[U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC

[Lukasz Majewski]

On Wed, 07 Mar 2012 15:09:36 +0530
Amit Virdi <amit.virdi at st.com> wrote:

> Support for designware USB device controller (UDC) exists in the
> u-boot for SPEAr platform. This patchset makes the driver more
> generic so that it can be used across multiple platforms.
> 
> V2:
>  - Configure the gadget in HS only if CONFIG_USBD_HS is defined
>  - Made local functions static in a separate commit
>  - In "Fix memory nonalignment issue" used memcpy instead of copying
>    byte-by-byte
>  - Define the HS_PACKET_SIZE unconditionally
> 
> V1:
>  - Added support for designware UDC in a more generic way
> 
> Amit Virdi (1):
>   USB:gadget:designware Make locally used functions static
> 
> Shiraz Hashim (1):
>   USB:gadget:designware Fix memory nonalignment issue
> 
> Vipin KUMAR (3):
>   USB:gadget:designware USB device controller (UDC) implementation
>   USB:gadget:designware Device controller bugfixes
>   USB:gadget:designware Support high speed
> 
>  drivers/serial/usbtty.h                            |    4 +-
>  drivers/usb/gadget/Makefile                        |    2 +-
>  drivers/usb/gadget/{spr_udc.c => designware_udc.c} |  138
> ++++++++++++-------
> include/configs/spear-common.h                     |    4 +-
> include/usb/{spr_udc.h => designware_udc.h}        |    7 +- 5 files
> changed, 97 insertions(+), 58 deletions(-) rename
> drivers/usb/gadget/{spr_udc.c => designware_udc.c} (89%) rename
> include/usb/{spr_udc.h => designware_udc.h} (98%)
> 

Hi Amit,

Is this driver a Synopsis DWC2 or DWC3 UDC controller?

-- 
Best regards,

Lukasz Majewski

Samsung Poland R&D Center
Platform Group