[U-Boot] [PATCH 2/2] mx28evk: Add a README file

[Marek Vasut]

Dear Fabio Estevam,

> Add a README file for mx28evk board.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Acked-by: Marek Vasut <marex at denx.de>

> ---
>  doc/README.mx28evk |   29 +++++++++++++++++++++++++++++
>  1 files changed, 29 insertions(+), 0 deletions(-)
>  create mode 100644 doc/README.mx28evk
> 
> diff --git a/doc/README.mx28evk b/doc/README.mx28evk
> new file mode 100644
> index 0000000..c6c3d37
> --- /dev/null
> +++ b/doc/README.mx28evk
> @@ -0,0 +1,29 @@
> +FREESCALE MX28EVK
> +==================
> +
> +Supported hardware: only MX28EVK rev D is supported in U-boot.
> +
> +Files of the MX28EVK port
> +--------------------------
> +
> +arch/arm/cpu/arm926ejs/mx28/	- The CPU support code for the Freescale
> i.MX28 +arch/arm/include/asm/arch-mx28/	- Header files for the Freescale
> i.MX28 +board/freescale/mx28evk/	- MX28EVK board specific files
> +include/configs/mx28evk.h	- MX28EVK configuration file
> +
> +Jumper configuration
> +---------------------
> +
> +To boot MX28EVK from an SD card, set the boot mode DIP switches as:
> +
> +   * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
> +   * JTAG PSWITCH RESET: To the left (reset enabled)
> +   * Battery Source: Down
> +   * Wall 5V: Up
> +   * VDD 5V: To the left (off)
> +   * Hold Button: Down (off)
> +
> +Follow the instructions from doc/README.mx28_common to generate a bootable
> SD +card.
> +
> +Insert the SD card in slot 0, power up the board and U-boot will boot.

Best regards,
Marek Vasut