[U-Boot] [RESEND] ca9x4_ct_vxp build error

[Matt Waddel]

Hi Marek,

Your message wasn't ignored, you must have missed my response.

There have been 2 patches submitted to fix this problem. They are
virtually identical:

http://lists.denx.de/pipermail/u-boot/2012-March/119558.html
http://lists.denx.de/pipermail/u-boot/2012-February/118511.html

Either one will work, I Acked the 2nd one since it was submitted
first:

http://lists.denx.de/pipermail/u-boot/2012-March/119997.html

Best regards,
Matt

On 03/20/2012 03:11 PM, Marek Vasut wrote:
> As my previous remark about this board not building was ignored, I'm resending 
> it one more time. I'll do one more resend of this note and if noone fixes this 
> I'll submit a removal patch.
> 
> $ CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm ./MAKEALL ca9x4_ct_vxp
> Configuring for ca9x4_ct_vxp board...
> common/libcommon.o: In function `cread_line':
> /home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to 
> `get_ticks'
> /home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to 
> `get_tbclk'
> /home/marex/U-Boot/u-boot-marex/common/main.c:698: undefined reference to 
> `get_ticks'
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail 
> ../../bfd/elf32-arm.c:7498
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail 
> ../../bfd/elf32-arm.c:7498
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail 
> ../../bfd/elf32-arm.c:13830
> /bin/sh: line 1: 11250 Segmentation fault      arm-linux-gnueabi-ld -pie -T u-
> boot.lds -Bstatic -Ttext 0x60800000 $UNDEF_SYM arch/arm/cpu/armv7/start.o --
> start-group api/libapi.o arch/arm/cpu/armv7/libarmv7.o arch/arm/lib/libarm.o 
> common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o 
> drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o 
> drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o 
> drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o 
> drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o 
> drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o 
> drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o 
> drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o 
> drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o 
> drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o 
> drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o 
> drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o 
> drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o 
> fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o 
> fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o 
> lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o 
> board/armltd/vexpress/libvexpress.o --end-group /home/marex/U-Boot/u-boot-
> marex/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabi/4.4.6 -lgcc -
> Map u-boot.map -o u-boot
> make: *** [u-boot] Error 139
> arm-linux-gnueabi-size: ./u-boot: File format not recognized
> 
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with warnings or errors: 1 ( ca9x4_ct_vxp )
> ----------------------------------------------------------


-- 
Linaro.org │ Open source software for ARM SoCs
Follow Linaro:
http://www.facebook.com/pages/Linaro/155974581091106
http://twitter.com/#!/linaroorg
http://www.linaro.org/linaro-blog/