[U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"

[Thomas Weber]

Hello Tom,

will you take this patch? Or should we add the CONFIG_MTD_ECC_SOFT to 
the boards?

Regards,
Thomas

On 02/13/2012 10:55 PM, Scott Wood wrote:
> This reverts commit 4fee6c2f295f932b8febdc7ce8731ba045695fa5.
>
> It breaks boards that currently rely on soft-ecc, as pointed out here:
> http://patchwork.ozlabs.org/patch/140872/
>
> The reverted patch should be resubmitted with documentation, and with the
> CONFIG_MTD_ECC_SOFT selected from every board that needs it.  We could
> start by looking at what NAND driver the board selects, and whether
> that driver ever asks for soft ECC.
>
> Signed-off-by: Scott Wood<scottwood at freescale.com>
> ---
>   drivers/mtd/nand/Makefile    |    2 +-
>   drivers/mtd/nand/nand_base.c |    4 ----
>   include/linux/mtd/nand_ecc.h |   25 -------------------------
>   3 files changed, 1 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 998fc73..1d1b628 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -39,7 +39,7 @@ COBJS-y += nand_bbt.o
>   COBJS-y += nand_ids.o
>   COBJS-y += nand_util.o
>   endif
> -COBJS-$(CONFIG_MTD_ECC_SOFT) += nand_ecc.o
> +COBJS-y += nand_ecc.o
>   COBJS-y += nand_base.o
>   COBJS-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 12b960f..8ab8303 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -3028,10 +3028,6 @@ int nand_scan_tail(struct mtd_info *mtd)
>   		chip->ecc.mode = NAND_ECC_SOFT;
>
>   	case NAND_ECC_SOFT:
> -		if (!mtd_nand_has_ecc_soft()) {
> -			printk(KERN_WARNING "CONFIG_MTD_ECC_SOFT not enabled\n");
> -			return -EINVAL;
> -		}
>   		chip->ecc.calculate = nand_calculate_ecc;
>   		chip->ecc.correct = nand_correct_data;
>   		chip->ecc.read_page = nand_read_page_swecc;
> diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
> index 9715a53..090da50 100644
> --- a/include/linux/mtd/nand_ecc.h
> +++ b/include/linux/mtd/nand_ecc.h
> @@ -15,10 +15,6 @@
>
>   struct mtd_info;
>
> -#if defined(CONFIG_MTD_ECC_SOFT)
> -
> -static inline int mtd_nand_has_ecc_soft(void) { return 1; }
> -
>   /*
>    * Calculate 3 byte ECC code for 256 byte block
>    */
> @@ -29,25 +25,4 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code
>    */
>   int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
>
> -#else
> -
> -static inline int mtd_nand_has_ecc_soft(void) { return 0; }
> -
> -static inline int
> -nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
> -{
> -	return -1;
> -}
> -
> -static inline int
> -nand_correct_data(struct mtd_info *mtd,
> -			u_char *dat,
> -			u_char *read_ecc,
> -			u_char *calc_ecc)
> -{
> -	return -1;
> -}
> -
> -#endif
> -
>   #endif /* __MTD_NAND_ECC_H__ */