[U-Boot] [PATCH V14 04/13] devkit8000/spl: init GPMC for dm9000 in SPL

[Stefano Babic]

From: Simon Schwarz <simonschwarzcor at googlemail.com>

Linux crashes if the GPMC isn't configured for the dm9000.

Signed-off-by: Simon Schwarz <simonschwarzcor at gmail.com>
CC: Tom Rini <tom.rini at gmail.com>
CC: Stefano Babic <sbabic at denx.de>
CC: Wolfgang Denk <wd at denx.de>
---
 arch/arm/include/asm/omap_common.h  |    1 +
 board/timll/devkit8000/devkit8000.c |   19 +++++++++++++++++++
 2 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 25f95b4..85eac7d 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -92,6 +92,7 @@ u32 omap_boot_mode(void);
 /* SPL common function s*/
 void spl_parse_image_header(const struct image_header *header);
 void omap_rev_string(void);
+void spl_board_prepare_for_linux(void);
 
 /* NAND SPL functions */
 void spl_nand_load_image(void);
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 10f189e..dded697 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -73,6 +73,13 @@ int board_init(void)
 	return 0;
 }
 
+/* Configure GPMC registers for DM9000 */
+static void gpmc_dm9000_config(void)
+{
+	enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6],
+		CONFIG_DM9000_BASE, GPMC_SIZE_16M);
+}
+
 /*
  * Routine: misc_init_r
  * Description: Configure board specific parts
@@ -144,6 +151,18 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Do board specific preperation before SPL
+ * Linux boot
+ */
+void spl_board_prepare_for_linux(void)
+{
+	gpmc_dm9000_config();
+}
+
+#endif
+
 /*
  * Routine: get_board_mem_timings
  * Description: If we use SPL then there is no x-loader nor config header
-- 
1.7.5.4