[U-Boot] [RESEND] ca9x4_ct_vxp build error

[Marek Vasut]

Dear Matt Waddel,

> Hi Marek,
> 
> Your message wasn't ignored, you must have missed my response.
> 
> There have been 2 patches submitted to fix this problem. They are
> virtually identical:
> 
> http://lists.denx.de/pipermail/u-boot/2012-March/119558.html
> http://lists.denx.de/pipermail/u-boot/2012-February/118511.html
> 
> Either one will work, I Acked the 2nd one since it was submitted
> first:
> 
> http://lists.denx.de/pipermail/u-boot/2012-March/119997.html

Accept my apology for missing your response!

CCing Albert, add my:

Acked-by: Marek Vasut <marek.vasut at gmail.com>

to the second patch please.

> 
> Best regards,
> Matt
> 
> On 03/20/2012 03:11 PM, Marek Vasut wrote:
> > As my previous remark about this board not building was ignored, I'm
> > resending it one more time. I'll do one more resend of this note and if
> > noone fixes this I'll submit a removal patch.
> > 
> > $ CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm ./MAKEALL ca9x4_ct_vxp
> > Configuring for ca9x4_ct_vxp board...
> > common/libcommon.o: In function `cread_line':
> > /home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to
> > `get_ticks'
> > /home/marex/U-Boot/u-boot-marex/common/main.c:695: undefined reference to
> > `get_tbclk'
> > /home/marex/U-Boot/u-boot-marex/common/main.c:698: undefined reference to
> > `get_ticks'
> > arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
> > ../../bfd/elf32-arm.c:7498
> > arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
> > ../../bfd/elf32-arm.c:7498
> > arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian) 2.22 assertion fail
> > ../../bfd/elf32-arm.c:13830
> > /bin/sh: line 1: 11250 Segmentation fault      arm-linux-gnueabi-ld -pie
> > -T u- boot.lds -Bstatic -Ttext 0x60800000 $UNDEF_SYM
> > arch/arm/cpu/armv7/start.o -- start-group api/libapi.o
> > arch/arm/cpu/armv7/libarmv7.o arch/arm/lib/libarm.o common/libcommon.o
> > disk/libdisk.o drivers/bios_emulator/libatibiosemu.o
> > drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o
> > drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o
> > drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o
> > drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o
> > drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o
> > drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o
> > drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o
> > drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o
> > drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
> > drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
> > drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o
> > drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o
> > drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o
> > fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o
> > fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o
> > lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o
> > lib/zlib/libz.o net/libnet.o post/libpost.o
> > board/armltd/vexpress/libvexpress.o --end-group
> > /home/marex/U-Boot/u-boot- marex/arch/arm/lib/eabi_compat.o -L
> > /usr/lib/gcc/arm-linux-gnueabi/4.4.6 -lgcc - Map u-boot.map -o u-boot
> > make: *** [u-boot] Error 139
> > arm-linux-gnueabi-size: ./u-boot: File format not recognized
> > 
> > --------------------- SUMMARY ----------------------------
> > Boards compiled: 1
> > Boards with warnings or errors: 1 ( ca9x4_ct_vxp )
> > ----------------------------------------------------------

Best regards,
Marek Vasut