[U-Boot] [PATCH] sh: Fix building ecovec board

[Nobuhiro Iwamatsu]

Hi,

2012/3/21  <phil.edworthy at renesas.com>:
> Hi Nobuhiro,
>
>
>
>> I cannot reproduce this problem. I am using gcc-4.6 and gcc-4.4.
> I used the CodeSourcery G++ Lite 4.4-200 toolchain.
>
>
>> And I think that this problem is not revised with your patch.
>> I think that the contents of the patch are right.
> My change makes the ecovec Makefile the same structure as the other SH
> boards.
>
> I checked and found that the build error only occurs with out-of-tree
> builds.

OK, I confirmed this with out-of-tree build.
Applied.

Thanks.
  Nobuhiro


>
>
>> 2012/3/17 Phil Edworthy <phil.edworthy at renesas.com>:
>> > Build error was with board/renesas/ecovec/lowlevel_init.S
>> > include/version.h: Assembler messages:
>> > include/version.h:41: Error: unknown opcode
>> > lowlevel_init.S:48: Error: unknown opcode
>> > lowlevel_init.S:51: Error: unknown opcode
>> > etc
>> >
>> > Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
>> > ---
>> >  board/renesas/ecovec/Makefile |    8 ++++++--
>> >  1 files changed, 6 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/board/renesas/ecovec/Makefile
>> > b/board/renesas/ecovec/Makefile
>> > index 8fdc0c9..b592a9c 100644
>> > --- a/board/renesas/ecovec/Makefile
>> > +++ b/board/renesas/ecovec/Makefile
>> > @@ -25,8 +25,12 @@ LIB = $(obj)lib$(BOARD).o
>> >  COBJS   := ecovec.o
>> >  SOBJS   := lowlevel_init.o
>> >
>> > -$(LIB): $(obj).depend $(COBJS) $(SOBJS)
>> > -               $(call cmd_link_o_target, $(COBJS) $(SOBJS))
>> > +SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
>> > +OBJS   := $(addprefix $(obj),$(COBJS))
>> > +SOBJS  := $(addprefix $(obj),$(SOBJS))
>> > +
>> > +$(LIB): $(OBJS) $(SOBJS)
>> > +               $(call cmd_link_o_target, $(OBJS) $(SOBJS))
>> >
>> >
>> >  #########################################################################
>> >
>> > --
>> > 1.7.0.4
>> >
>
> Best regards,
> Phil



-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6