[U-Boot] [PATCH 4/5] mx53loco: Allow to print CPU information at a later stage

[Fabio Estevam]

Print CPU information within board_late_init().

This is in preparation for adding 1GHz support, which requires programming a PMIC
via I2C. As I2C is only available after relocation, print the CPU information
later at board_late_init(), so that the CPU frequency can be printed correctly.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/armv7/imx-common/cpu.c       |    2 +-
 arch/arm/include/asm/arch-mx5/sys_proto.h |    2 +-
 board/freescale/mx53loco/mx53loco.c       |   22 ++++++++++++++++++++++
 include/configs/mx53loco.h                |    1 -
 4 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c
index 62b01e7..56db462 100644
--- a/arch/arm/cpu/armv7/imx-common/cpu.c
+++ b/arch/arm/cpu/armv7/imx-common/cpu.c
@@ -35,7 +35,7 @@
 #include <fsl_esdhc.h>
 #endif
 
-static char *get_reset_cause(void)
+char *get_reset_cause(void)
 {
 	u32 cause;
 	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h
index 7250059..36dfe02 100644
--- a/arch/arm/include/asm/arch-mx5/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx5/sys_proto.h
@@ -36,5 +36,5 @@ void set_chipselect_size(int const);
 
 int fecmxc_initialize(bd_t *bis);
 u32 get_ahb_clk(void);
-
+char *get_reset_cause(void);
 #endif
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index d736141..64f5b07 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -298,6 +298,28 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int print_cpuinfo(void)
+{
+	u32 cpurev;
+
+	cpurev = get_cpu_rev();
+	printf("CPU:   Freescale i.MX%x family rev%d.%d at %d MHz\n",
+		(cpurev & 0xFF000) >> 12,
+		(cpurev & 0x000F0) >> 4,
+		(cpurev & 0x0000F) >> 0,
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	print_cpuinfo();
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 34a4edd..eaba0bb 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -27,7 +27,6 @@
 
 #define CONFIG_SYS_MX5_HCLK	24000000
 #define CONFIG_SYS_MX5_CLK32		32768
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX53_LOCO
-- 
1.7.1