[U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs

[Minkyu Kang]

Dear Doug Anderson,

On 20 February 2012 16:06, Chander Kashyap <chander.kashyap at linaro.org> wrote:
> On 13 February 2012 23:08, Doug Anderson <dianders at chromium.org> wrote:
>> This properly configures the mux to enable all UARTs.
>>
>> This also fixes things so that we don't configure balls XUCTSN_1 and
>> XURTSN_1 as UART1 configuration (RTS/CTS), since they aren't
>> connected.
>>
>> Signed-off-by: Doug Anderson <dianders at chromium.org>
>> ---
>> Changes in v2:
>> - Removed #ifdefs and tested SERIAL_MULTI by setting stdin/out/err to
>> s5pserN and validating that serial moved.
>>
>>  board/samsung/smdk5250/smdk5250.c |   44 +++++++++++++++++++++++++++++++++++-
>>  1 files changed, 42 insertions(+), 2 deletions(-)
>>

applied to u-boot-samsung.

Thanks,
Minkyu Kang.
-- 
from. prom.
www.promsoft.net