut
• [U-Boot] [PATCH] README.mx28: add   Otavio Salvador
• [U-Boot] [RESEND] ca9x4_ct_vxp build error   Marek Vasut
• [U-Boot] [PATCH v3] README.mx28evk: add   Marek Vasut
• [U-Boot] [PATCH] README.mx28: add   Marek Vasut
• [U-Boot] [PATCH v3] README.mx28evk: add   Otavio Salvador
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH] mmc: omap: handle controller errors properly   Pali Rohár
• [U-Boot] Targets in the Makefile, SPL and .img   Tom Rini
• [U-Boot] Targets in the Makefile, SPL and .img   jonsmirl at gmail.com
• [U-Boot] Targets in the Makefile, SPL and .img   Tom Rini
• [U-Boot] Targets in the Makefile, SPL and .img   jonsmirl at gmail.com
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Anatolij Gustschin
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH 2/5] Add board_panic_no_console() to deal with early critical errors   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH v4][resend?] kirkwood: add support for Cloud Engines Pogoplug E02   David Purdy
• [U-Boot] Patchwork housekeeping   Graeme Russ
• [U-Boot] [PATCH] sh: Fix building ecovec board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] Patchwork housekeeping   Marek Vasut
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Dirk Behme
• [U-Boot] [PATCH 14/21] mvgbe: remove warning for unused methods   Holger Brunck
• [U-Boot] [PATCH 10/21] spi/kirkwood: add weak functions board_spi_bus_claim/release   Holger Brunck
• [U-Boot] Question: Installing U-Boot on the Karo TX25   Züger Martin
• [U-Boot] [PATCH v6] mx6: Read silicon revision from register   Stefano Babic
• [U-Boot] [PATCH 14/21] mvgbe: remove warning for unused methods   Prafulla Wadaskar
• [U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors   Liu Hui-R64343
• [U-Boot] patchwork: net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
• [U-Boot] patchwork: miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Dirk Behme
• [U-Boot] reminder for [PATCH 0/5] Support for qualcomm msm7630 board   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Pali Rohár
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH 10/21] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH] NAND: TI: fix warnings in omap_gpmc.c   Stefano Babic
• [U-Boot] [PATCH V2] NAND: TI: fix warnings in omap_gpmc.c   Stefano Babic
• [U-Boot] patchwork: miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Graeme Russ
• [U-Boot] patchwork: net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Graeme Russ
• [U-Boot] Patchwork housekeeping   Graeme Russ
• [U-Boot] Patchwork housekeeping   Marek Vasut
• [U-Boot] AT91RM9200DK Support   Jordan Bouyat
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Rob Herring
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] exporting the U-Boot functions to standalone application   Haneef Mohamed
• [U-Boot] AT91RM9200DK Support   Andreas Bießmann
• [U-Boot] Question: Installing U-Boot on the Karo TX25   Stefano Babic
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] exporting the U-Boot functions to standalone application   Wolfgang Denk
• [U-Boot] exporting the U-Boot functions to standalone application   Haneef Mohamed
• [U-Boot] [PATCH 1/2] FAT write: Fix compile errors   Maximilian Schwerin
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Maximilian Schwerin
• [U-Boot] Question: Installing U-Boot on the Karo TX25   Stefano Babic
• [U-Boot] Patchwork housekeeping   Tom Rini
• [U-Boot] [PATCH v2] README.mx28: add   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH v2] README.mx28: add   Otavio Salvador
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Doug Anderson
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Rob Herring
• [U-Boot] Patchwork housekeeping   McClintock Matthew-B29882
• [U-Boot] [PATCH] USB: ehci-mx6: Add proper IO accessors   Stefano Babic
• [U-Boot] Patchwork housekeeping   Scott Wood
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] Patchwork housekeeping   Tom Rini
• [U-Boot] [RFC v0 0/11]: Add <configs/omap3_common.h>   Tom Rini
• [U-Boot] [RFC v0 01/11] omap3+: Introduce <configs/omap3_common.h>   Tom Rini
• [U-Boot] [RFC v0 02/11] omap3: Move DISPLAY_CPUINFO / DISPLAY_BOARDINFO to common   Tom Rini
• [U-Boot] [RFC v0 03/11] omap3: Move V_OSCK / V_SCLK to omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 04/11] omap3: Move '#undef CONFIG_USE_IRQ' to omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 05/11] omap3: Move CONFIG_MISC_INIT_R to omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 06/11] omap3: Move ATAGS and OF_LIBFDT to omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 07/11] omap3: Move SYS_MALLOC_LEN and ENV_SIZE to omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 08/11] omap3: Consolidate UART information in omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 09/11] omap3: Consolidate HSMMC support into omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 10/11] omap3: Consolidate NAND information in omap3_common.h   Tom Rini
• [U-Boot] [RFC v0 11/11] omap3: Consolidate I2C information into omap3_common.h   Tom Rini
• [U-Boot] Patchwork housekeeping   Khem Raj
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Timur Tabi
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Timur Tabi
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] [PATCH 1/2] OMAP3: mt_ventoux: updated timing for FPGA   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: mt_ventoux: sets its own mtdparts   Tom Rini
• [U-Boot] [PATCH V2] NAND: TI: fix warnings in omap_gpmc.c   Tom Rini
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Troy Kisky
• [U-Boot] exporting the U-Boot functions to standalone application   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Wolfgang Denk
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Graeme Russ
• [U-Boot] [PATCH] OMAP3: pandora: pin mux updates for DM3730 board variant   Grazvydas Ignotas
• [U-Boot] [PATCH] OMAP3: pandora: revise GPIO configuration   Grazvydas Ignotas
• [U-Boot] [PATCH] OMAP3: pandora: drop console kernel argument   Grazvydas Ignotas
• [U-Boot] [PATCH 1/2] mx28evk: Provide default values for SPI bus and chip select   Fabio Estevam
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Fabio Estevam
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Troy Kisky
• [U-Boot] [RFC v0 01/11] omap3+: Introduce <configs/omap3_common.h>   Jason Kridner
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Troy Kisky
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH 1/2] mx28evk: Provide default values for SPI bus and chip select   Marek Vasut
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Marek Vasut
• [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Stefano Babic
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Marek Vasut
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Stefano Babic
• [U-Boot] [PATCH 1/2] mx28evk: Provide default values for SPI bus and chip select   Stefano Babic
• [U-Boot] [PATCH 2/2] configs: imx: Use CONFIG_SF_DEFAULT_CS   Stefano Babic
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Stefano Babic
• [U-Boot] NetConsole & TFTP   Thomas Pohl
• [U-Boot] [PATCH] mx53: Make PLL2 to be the parent of UART clock   Stefano Babic
• [U-Boot] [PATCH] mx53ard: Initialize return code with error   Stefano Babic
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] [PATCH] tegra: Specify debugging serial port at boot.   Simon Glass
• [U-Boot] [RFC v0 01/11] omap3+: Introduce <configs/omap3_common.h>   Tom Rini
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Fabio Estevam
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] USB OTG host mode support in u-boot (Ethernet Over USB)   behnam134
• [U-Boot] NetConsole & TFTP   Wolfgang Denk
• [U-Boot] [PATCH 1/3] net/eth: set status to active before calling init   Sebastian Andrzej Siewior
• [U-Boot] [PATCH 2/3] net/tsec: convert the printf() to serial_printf()   Sebastian Andrzej Siewior
• [U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole   Sebastian Andrzej Siewior
• [U-Boot] [PATCH v2 1/5] Revert "Add board_pre_console_putc to deal with early console output"   Wolfgang Denk
• [U-Boot] Pull request for u-boot-nds32   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] [PATCH] bootstage: Fix build error for standalone API example   Anatolij Gustschin
• [U-Boot] [PATCH] bootstage: Fix build error for standalone API example   Simon Glass
• [U-Boot] [PATCH] cmd_nand: Fix possible uninited max_size variable   Marek Vasut
• [U-Boot] Loading kernel from usb   Calvin Boyd
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] A few things for the release?   Simon Glass
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Dirk Behme
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Dirk Behme
• [U-Boot] [PATCH 1/2] part_dos: align disk buffers on cache line to enable DMA and cache   Dirk Behme
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Dirk Behme
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   stefano babic
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Graeme Russ
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 1/2] mx28: Split the README into a common part and a m28 specific part   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Fabio Estevam
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 1/2] mx28: Split the README into a common part and a m28 specific part   Marek Vasut
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Marek Vasut
• [U-Boot] [PATCH] i.MX: fsl_esdhc: allow use with cache enabled.   Eric Nelson
• [U-Boot] [PATCH] i.MX6: mx6qsabrelite: Add keypress support   Eric Nelson
• [U-Boot] [PATCH v2 1/2] mx28: Split the README into a common part and a m28 specific part   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx28: Split the README into a common part and a m28 specific part   Marek Vasut
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH v4 07/27] Introduce generic global_data   Graeme Russ
• [U-Boot] [PATCH] fs/fat/fat_write.c: Fix GCC 4.6 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] FAT write: Fix compile errors   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Anatolij Gustschin
• [U-Boot] [PATCH] fs/fat/fat_write.c: Fix GCC 4.6 warnings   Anatolij Gustschin
• [U-Boot] Loading kernel from usb   Marek Vasut
• [U-Boot] CONFIG_SYS_FDT_PAD: Why do we need this?   Dirk Behme
• [U-Boot] [PATCH] doc: Fix some typos in different files   Thomas Weber
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH] i.MX: fsl_esdhc: allow use with cache enabled.   Stefano Babic
• [U-Boot] [PATCH V2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 0/6] add zip command support for uboot   adrian.wenl at gmail.com
• [U-Boot] [PATCH 1/6] lib: zlib: import deflate source file from 1.2.5   adrian.wenl at gmail.com
• [U-Boot] [PATCH 2/6] lib: zlib: import trees file from 1.2.5   adrian.wenl at gmail.com
• [U-Boot] [PATCH 3/6] lib: zlib: include deflate into zlib build   adrian.wenl at gmail.com
• [U-Boot] [PATCH 4/6] lib: zlib: remove the limitation for cannot using 0 as start   adrian.wenl at gmail.com
• [U-Boot] [PATCH 5/6] lib: add gzip lib function callback   adrian.wenl at gmail.com
• [U-Boot] [PATCH 6/6] common: add zip command support   adrian.wenl at gmail.com
• [U-Boot] BIOS EMULATOR driver   Viktor Křivák
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Luka Perkov
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH 1/2] pci: get rid of local prototypes   Linus Walleij
• [U-Boot] [PATCH 2/2] pci: declare pciauto functions in header   Linus Walleij
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] (no subject)   Eric Nelson
• [U-Boot] [PATCH 1/2] i.MX6: add enable_sata_clock()   Eric Nelson
• [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] BIOS EMULATOR driver   Viktor Křivák
• [U-Boot] [PATCH V3 0/2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Kyungmin Park
• [U-Boot] Please pull u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] Loading kernel from usb   Marek Vasut
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Eric Nelson
• [U-Boot] kobs-ng tool?   Bud Miljkovic
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Amit Virdi
• [U-Boot] [PATCH 1/2] ColdFire: Rename NANDFLASH_SIZE into CONFIG_NANDFLASH_SIZE for MCF537x   Alison Wang
• [U-Boot] [PATCH 2/2] ColdFire: Update the bitops for ColdFire platform   Alison Wang
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] Question: Installing U-Boot on the Karo TX25   Züger Martin
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Anatolij Gustschin
• [U-Boot] [PATCH] doc: Fix some typos in different files   Anatolij Gustschin
• [U-Boot] [PATCH] calimain, enbw_cmc: Fix typo in comments   Christian Riesch
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Maximilian Schwerin
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Stefano Babic
• [U-Boot] [PATCH 2/2] cmd_fat: add FAT write command   Kyungmin Park
• [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] [PATCH 1/4][v3] doc:Add documentation for e500 external debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/4][v2] powerpc/85xx:Fix NAND code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Wolfgang Denk
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] [PATCH v2] mvgbe: remove warning for unused methods   Valentin Longchamp
• [U-Boot] [PATCH V2] Enable high speed support for USB device framework and usbtty   Amit Virdi
• [U-Boot] [PATCH V2 0/8] net/designware: Bug fixes   Amit Virdi
• [U-Boot] [PATCH V2 1/8] net/designware: Fix to restore hw mac address   Amit Virdi
• [U-Boot] [PATCH V2 2/8] net/designware: Fix the max frame length size   Amit Virdi
• [U-Boot] [PATCH V2 3/8] net/designware: Phy address fix   Amit Virdi
• [U-Boot] [PATCH V2 4/8] net/designware: Consecutive writes must have delay   Amit Virdi
• [U-Boot] [PATCH V2 5/8] net/designware: Try configuring phy on each dw_eth_init   Amit Virdi
• [U-Boot] [PATCH V2 6/8] net/designware: Program phy registers when auto-negotiation is ON   Amit Virdi
• [U-Boot] [PATCH V2 7/8] net/designware: Set ANAR to 0x1e1   Amit Virdi
• [U-Boot] [PATCH V2 8/8] net/designware: Change timeout loop implementation   Amit Virdi
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH v2] mvgbe: remove warning for unused methods   Prafulla Wadaskar
• [U-Boot] Antwort: Re: NetConsole & TFTP   Thomas Pohl
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [PATCH V4] net: fec_mxc: allow use with cache enabled   Marek Vasut
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] [PATCH] OMAP I2C: fix handling of alen = 0   Daniel Mack
• [U-Boot] Patch: Fix device enumeration through API.   Anatolij Gustschin
• [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Amit Virdi
• [U-Boot] [PATCH] mkenvimage: fix usage message   Anatolij Gustschin
• [U-Boot] [PATCH resend] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   Anatolij Gustschin
• [U-Boot] [PATCH v2 00/19] updates for keymile arm boards   Valentin Longchamp
• [U-Boot] [PATCH v2 01/19] arm/km: add board type to boards.cfg   Valentin Longchamp
• [U-Boot] [PATCH v2 02/19] arm/km: add piggy mac adress offset for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v2 03/19] arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE   Valentin Longchamp
• [U-Boot] [PATCH v2 04/19] arm/km: use ARRAY_SIZE macro   Valentin Longchamp
• [U-Boot] [PATCH v2 05/19] arm/km: fix wrong comment in SDRAM config for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v2 06/19] arm/km: change maintainer for mgcoge3un   Valentin Longchamp
• [U-Boot] [PATCH v2 07/19] arm/km: remove CONFIG_RESET_PHY_R   Valentin Longchamp
• [U-Boot] [PATCH v2 08/19] arm/km: enable mii cmd   Valentin Longchamp
• [U-Boot] [PATCH v2 09/19] arm/km: use correct kw_gpio function for NAND/SPI switching   Valentin Longchamp
• [U-Boot] [PATCH v2 10/19] arm/km: implement weak function board_spi_clam_bus/release   Valentin Longchamp
• [U-Boot] [PATCH v2 11/19] arm/kirkwood: protect the ENV_SPI #defines   Valentin Longchamp
• [U-Boot] [PATCH v2 12/19] km/arm: remove spi toggle command   Valentin Longchamp
• [U-Boot] [PATCH v2 13/19] arm/km: add kmnusa board support   Valentin Longchamp
• [U-Boot] [PATCH v2 14/19] arm/km: add kmcoge5un board support   Valentin Longchamp
• [U-Boot] [PATCH v2 15/19] arm/km: convert mgcoge3un target to km_kirkwood   Valentin Longchamp
• [U-Boot] [PATCH v2 16/19] arm/km: remove portl2.h and use km_kirkwood instead   Valentin Longchamp
• [U-Boot] [PATCH v2 17/19] arm/km: correct init of 88e6352 switch in the reset_phy function   Valentin Longchamp
• [U-Boot] [PATCH v2 18/19] arm/km: enable BOCO2 FPGA download support   Valentin Longchamp
• [U-Boot] [PATCH v2 19/19] arm/km: cleanup km_kirkwood boards   Valentin Longchamp
• [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs   Amit Virdi
• [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs   Stefan Roese
• [U-Boot] [PATCH v2] MAKEALL: display SPL size if present   Anatolij Gustschin
• [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards   Amit Virdi
• [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support   Amit Virdi
• [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards   Stefan Roese
• [U-Boot] [PATCH] mmc: fsl_esdhc: Add workaround for auto-clock gate errata ENGcm03648   Dirk Behme
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Rob Herring
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Poll until card is not busy anymore   Dirk Behme
• [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Wolfgang Denk
• [U-Boot] [PATCH] ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement   Lukasz Majewski
• [U-Boot] [PATCH] mmc:fix: Set mmc width according to MMC host capabilities   Lukasz Majewski
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Jason Cooper
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings   Stefano Babic
• [U-Boot] BIOS EMULATOR driver   Viktor Křivák
• [U-Boot] BIOS EMULATOR driver   Anatolij Gustschin
• [U-Boot] [PATCH] powerpc/85xx: Add USB device-tree fixup for various platforms   Ramneek Mehresh
• [U-Boot] BIOS EMULATOR driver   Timur Tabi
• [U-Boot] [PATCH] cmd_nand: Fix possible uninited max_size variable   Scott Wood
• [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings   Eric Nelson
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Luka Perkov
• [U-Boot] Patchwork housekeeping   Vladimir Zapolskiy
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Patchwork housekeeping   Andy Fleming
• [U-Boot] Patchwork housekeeping   Vladimir Zapolskiy
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Luka Perkov
• [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible   Scott Wood
• [U-Boot] T4 U-boot: ctrl_regs.c: wr used uninitialized   Scott Wood
• [U-Boot] Please pull u-boot-ti/next   Tom Rini
• [U-Boot] T4 U-boot: ctrl_regs.c: wr used uninitialized   Scott Wood
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Jason Cooper
• [U-Boot] [PATCH] powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR   Timur Tabi
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/next   Tom Rini
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Jason
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] USB xHCI Support?   Aaron Williams
• [U-Boot] [PATCH] configs: EB+MCF-EV123.h: Fix typo on CONFIG_SYS_HUSH_PARSER   Fabio Estevam
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] [PATCH] cmd_nand: Fix possible uninited max_size variable   Marek Vasut
• [U-Boot] Patch: Fix device enumeration through API.   Tim Kientzle
• [U-Boot] Patch: Fix device enumeration through API.   Wolfgang Denk
• [U-Boot] BIOS EMULATOR driver   Viktor Křivák
• [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards   Amit Virdi
• [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb   Amit Virdi
• [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro   Amit Virdi
• [U-Boot] [PATCH v5] kirkwood: add NAS62x0 board support   Prafulla Wadaskar
• [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Amit Virdi
• [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION   Amit Virdi
• [U-Boot] [PATCH] ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement   Minkyu Kang
• [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Stefan Roese
• [U-Boot] [U-BOOT][PATCH] mmc: remove the hard setting for tran_speed   Jaehoon Chung
• [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5   Jaehoon Chung
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Prafulla Wadaskar
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Prafulla Wadaskar
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Amit Virdi
• [U-Boot] [GIT PULL] Update - Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 0/7] ColdFire: Clean up checkpatch warnings about volatile for ColdFire platform   Alison Wang
• [U-Boot] [PATCH 1/7] ColdFire: Add clear and set bits macros for ColdFire platform   Alison Wang
• [U-Boot] [PATCH 2/7] ColdFire: Clean up checkpatch warnings for MCF5227x   Alison Wang
• [U-Boot] [PATCH 3/7] ColdFire: Clean up checkpatch warnings for MCF52x2   Alison Wang
• [U-Boot] [PATCH 4/7] ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x   Alison Wang
• [U-Boot] [PATCH 5/7] ColdFire: Clean up checkpatch warnings for MCF523x   Alison Wang
• [U-Boot] [PATCH 6/7] ColdFire: Clean up checkpatch warnings for MCF547x and MCF548x   Alison Wang
• [U-Boot] [PATCH 7/7] ColdFire: Clean up checkpatch warnings for MCF54451 and MCF54455   Alison Wang
• [U-Boot] [RESEND PATCH] ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement   Lukasz Majewski
• [U-Boot] [PATCH 0/6] add zip command support for uboot   Lei Wen
• [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   Anatolij Gustschin
• [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   Anatolij Gustschin
• [U-Boot] [PATCHv5 2/7] mkenvimage: Correct an include and add a missing one   Anatolij Gustschin
• [U-Boot] [PATCHv5 3/7] mkenvimage: More error handling   Anatolij Gustschin
• [U-Boot] [PATCHv5 4/7] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   Anatolij Gustschin
• [U-Boot] [PATCHv5 5/7] mkenvimage: Use mmap() when reading from a regular file   Anatolij Gustschin
• [U-Boot] [PATCHv5 6/7] mkenvimage: Don't try to detect comments in the input file   Anatolij Gustschin
• [U-Boot] [PATCHv5 7/7] mkenvimage: Really set the redundant byte when applicable   Anatolij Gustschin
• [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet   Amit Virdi
• [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet   Stefan Roese
• [U-Boot] [PATCH] configs: EB+MCF-EV123.h: Fix typo on CONFIG_SYS_HUSH_PARSER   Anatolij Gustschin
• [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet   Amit Virdi
• [U-Boot] u-boot usb-ethernet patch   Pierre
• [U-Boot] please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [PATCH v2] disk/part.c: Fix device enumeration through API   Anatolij Gustschin
• [U-Boot] test mail   manjunatha
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH 2/2] SDHC/MMC: remove the member has_init   Chang-Ming.Huang at freescale.com
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Dirk Behme
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Prafulla Wadaskar
• [U-Boot] [PATCH] doc: Fix some typos in different files   Anatolij Gustschin
• [U-Boot] [PATCH] microblaze: Enable phylib and mii support   Michal Simek
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Marek Vasut
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Stefano Babic
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   manjunatha
• [U-Boot] [PATCH] net: smc91111: use mdelay()   Anatolij Gustschin
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Stefano Babic
• [U-Boot] [PATCH v2 00/19] updates for keymile arm boards   Valentin Longchamp
• [U-Boot] [PATCH] cmd_pxe.c: fix strict-aliasing warnings   Anatolij Gustschin
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Rob Herring
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Anatolij Gustschin
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Rob Herring
• [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot   Joe Hershberger
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Dirk Behme
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Anatolij Gustschin
• [U-Boot] [PATCH 7/9] Remove CONFIG_SYS_EXTBDINFO from snapper9260.h   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Stefano Babic
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Stefano Babic
• [U-Boot] BIOS EMULATOR driver   Wolfgang Denk
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] BIOS EMULATOR driver   Timur Tabi
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] BIOS EMULATOR driver   Timur Tabi
• [U-Boot] [PATCH 0/6] add zip command support for uboot   Tom Rini
• [U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache   Tom Rini
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Frank Svendsbøe
• [U-Boot] [PATCH V2] i.MX6: add enable_sata_clock()   Eric Nelson
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [GIT PULL] Update - Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung/master   Albert ARIBAUD
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] [ARM] Status for 2012.03   Albert ARIBAUD
• [U-Boot] [ARM] Status for 2012.03   Albert ARIBAUD
• [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   David Wagner
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Scott Wood
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Wolfgang Denk
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Tom Rini
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Scott Wood
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Marek Vasut
• [U-Boot] [PATCH V4 1/2] ext4fs ls load support   Graeme Russ
• [U-Boot] BIOS EMULATOR driver   Viktor Křivák
• [U-Boot] BIOS EMULATOR driver   Graeme Russ
• [U-Boot] [PATCH v2 00/10] Network stack checkpatch.pl compliance   Joe Hershberger
• [U-Boot] [PATCH v2 01/10] net: Remove volatile from net API   Joe Hershberger
• [U-Boot] [PATCH v2 02/10] net: cosmetic: net.h checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 03/10] net: cosmetic: net.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 04/10] net: cosmetic: eth.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 05/10] net: cosmetic: net.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 06/10] net: cosmetic: nfs.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 07/10] net: cosmetic: rarp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 08/10] net: cosmetic: sntp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 09/10] net: cosmetic: tftp.* checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 10/10] net: cosmetic: netconsole.c checkpatch compliance   Joe Hershberger
• [U-Boot] [PATCH v2 00/21] Network stack cosmetic improvements   Joe Hershberger
• [U-Boot] [PATCH v2 01/21] net: Remove CMD_PING where there's no CMD_NET   Joe Hershberger
• [U-Boot] [PATCH v2 02/21] net: Remove redefinitions of net.h functions   Joe Hershberger
• [U-Boot] [PATCH v2 03/21] net: Move MAC-seeded rand out of bootp.c   Joe Hershberger
• [U-Boot] [PATCH v2 04/21] net: Move CDP out of net.c   Joe Hershberger
• [U-Boot] [PATCH v2 05/21] net: Encapsulate CDP packet identification   Joe Hershberger
• [U-Boot] [PATCH v2 06/21] net: Move ARP out of net.c   Joe Hershberger
• [U-Boot] [PATCH v2 07/21] net: Move PING out of net.c   Joe Hershberger
• [U-Boot] [PATCH v2 08/21] net: Move RARP receive logic out of net.c   Joe Hershberger
• [U-Boot] [PATCH v2 09/21] net: cosmetic: Un-typedef IP_t   Joe Hershberger
• [U-Boot] [PATCH v2 10/21] net: cosmetic: Un-typedef Ethernet_t   Joe Hershberger
• [U-Boot] [PATCH v2 11/21] net: cosmetic: Un-typedef VLAN_Ethernet_t   Joe Hershberger
• [U-Boot] [PATCH v2 12/21] net: cosmetic: Un-typedef ARP_t   Joe Hershberger
• [U-Boot] [PATCH v2 13/21] net: cosmetic: Un-typedef ICMP_t   Joe Hershberger
• [U-Boot] [PATCH v2 14/21] net: cosmetic: Rename parameter len to payload_len   Joe Hershberger
• [U-Boot] [PATCH v2 15/21] net: cosmetic: Add a more explicit comment about 802.2   Joe Hershberger
• [U-Boot] [PATCH v2 16/21] net: cosmetic: Rename "x" to "eth_proto"   Joe Hershberger
• [U-Boot] [PATCH v2 17/21] net: cosmetic: Rename CDPHandler to CDPReceive   Joe Hershberger
• [U-Boot] [PATCH v2 18/21] net: cosmetic: Rename OPT_SIZE to OPT_FIELD_SIZE   Joe Hershberger
• [U-Boot] [PATCH v2 19/21] net: cosmetic: Alphabetize includes in net.c   Joe Hershberger
• [U-Boot] [PATCH v2 00/18] Network stack refactoring   Joe Hershberger
• [U-Boot] [PATCH v2 20/21] net: cosmetic: Rename tmp to reply_ip_addr in arp.c   Joe Hershberger
• [U-Boot] [PATCH v2 01/18] net: Refactor IP, UPD, and ICMP header writing functions   Joe Hershberger
• [U-Boot] [PATCH v2 21/21] net: cosmetic: Replace magic numbers in arp.c with constants   Joe Hershberger
• [U-Boot] [PATCH v2 02/18] net: Refactor NetSendUDPPacket to share more code   Joe Hershberger
• [U-Boot] [PATCH v2 03/18] net: Refactor packet length computations   Joe Hershberger
• [U-Boot] [PATCH v2 04/18] net: Refactor bootp packet length computations   Joe Hershberger
• [U-Boot] [PATCH v2 05/18] net: Move debug trace to point of action   Joe Hershberger
• [U-Boot] [PATCH v2 06/18] net: Refactor ping receive handler   Joe Hershberger
• [U-Boot] [PATCH v2 07/18] net: Refactor to use NetSendPacket instead of eth_send directly   Joe Hershberger
• [U-Boot] [PATCH v2 08/18] net: Refactor to protect access to the NetState variable   Joe Hershberger
• [U-Boot] [PATCH v2 09/18] net: Refactor to separate the UDP handler from the ARP handler   Joe Hershberger
• [U-Boot] [PATCH v2 10/18] net: Add NetUpdateEther() to handle ARP and Ping replies   Joe Hershberger
• [U-Boot] [PATCH v2 11/18] net: Don't write the "serverip" env var if configured not to   Joe Hershberger
• [U-Boot] [PATCH v2 12/18] net: Fix unused variable compile warning   Joe Hershberger
• [U-Boot] [PATCH v2 13/18] net: Add option CONFIG_BOOTP_MAY_FAIL   Joe Hershberger
• [U-Boot] [PATCH v2 14/18] net: Remove static allocation for MAC address in PingSend()   Joe Hershberger
• [U-Boot] [PATCH v2 15/18] net: Remove unused parameter from NetInitLoop()   Joe Hershberger
• [U-Boot] [PATCH v2 16/18] net: Fix net buffer initialization   Joe Hershberger
• [U-Boot] [PATCH v2 17/18] net: Make sure NetLoop is initialized when using NetConsole   Joe Hershberger
• [U-Boot] [PATCH v2 18/18] net: Don't copy every packet that waits for an ARP   Joe Hershberger
• [U-Boot] [PATCH v2 0/3] Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH v2 1/3] net: Separate ArpRequest() into lower-level func   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] net: Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH v2 3/3] net: Work-around for brain-damaged Cisco equipment with arp-proxy   Joe Hershberger
• [U-Boot] [PATCH v2] net: Allow filtering on debug traces in the net subsystem   Joe Hershberger
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] BIOS EMULATOR driver   Graeme Russ
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] BIOS EMULATOR driver   Graeme Russ
• [U-Boot] BIOS EMULATOR driver   Marek Vasut
• [U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02   Dave Purdy
• [U-Boot] [PATCH 0/6] add zip command support for uboot   Lei Wen
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Huang Changming-R66093
• [U-Boot] [PATCH] EXYNOS: Detect cpuid based on Exynos product codes   Minkyu Kang
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Huang Changming-R66093
• [U-Boot] [PATCH] TRATS: modify the trats's configuration   Jaehoon Chung
• [U-Boot] [PATCH v2 00/19] updates for keymile arm boards   Prafulla Wadaskar
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] FSL/eSDHC: enable the peripheral clock to detect the card   Stefano Babic
• [U-Boot] [PATCH] lzma: fix printf warnings   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Lukasz Majewski
• [U-Boot] [PATCH 2/3] misc:pmic:max8997 MAX8997 support for PMIC driver   Lukasz Majewski
• [U-Boot] [PATCH 3/3] misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998   Lukasz Majewski
• [U-Boot] [PATCH] board/ti/beagle/beagle.c: Fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/2] mx28: Split the README into a common part and a m28 specific part   Stefano Babic
• [U-Boot] [PATCH 2/2] mx28evk: Add a README file   Stefano Babic
• [U-Boot] [PATCH 3/3] misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998   Minkyu Kang
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Stefano Babic
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Lukasz Majewski
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Stefano Babic
• [U-Boot] [PATCH] Sheevaplug: Add Kirkwood watchdog support   Stathis Voukelatos
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Stefano Babic
• [U-Boot] [PATCH] nhk8815: fix build errors   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Fabio Estevam
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Lukasz Majewski
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Stefano Babic
• [U-Boot] [PATCH] nhk8815: fix build errors   Marek Vasut
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Fabio Estevam
• [U-Boot] [PATCH] drivers/mmc/tegra2_mmc.c: fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] MX53: DDR: Fix ZQHWCTRL field TZQ_CS   Stefano Babic
• [U-Boot] [PATCH] nhk8815: fix build errors   Alessandro Rubini
• [U-Boot] [PATCH] drivers/mtd/spr_smi.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH V2] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [PATCH] ext2load: increase read speed   Jason Cooper
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Stefano Babic
• [U-Boot] mixed case DATA lines in kwbimage.cfg, and other file : cosmetic?   David Purdy
• [U-Boot] [PATCH] board/vpac270/onenand.c: Fix build errors   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/mmc/tegra2_mmc.c: fix GCC 4.6 warning   Tom Warren
• [U-Boot] [PATCH 0/7] PXE parsing fixes and local file support   Rob Herring
• [U-Boot] [PATCH 1/7] menu: only timeout when menu is displayed   Rob Herring
• [U-Boot] [PATCH 2/7] pxe: support include files at top-level   Rob Herring
• [U-Boot] [PATCH 3/7] pxe: add support for label menu text   Rob Herring
• [U-Boot] [PATCH 4/7] pxe: support linux entries for labels   Rob Herring
• [U-Boot] [PATCH 5/7] pxe: support absolute paths   Rob Herring
• [U-Boot] [PATCH 6/7] pxe: parse initrd file from append string   Rob Herring
• [U-Boot] [PATCH 7/7] pxe: add support for parsing local syslinux files   Rob Herring
• [U-Boot] [PATCH] board/vpac270/onenand.c: Fix build errors   Marek Vasut
• [U-Boot] POLL: DEVELOPER's MEETING   Mike Frysinger
• [U-Boot] [PATCH 1/2] OMAP: Remove omap1610inn-based boards   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP: Move omap1510inn to Unmaintained / Orphaned   Tom Rini
• [U-Boot] [PATCH] board/ti/beagle/beagle.c: Fix build warnings   Tom Rini
• [U-Boot] [PATCH] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings   Tom Rini
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Frank Svendsbøe
• [U-Boot] Using qemu-system-ppc to boot U-Boot   Frank Svendsbøe
• [U-Boot] Any outstanding ARM pull requests?   Rob Herring
• [U-Boot] [PATCH] mx6qsabrelite: Fix the serial console port   Fabio Estevam
• [U-Boot] [PATCH 1/2] fdt: Avoid early panic() when there is no FDT present   Simon Glass
• [U-Boot] [PATCH 2/2] arm: Check for valid FDT after console is up   Simon Glass
• [U-Boot] [PATCH 1/2] fdt: Avoid early panic() when there is no FDT present   Tom Warren
• [U-Boot] [PATCH 2/2] arm: Check for valid FDT after console is up   Tom Warren
• [U-Boot] [PATCH 2/2] arm: Check for valid FDT after console is up   Simon Glass
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: Check for valid FDT after console is up   Stephen Warren
• [U-Boot] Any outstanding ARM pull requests?   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] arm: Check for valid FDT after console is up   Simon Glass
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 1/2] nand: extend .raw accesses to work on multiple pages   Scott Wood
• [U-Boot] [PATCH 2/2] nand: remote biterr command stub   Scott Wood
• [U-Boot] [PATCH 1/2 v2] FSL/eSDHC: enable the peripheral clock to detect the card   Chang-Ming.Huang at freescale.com
• [U-Boot] arithmetic operations on hush   Haneef Mohamed
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] nand: remote biterr command stub   Stefan Roese
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] arithmetic operations on hush   Wolfgang Denk
• [U-Boot] [PATCH 2/2] nand: remote biterr command stub   Wolfgang Denk
• [U-Boot] [PATCH 1/2] fdt: Avoid early panic() when there is no FDT present   Wolfgang Denk
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] [PATCH] drivers/mmc/mmc.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] misc:pmic: Support for voltage to register value conversion function   Lukasz Majewski
• [U-Boot] [PATCH 0/3] mmc: support sdhci instead of s5p_mmc   Jaehoon Chung
• [U-Boot] [PATCH 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Jaehoon Chung
• [U-Boot] Subject: [PATCH 2/3] mmc: use sdhci.c instead of s5p_mmc.c   Jaehoon Chung
• [U-Boot] [PATCH 3/3] ARM: SAMSUNG: support sdhci controller   Jaehoon Chung
• [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers   Donghwa Lee
• [U-Boot] [PATCH] drivers/mmc/mmc.c: Fix build warning   Marek Vasut
• [U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device   Lukasz Majewski
• [U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver   Lukasz Majewski
• [U-Boot] [PATCH v2 2/2] misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998   Lukasz Majewski
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH] mx6qsabrelite: Add boot switch setting information into the README   Fabio Estevam
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] POLL: DEVELOPER's MEETING   Wolfgang Denk
• [U-Boot] [STATUS] DEVELOPER's MEETING - Invitation   Wolfgang Denk
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH 0/3] mmc: support sdhci instead of s5p_mmc   Minkyu Kang
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Prafulla Wadaskar
• [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers   Minkyu Kang
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] Pull request: Please pull u-boot-coldfire/master   Jin Zhengxiong-R64188
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] [PATCH 1/2] fdt: Avoid early panic() when there is no FDT present   Simon Glass
• [U-Boot] [PATCH] powerpc/p1022ds: fix BR1/OR1 typo   Kim Phillips
• [U-Boot] [PATCH] powerpc/p1022ds: fix BR1/OR1 typo   Kim Phillips
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] Malloc: Fix -Wundef warnings   Marek Vasut
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Marek Vasut
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Marek Vasut
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers   Donghwa Lee
• [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers   Minkyu Kang
• [U-Boot] [PATCH 0/5] ARM: EXYNOS: add display driver for EXYNOS SoC   Donghwa Lee
• [U-Boot] [PATCH 1/5] ARM: EXYNOS: definition of system registers   Donghwa Lee
• [U-Boot] [PATCH 2/5]: ARM: EXYNOS: add data structure for EXYNOS display driver   Donghwa Lee
• [U-Boot] [PATCH 3/5] ARM: EXYNOS: add exynos lcd clock interface   Donghwa Lee
• [U-Boot] [PATCH 4/5] ARM: EXYNOS: support EXYNOS display driver   Donghwa Lee
• [U-Boot] [PATCH 5/5] ARM: EXYNOS: add Makefile for exynos display driver   Donghwa Lee
• [U-Boot] [PATCH 0/3] mmc: support sdhci instead of s5p_mmc   Jaehoon Chung
• [U-Boot] [PATCH v2 0/3] mmc: support sdhci instead of s5p_mmc   Jaehoon Chung
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Jaehoon Chung
• [U-Boot] [PATCH v2 2/3] mmc: use sdhci.c intead of s5p_mmc.c   Jaehoon Chung
• [U-Boot] [PATCH v2 3/3] ARM: SAMSUNG: support sdhci controller   Jaehoon Chung
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Lei Wen
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Jaehoon Chung
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Lei Wen
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH] i2c: Add support for designware i2c controller   Amit Virdi
• [U-Boot] [PATCH] i2c:designware Turn off the ctrl when setting the speed   Amit Virdi
• [U-Boot] [PATCH] st_smi: Fixed page size for Winbond W25Q128FV flash   Amit Virdi
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Jaehoon Chung
• [U-Boot] [ARM] Status for 2012.03   Albert ARIBAUD
• [U-Boot] standalone hello_world example crashes on PowerPC   Manukumar
• [U-Boot] [PATCH V2 00/24] SPEAr: Update platform support for SPEAr3xx/6xx   Amit Virdi
• [U-Boot] [PATCH V2 01/24] SPEAr: Fix ARM relocation support   Amit Virdi
• [U-Boot] [PATCH V2 02/24] SPEAr: Eliminate dependency on Xloader table   Amit Virdi
• [U-Boot] [PATCH V2 03/24] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET   Amit Virdi
• [U-Boot] [PATCH V2 04/24] SPEAr: Configure network support for spear SoCs   Amit Virdi
• [U-Boot] [PATCH V2 05/24] SPEAr: Add macb driver support for spear310 and spear320   Amit Virdi
• [U-Boot] [PATCH V2 06/24] SPEAr: Add interface information in initialization   Amit Virdi
• [U-Boot] [PATCH V2 07/24] SPEAr: Add basic arch related support for SPEAr SoCs   Amit Virdi
• [U-Boot] [PATCH V2 08/24] SPEAr: Add configuration options for spear3xx and spear6xx boards   Amit Virdi
• [U-Boot] [PATCH V2 09/24] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)   Amit Virdi
• [U-Boot] [PATCH V2 10/24] SPEAr: Change the default environment variables   Amit Virdi
• [U-Boot] [PATCH V2 11/24] SPEAr: Initialize SNOR in early_board_init_f   Amit Virdi
• [U-Boot] [PATCH V2 12/24] SPEAr: Enable usb device high speed support   Amit Virdi
• [U-Boot] [PATCH V2 13/24] SPEAr: Enable udc and usb-console support only for usbtty configuration   Amit Virdi
• [U-Boot] [PATCH V2 14/24] SPEAr: Enable autoneg for ethernet   Amit Virdi
• [U-Boot] [PATCH V2 15/24] SPEAr: Enable dcache for fast file transfer   Amit Virdi
• [U-Boot] [PATCH V2 16/24] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION   Amit Virdi
• [U-Boot] [PATCH V2 17/24] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE   Amit Virdi
• [U-Boot] [PATCH V2 18/24] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro   Amit Virdi
• [U-Boot] [PATCH V2 19/24] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb   Amit Virdi
• [U-Boot] [PATCH V2 20/24] SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access   Amit Virdi
• [U-Boot] [PATCH V2 21/24] SPEAr: explicitly select clk src for UART   Amit Virdi
• [U-Boot] [PATCH V2 22/24] SPEAr: Correct SoC ID offset in misc configuration space   Amit Virdi
• [U-Boot] [PATCH V2 23/24] cleanup/SPEAr: Remove unnecessary parenthesis   Amit Virdi
• [U-Boot] [PATCH V2 24/24] cleanup/SPEAr: Define configuration flags more elegantly   Amit Virdi
• [U-Boot] [ARM] Status for 2012.03   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH 4/5] ARM: EXYNOS: support EXYNOS display driver   Minkyu Kang
• [U-Boot] [PATCH 5/5] ARM: EXYNOS: add Makefile for exynos display driver   Minkyu Kang
• [U-Boot] [PATCH 3/5] ARM: EXYNOS: add exynos lcd clock interface   Minkyu Kang
• [U-Boot] [PATCH 2/5]: ARM: EXYNOS: add data structure for EXYNOS display driver   Minkyu Kang
• [U-Boot] BDI2000 config file for mx35pdk   Gabriel Tisan
• [U-Boot] BDI2000 config file for mx35pdk   Stefano Babic
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Prafulla Wadaskar
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Valentin Longchamp
• [U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release   Prafulla Wadaskar
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Gerlando Falauto
• [U-Boot] [PATCH v2 2/3] mmc: use sdhci.c intead of s5p_mmc.c   Minkyu Kang
• [U-Boot] [PATCH v2 3/3] ARM: SAMSUNG: support sdhci controller   Minkyu Kang
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Marek Vasut
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Marek Vasut
• [U-Boot] [ARM] Status for 2012.03   Simon Glass
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Gerlando Falauto
• [U-Boot] [PATCH] post: remove #warning for kirkwood CPUs   Valentin Longchamp
• [U-Boot] [ARM] Status for 2012.03   Valentin Longchamp
• [U-Boot] [ARM] Status for 2012.03   Marek Vasut
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Marek Vasut
• [U-Boot] [ARM] Status for 2012.03   Simon Glass
• [U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH] km_arm: use filesize for erase in update command   Valentin Longchamp
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Stefano Babic
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Marek Vasut
• [U-Boot] [ARM] Status for 2012.03   Marek Vasut
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Anatolij Gustschin
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Stefano Babic
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Marek Vasut
• [U-Boot] ext2 file system performance   Jason
• [U-Boot] zImage and raw ramdisk support -- test   Marek Vasut
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Anatolij Gustschin
• [U-Boot] [PATCH] mx28evk: fix build error   Anatolij Gustschin
• [U-Boot] [PATCH] mx28evk: fix build error   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Lei Wen
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Stefano Babic
• [U-Boot] Please pull u-boot-sh/master   Wolfgang Denk
• [U-Boot] Pull request - microblaze   Wolfgang Denk
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Marek Vasut
• [U-Boot] [PATCH] mx6qsabrelite: Fix the serial console port   Fabio Estevam
• [U-Boot] [PATCH] ARM1136: add cache flush and invalidate operations   Stefano Babic
• [U-Boot] [PATCH] post: remove #warning for kirkwood CPUs   Wolfgang Denk
• [U-Boot] ext2 file system performance   jonsmirl at gmail.com
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] [PATCH v2] OMAP: Move omap1510inn to Unmaintained / Orphaned   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Wolfgang Denk
• [U-Boot] [PATCH v2 02/20] i2c: Add TPS6586X driver   Simon Glass
• [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support   Simon Glass
• [U-Boot] zImage and raw ramdisk support -- test   Robert Nelson
• [U-Boot] [PATCH] drivers/mmc/tegra2_mmc.c: fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH] drivers/mmc/mmc.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] zImage and raw ramdisk support -- test   Marek Vasut
• [U-Boot] [PATCH] command, log: print with "log show" a full logbuffer   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] cosmetic: command, log: Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH 2/2] command, log: print log->v2.con value in the "log info" command   Wolfgang Denk
• [U-Boot] Pull request: u-boot-nios/master   Anatolij Gustschin
• [U-Boot] [PATCH V4] MAKEALL: Add -m/-M option to determine maintainers   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Add support for loading and saving the environment to a FAT partition   Wolfgang Denk
• [U-Boot] [PATCH 1/2] pci: get rid of local prototypes   Wolfgang Denk
• [U-Boot] [PATCH 2/2] pci: declare pciauto functions in header   Wolfgang Denk
• [U-Boot] [PATCH V4] MAKEALL: Add -m/-M option to determine maintainers   Marek Vasut
• [U-Boot] [PATCH 2/2] pci: declare pciauto functions in header   Wolfgang Denk
• [U-Boot] [PATCH] mx28evk: fix build error   Wolfgang Denk
• [U-Boot] [U-boot][INQUIRY] Intel 82599 10Gbe ethernet driver   Timothy Smyth
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Wolfgang Denk
• [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support   Tom Warren
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] [PATCH v2 0/3] Enable access to FAT filesystem in an ISO9660 El-Torito volume   Wolfgang Denk
• [U-Boot] [PATCH] BOOT: Add RAW ramdisk support to bootz   Wolfgang Denk
• [U-Boot] [PATCH] RAMDISK: Fix unused variable issue caused by raw rd support   Marek Vasut
• [U-Boot] [PATCH] RAMDISK: Fix unused variable issue caused by raw rd support   Marek Vasut
• [U-Boot] zImage and raw ramdisk support -- test   Wolfgang Denk
• [U-Boot] [PATCH] RAMDISK: Fix unused variable issue caused by raw rd support   Wolfgang Denk
• [U-Boot] [PATCH] RAMDISK: Fix unused variable issue caused by raw rd support   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Wolfgang Denk
• [U-Boot] [PATCH 1/3] net/ethoc: use flush_dcache_range instead of flush_dcache   Wolfgang Denk
• [U-Boot] [PATCH 2/3] net/altera_tse: use flush_dcache_range instead of flush_dcache   Wolfgang Denk
• [U-Boot] Pull request: u-boot-nios/master   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [STATUS] v2012.04-rc1 is out   Wolfgang Denk
• [U-Boot] How to distinguish between the Linux kernel version above 3.0   徐阳
• [U-Boot] How to distinguish between the Linux kernel version above 3.0   Mike Frysinger
• [U-Boot] [PATCH] Malloc: Fix -Wundef warnings   Mike Frysinger
• [U-Boot] How to distinguish between the Linux kernel version above 3.0   James W.
• [U-Boot] [STATUS] v2012.04-rc1 is out   Dirk Behme
• [U-Boot] patchwork: clean up various patches   Dirk Behme
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Jae hoon Chung
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH v2] main: unify command parsing functions   Simon Glass
• [U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH v3 2/4] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH v3 3/4] sandbox: Use the new run_command()   Simon Glass
• [U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution   Simon Glass
• [U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules   Gachet Daniel
• [U-Boot] A few things for the release?   Simon Glass
• [U-Boot] [PATCH v2 01/10] net: Remove volatile from net API   Simon Glass
• [U-Boot] [PATCH v2 02/10] net: cosmetic: net.h checkpatch compliance   Simon Glass
• [U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled   Simon Glass
• [U-Boot] [ARM] Status for 2012.03   Simon Glass
• [U-Boot] [STATUS] v2012.04-rc1 is out   Jens Scharsig
• [U-Boot] [PATCH 0/5 v3] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH 1/5] lib: add rand() function   Michael Walle
• [U-Boot] [PATCH 2/5] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH 3/5] net: add eth_setenv_enetaddr_by_index()   Michael Walle
• [U-Boot] [PATCH 4/5] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
• [U-Boot] [PATCH 5/5] Kirkwood: automatically build kwb image for lsxl   Michael Walle
• [U-Boot] [PATCH v2 1/3] mmc: sdhci: fix the wrong operation when response type is R1b   Lei Wen
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Marek Vasut
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Anatolij Gustschin
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Anatolij Gustschin
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Marek Vasut
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Simon Glass
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Marek Vasut
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Simon Glass
• [U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012   Marek Vasut
• [U-Boot] [PATCH V2] Block: Remove MG DISK support   Marek Vasut
• [U-Boot] [PATCH 01/14] AT91: Drop AT91_SPIMUX command from cmd_all   Marek Vasut
• [U-Boot] [PATCH 02/14] CMD: Remove CMD_AUTOSCRIPT, it's not used   Marek Vasut
• [U-Boot] [PATCH 03/14] CMD: Drop CMD_CAN, it's not used   Marek Vasut
• [U-Boot] [PATCH 04/14] CMD: Drop CMD_DCR, it's not used   Marek Vasut
• [U-Boot] [PATCH 05/14] CMD: Drop CONFIG_CMD_DFL, it's not used   Marek Vasut
• [U-Boot] [PATCH 06/14] CMD: Drop CONFIG_CMD_EMMC, it's not used   Marek Vasut
• [U-Boot] [PATCH 07/14] CMD: Fix typo KGBD -> KGDB on debris board   Marek Vasut
• [U-Boot] [PATCH 08/14] CMD: Remove CMD_LOG, it's unused   Marek Vasut
• [U-Boot] [PATCH 09/14] HWW1U1A: Fix CMD_SHA1 -> CMD_SHA1SUM   Marek Vasut
• [U-Boot] [PATCH 10/14] CMD: Remove CMD_MEM and CMD_LOOPW, they're unused   Marek Vasut
• [U-Boot] [PATCH 11/14] CMD: Fix typo CMD_FSL -> CMD_MFSL in readme   Marek Vasut
• [U-Boot] [PATCH 12/14] CMD: Fix CONFIG_CMD_SAVEBP_WRITE_SIZE -> CONFIG_CMD_SPL_WRITE_SIZE   Marek Vasut
• [U-Boot] [PATCH 13/14] CMD: CONFIG_CMD_SETECPR -> CONFIG_CMD_SETEXPR on omap3_logic   Marek Vasut
• [U-Boot] [PATCH 14/14] CMD: Fix CONFIG_CMD_STORAGE -> CONFIG_CMD_USB_STORAGE   Marek Vasut
• [U-Boot] [PATCH V2 12/24] SPEAr: Enable usb device high speed support   Marek Vasut
• [U-Boot] [STATUS] v2012.04-rc1 is out   Marek Vasut
• [U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules   Marek Vasut
• [U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled   Marek Vasut
• [U-Boot] [U-boot][INQUIRY] Intel 82599 10Gbe ethernet driver   Marek Vasut
• [U-Boot] [PATCH v2] OMAP: Move omap1510inn to Unmaintained / Orphaned   Marek Vasut
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Mike Frysinger
• [U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM   Marek Vasut
• [U-Boot] [PATCH] Honor /memory/reg node in DTB files   Marek Vasut
• [U-Boot] [PATCH] MIPS: Add initial support for EMMA3SL/LP   Marek Vasut
• [U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.   Marek Vasut
• [U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET.   Marek Vasut
• [U-Boot] [PATCH] Prevent malloc with size 0   Marek Vasut
• [U-Boot] [PATCH 01/14] AT91: Drop AT91_SPIMUX command from cmd_all   Anatolij Gustschin
• [U-Boot] [PATCH 02/14] CMD: Remove CMD_AUTOSCRIPT, it's not used   Anatolij Gustschin
• [U-Boot] [PATCH 04/14] CMD: Drop CMD_DCR, it's not used   Anatolij Gustschin
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Marek Vasut
• [U-Boot] [PATCH 04/14] CMD: Drop CMD_DCR, it's not used   Marek Vasut
• [U-Boot] [PATCH 05/14] CMD: Drop CONFIG_CMD_DFL, it's not used   Anatolij Gustschin
• [U-Boot] [PATCH v2] configs: EB+MCF-EV123.h: Fix typo on CONFIG_SYS_HUSH_PARSER   Fabio Estevam
• [U-Boot] [PATCH 00/11] MIPS: fixes and updates   Marek Vasut
• [U-Boot] [PATCH 10/11] MIPS: add init hook for CPU specific initialization   Marek Vasut
• [U-Boot] [PATCH] MIPS: fix endianess handling   Marek Vasut
• [U-Boot] [PATCH 10/14] CMD: Remove CMD_MEM and CMD_LOOPW, they're unused   Anatolij Gustschin
• [U-Boot] [PATCH 07/14] CMD: Fix typo KGBD -> KGDB on debris board   Anatolij Gustschin
• [U-Boot] [PATCH 09/14] HWW1U1A: Fix CMD_SHA1 -> CMD_SHA1SUM   Anatolij Gustschin
• [U-Boot] [PATCH 08/14] CMD: Remove CMD_LOG, it's unused   Anatolij Gustschin
• [U-Boot] [PATCH 11/14] CMD: Fix typo CMD_FSL -> CMD_MFSL in readme   Anatolij Gustschin
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH 13/14] CMD: CONFIG_CMD_SETECPR -> CONFIG_CMD_SETEXPR on omap3_logic   Anatolij Gustschin
• [U-Boot] [PATCH 07/14] CMD: Fix typo KGBD -> KGDB on debris board   Marek Vasut
• [U-Boot] [PATCH 10/14] CMD: Remove CMD_MEM and CMD_LOOPW, they're unused   Marek Vasut
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Marek Vasut