[U-Boot] Pull request: u-boot-arm/master

Wolfgang Denk wd at denx.de
Sat Mar 3 15:09:40 CET 2012


Dear Albert ARIBAUD,

In message <4F4BE62C.1000402 at aribaud.net> you wrote:
> Hi Wolfgang,
> 
> The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5:
> 
>    Merge branch 'master' of git://git.denx.de/u-boot-microblaze 
> (2012-02-26 22:17:40 +0100)
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-arm master
> 
> Aneesh V (1):
>        armv7: omap3: leave outer cache enabled
> 
> Chase Maupin (1):
>        am33xx: ddr_defs.h: Change DDR timings
> 
> Daniel Gorsulowski (2):
>        at91: modified NAND flash timing on meesc board
>        at91: modified NAND flash timing on otc570 board
> 
> Detlev Zundel (1):
>        mcx: Enable command line editing
> 
> Eric Nelson (6):
>        mx6q: define GPIO macros for translating between ordinals and 
> port:index
>        mxc_spi: move machine specifics into CPU headers
>        mx6q: Add support for ECSPI through mxc_spi driver
>        mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
>        mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
>        mx6q: mx6qsabrelite: Conditionally define macros for environment 
> in serial flash
> 
> Fabio Estevam (7):
>        mx53loco: Use gpio_direction_input prior to gpio_get_value
>        mx53ard: Use gpio_direction_input prior to gpio_get_value
>        mx53evk: Use gpio_direction_input prior to gpio_get_value
>        mx53smd: Use gpio_direction_input prior to gpio_get_value
>        mx51evk: Use gpio_direction_input prior to gpio_get_value
>        mx35: generic: Let get_reset_cause be defined only when 
> CONFIG_DISPLAY_CPUINFO is selected
>        mx35pdk: Remove duplicate CPU revision and reset cause information
> 
> Hadli, Manjunath (3):
>        davinci: cleanup davinci_sync_env_enetaddr() fucntion
>        da850evm: add support to read mac address from SPI flash
>        da850evm: read mac address from I2C EEPROM on AM18x EVM
> 
> Helmut Raiger (3):
>        tt01: fix environment size
>        tt01: add video support
>        tt01: fix hush parser config, add release config
> 
> Linus Walleij (3):
>        integrator: stop calling pci_init() twice
>        integrator: rewrite the AP PCI driver
>        integrator: update the Integrator/CP config
> 
> Marek Vasut (2):
>        i.MX28: Fix VDDIO and VDDA setup
>        MX28: Fix get_timer() / get_tbclk() issue
> 
> Matthias Fuchs (4):
>        mx28evk: add RTC support
>        mx28evk: add USB support
>        mx28evk: add SPI support
>        mx28: fix SPL code to make USB booting work
> 
> Peter Meerwald (1):
>        beagle: enable DVI_PUP
> 
> Shawn Guo (1):
>        common/image.c: align usage of fdt_high with initrd_high
> 
> Stefano Babic (4):
>        MX35: add missing get_ticks() and get_tbclk()
>        MX31: add missing get_tbclk()
>        MX5/MX6: add missing get_ticks() and get_tbclk()
>        MX27: add missing get_tbclk()
> 
> Thomas Weber (2):
>        Tricorder: Switch env to generic mmc driver
>        OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL
> 
> Tom Rini (2):
>        am335x_evm: Change MAINTAINERS entry
>        omap3_beagle: Change MAINTAINERS entry
> 
> Troy Kisky (5):
>        net: fec_mxc: add 1000 Mbps selection
>        net: fec_mxc: add PHYLIB support
>        net: phy: add support for Micrel's KSZ9021
>        net: phy: make board_phy_config responsible for calling drv->config
>        i.mx6q: mx6qsabrelite: Update the network configuration
> 
> prabhakar.csengg at gmail.com (1):
>        dm6467Tevm: Use a common configuration file for davinci_dm6467evm 
> and davinci_dm6467Tevm
> 
>   MAINTAINERS                                   |   10 +-
>   README                                        |    8 +
>   arch/arm/cpu/arm1136/mx31/timer.c             |    9 +
>   arch/arm/cpu/arm1136/mx35/generic.c           |    2 +-
>   arch/arm/cpu/arm1136/mx35/timer.c             |  103 +++--
>   arch/arm/cpu/arm926ejs/davinci/cpu.c          |    2 +-
>   arch/arm/cpu/arm926ejs/davinci/misc.c         |    9 +-
>   arch/arm/cpu/arm926ejs/mx27/timer.c           |    5 +
>   arch/arm/cpu/arm926ejs/mx28/spl_power_init.c  |   16 +-
>   arch/arm/cpu/arm926ejs/mx28/start.S           |   21 +-
>   arch/arm/cpu/arm926ejs/mx28/timer.c           |   19 +-
>   arch/arm/cpu/armv7/imx-common/timer.c         |   75 +++-
>   arch/arm/cpu/armv7/omap3/board.c              |    2 +-
>   arch/arm/include/asm/arch-am33xx/ddr_defs.h   |    2 +-
>   arch/arm/include/asm/arch-mx31/imx-regs.h     |   27 ++
>   arch/arm/include/asm/arch-mx31/sys_proto.h    |    1 +
>   arch/arm/include/asm/arch-mx35/imx-regs.h     |   25 +
>   arch/arm/include/asm/arch-mx5/imx-regs.h      |   30 ++
>   arch/arm/include/asm/arch-mx6/imx-regs.h      |   49 ++
>   board/armltd/integrator/integrator.c          |    3 -
>   board/armltd/integrator/pci.c                 |  582 
> ++++++++++++++-----------
>   board/armltd/integrator/pci_v3.h              |  200 +++++++++
>   board/davinci/da8xxevm/da850evm.c             |  103 +++++
>   board/davinci/dm6467evm/dm6467evm.c           |    2 +-
>   board/esd/meesc/meesc.c                       |    8 +-
>   board/esd/otc570/otc570.c                     |    8 +-
>   board/freescale/corenet_ds/eth_p4080.c        |    2 +
>   board/freescale/mpc8544ds/mpc8544ds.c         |    2 +
>   board/freescale/mx28evk/iomux.c               |    8 +
>   board/freescale/mx28evk/mx28evk.c             |    7 +
>   board/freescale/mx35pdk/mx35pdk.c             |   27 +--
>   board/freescale/mx51evk/mx51evk.c             |    2 +
>   board/freescale/mx53ard/mx53ard.c             |    2 +
>   board/freescale/mx53evk/mx53evk.c             |    2 +
>   board/freescale/mx53loco/mx53loco.c           |    2 +
>   board/freescale/mx53smd/mx53smd.c             |    1 +
>   board/freescale/mx6qsabrelite/imximage.cfg    |    2 +-
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   68 ++--
>   board/hale/tt01/tt01.c                        |   21 +
>   board/ti/beagle/beagle.c                      |   34 ++
>   boards.cfg                                    |    8 +-
>   common/image.c                                |   12 +-
>   drivers/net/fec_mxc.c                         |  165 +++++---
>   drivers/net/fec_mxc.h                         |    7 +
>   drivers/net/phy/micrel.c                      |   87 ++++
>   drivers/net/phy/phy.c                         |    5 +-
>   drivers/spi/mxc_spi.c                         |   93 +----
>   include/configs/davinci_dm6467Tevm.h          |  167 -------
>   include/configs/davinci_dm6467evm.h           |    1 -
>   include/configs/integratorap.h                |  148 +------
>   include/configs/integratorcp.h                |   47 +--
>   include/configs/mcx.h                         |    7 +-
>   include/configs/mx28evk.h                     |   64 +++-
>   include/configs/mx6qsabrelite.h               |   31 ++-
>   include/configs/omap3_overo.h                 |    4 -
>   include/configs/tricorder.h                   |   12 +-
>   include/configs/tt01.h                        |   40 ++-
>   include/micrel.h                              |   16 +
>   include/phy.h                                 |    1 +
>   59 files changed, 1495 insertions(+), 921 deletions(-)
>   create mode 100644 board/armltd/integrator/pci_v3.h
>   delete mode 100644 include/configs/davinci_dm6467Tevm.h
>   create mode 100644 include/micrel.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wisdom is one of the few things that looks bigger the further away it
is.                               - Terry Pratchett, _Witches Abroad_


More information about the U-Boot mailing list