[U-Boot] [PATCH v2 05/19] arm/km: fix wrong comment in SDRAM config for mgcoge3un

[Valentin Longchamp]

From: Holger Brunck <holger.brunck at keymile.com>

Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
cc: Gerlando Falauto <gerlando.falauto at keymile.com>
cc: Prafulla Wadaskar <prafulla at marvell.com>
---
 board/keymile/km_arm/kwbimage-memphis.cfg |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg
index 2faaf2b..6df2ad7 100644
--- a/board/keymile/km_arm/kwbimage-memphis.cfg
+++ b/board/keymile/km_arm/kwbimage-memphis.cfg
@@ -149,7 +149,7 @@ DATA 0xFFD01424 0x0000F17F	#  DDR Controller Control High
 DATA 0xFFD01428 0x00084520	# DDR2 SDRAM Timing Low
 # bit3-0  : 0000, required
 # bit7-4  : 0010, M_ODT assertion 2 cycles after read
-# bit11-8 : 1001, M_ODT de-assertion 5 cycles after read
+# bit11-8 : 0101, M_ODT de-assertion 5 cycles after read
 # bit15-12: 0100, internal ODT assertion 4 cycles after read
 # bit19-16: 1000, internal ODT de-assertion 8 cycles after read
 # bit31-20: 0   , required
-- 
1.7.1