[U-Boot] [PATCH V2 0/5] USB: Add support for designware UDC

[Amit Virdi]

Dear Marek,

On Wed, Mar 7, 2012 at 5:57 PM, Marek Vasut <marex at denx.de> wrote:
> Dear Amit Virdi,
>
>> Support for designware USB device controller (UDC) exists in the u-boot for
>> SPEAr platform. This patchset makes the driver more generic so that it can
>> be used across multiple platforms.
>>
>> V2:
>>  - Configure the gadget in HS only if CONFIG_USBD_HS is defined
>>  - Made local functions static in a separate commit
>>  - In "Fix memory nonalignment issue" used memcpy instead of copying
>>    byte-by-byte
>>  - Define the HS_PACKET_SIZE unconditionally
>>
>> V1:
>>  - Added support for designware UDC in a more generic way
>>
>> Amit Virdi (1):
>>   USB:gadget:designware Make locally used functions static
>>
>> Shiraz Hashim (1):
>>   USB:gadget:designware Fix memory nonalignment issue
>>
>> Vipin KUMAR (3):
>>   USB:gadget:designware USB device controller (UDC) implementation
>>   USB:gadget:designware Device controller bugfixes
>>   USB:gadget:designware Support high speed
>>
>>  drivers/serial/usbtty.h                            |    4 +-
>>  drivers/usb/gadget/Makefile                        |    2 +-
>>  drivers/usb/gadget/{spr_udc.c => designware_udc.c} |  138
>> ++++++++++++------- include/configs/spear-common.h                     |
>>  4 +-
>>  include/usb/{spr_udc.h => designware_udc.h}        |    7 +-
>>  5 files changed, 97 insertions(+), 58 deletions(-)
>>  rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (89%)
>>  rename include/usb/{spr_udc.h => designware_udc.h} (98%)
>
> Thank you for your efforts, I'll apply these.

Thanks.

Regards
Amit Virdi