[U-Boot] [PATCH 3/5] ARM: EXYNOS: add exynos lcd clock interface

[Donghwa Lee]

To get lcd source clock in EXYNOS display driver, added get_lcd_clk() interface.

Signed-off-by: Donghwa Lee <dh09.lee at samsung.com>
Signed-off-by: Inki Dae <inki.dae at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/cpu/armv7/exynos/clock.c |   50 +++++++++++++++++++++++++++++++++++++
 1 files changed, 50 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 2f7048b..af66d5c 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -414,6 +414,51 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
 	writel(val, addr);
 }
 
+/* get_lcd_clk: return lcd clock frequency */
+static unsigned long exynos4_get_lcd_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_LCD0
+	 * FIMD0_SEL [3:0]
+	 */
+#if defined(CONFIG_EXYNOS4210)
+	sel = readl(&clk->src_lcd0);
+#else
+	sel = readl(&clk->src_lcd);
+#endif
+	sel = sel & 0xf;
+
+	if (sel == 0x6)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x8)
+		sclk = get_pll_clk(VPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_LCD0
+	 * FIMD0_RATIO [3:0]
+	 */
+#if defined(CONFIG_EXYNOS4210)
+	ratio = readl(&clk->div_lcd0);
+#else
+	ratio = readl(&clk->div_lcd);
+#endif
+	ratio = ratio & 0xf;
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
 unsigned long get_pll_clk(int pllreg)
 {
 	if (cpu_is_exynos5())
@@ -453,3 +498,8 @@ void set_mmc_clk(int dev_index, unsigned int div)
 	else
 		exynos4_set_mmc_clk(dev_index, div);
 }
+
+unsigned long get_lcd_clk(void)
+{
+	return exynos4_get_lcd_clk();
+}
-- 
1.7.4.1