[U-Boot] Please pull u-boot-ti/master

[Albert ARIBAUD]

Hi Tom,

Le 26/03/2012 19:36, Tom Rini a écrit :
> On Mon, Mar 19, 2012 at 11:29:06AM -0700, Tom Rini wrote:
>> Hello,
>>
>> The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>    Marek Vasut (1):
>>          IXP: Fix GPIO_INT_ACT_LOW_SET()
> [snip]
>
> This pull request is now updated as such:
>
> The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>    Marek Vasut (1):
>          IXP: Fix GPIO_INT_ACT_LOW_SET()
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti master
>
> Christian Riesch (1):
>        calimain, enbw_cmc: Fix typo in comments
>
> Grazvydas Ignotas (1):
>        twl4030: fix potential power supply handling issues
>
> Simon Schwarz (8):
>        Add cmd_spl command
>        devkit8000: add config for spl command
>        omap-common: Add NAND SPL linux booting
>        devkit8000/spl: init GPMC for dm9000 in SPL
>        omap-common/spl: Add linux boot to SPL
>        omap/spl: change output of spl_parse_image_header
>        devkit8000: Implement and activate direct OS boot
>        arm: Add Prep subcommand support to bootm
>
> Stefano Babic (8):
>        Add cache functions to SPL for armv7
>        OMAP3: SPL: do not call I2C init if no I2C is set.
>        SPL: call cleanup_before_linux() before booting Linux
>        OMAP3: twister: add support to boot Linux from SPL
>        NAND: TI: fix warnings in omap_gpmc.c
>        OMAP3: mt_ventoux: updated timing for FPGA
>        OMAP3: mt_ventoux: sets its own mtdparts
>        Davinci: ea20: use gpio framework to access gpios
>
> Tom Rini (1):
>        cam_enc_4xx: Rename 'images' to 'imgs'
>
> jacopo mondi (1):
>        omap3_spi: receive transmit mode
>
>   arch/arm/cpu/armv7/Makefile               |    2 -
>   arch/arm/cpu/armv7/cpu.c                  |    2 +
>   arch/arm/cpu/armv7/omap-common/spl.c      |   46 ++++-
>   arch/arm/cpu/armv7/omap-common/spl_nand.c |   47 ++++-
>   arch/arm/cpu/armv7/omap3/board.c          |    2 +
>   arch/arm/include/asm/bootm.h              |   26 +++
>   arch/arm/include/asm/omap_common.h        |    2 +
>   arch/arm/lib/Makefile                     |    5 +-
>   arch/arm/lib/bootm.c                      |  341 +++++++++++++++--------------
>   board/ait/cam_enc_4xx/cam_enc_4xx.c       |   48 ++--
>   board/davinci/ea20/ea20.c                 |   38 +---
>   board/enbw/enbw_cmc/enbw_cmc.c            |    2 +-
>   board/omicron/calimain/calimain.c         |    2 +-
>   board/technexion/twister/twister.c        |   23 ++
>   board/teejet/mt_ventoux/mt_ventoux.h      |   11 +-
>   board/timll/devkit8000/devkit8000.c       |   37 +++
>   common/Makefile                           |    1 +
>   common/cmd_spl.c                          |  188 ++++++++++++++++
>   doc/README.commands.spl                   |   31 +++
>   drivers/mtd/nand/omap_gpmc.c              |   14 +-
>   drivers/power/twl4030.c                   |   18 ++-
>   drivers/spi/omap3_spi.c                   |   66 ++++++-
>   drivers/spi/omap3_spi.h                   |    2 +
>   include/cmd_spl.h                         |   31 +++
>   include/configs/devkit8000.h              |   15 +-
>   include/configs/ea20.h                    |    2 +
>   include/configs/mt_ventoux.h              |   10 +
>   include/configs/twister.h                 |   12 +
>   include/image.h                           |    2 +
>   29 files changed, 777 insertions(+), 249 deletions(-)
>   create mode 100644 arch/arm/include/asm/bootm.h
>   create mode 100644 common/cmd_spl.c
>   create mode 100644 doc/README.commands.spl
>   create mode 100644 include/cmd_spl.h

Applied to u-boot-arm/master, thanks.

Amicalement,
-- 
Albert.