[U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC

[Marek Vasut]

Dear Amit Virdi,

> Support for designware USB device controller (UDC) exists in the u-boot for
> SPEAr platform. This patchset makes the driver more generic so that it can
> be used across multiple platforms.
> 
> V2:
>  - Configure the gadget in HS only if CONFIG_USBD_HS is defined
>  - Made local functions static in a separate commit
>  - In "Fix memory nonalignment issue" used memcpy instead of copying
>    byte-by-byte
>  - Define the HS_PACKET_SIZE unconditionally
> 
> V1:
>  - Added support for designware UDC in a more generic way
> 
> Amit Virdi (1):
>   USB:gadget:designware Make locally used functions static
> 
> Shiraz Hashim (1):
>   USB:gadget:designware Fix memory nonalignment issue
> 
> Vipin KUMAR (3):
>   USB:gadget:designware USB device controller (UDC) implementation
>   USB:gadget:designware Device controller bugfixes
>   USB:gadget:designware Support high speed
> 
>  drivers/serial/usbtty.h                            |    4 +-
>  drivers/usb/gadget/Makefile                        |    2 +-
>  drivers/usb/gadget/{spr_udc.c => designware_udc.c} |  138
> ++++++++++++------- include/configs/spear-common.h                     |  
>  4 +-
>  include/usb/{spr_udc.h => designware_udc.h}        |    7 +-
>  5 files changed, 97 insertions(+), 58 deletions(-)
>  rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (89%)
>  rename include/usb/{spr_udc.h => designware_udc.h} (98%)

Thank you for your efforts, I'll apply these.

Best regards,
Marek Vasut