[U-Boot] [PATCH 10/14] CMD: Remove CMD_MEM and CMD_LOOPW, they're unused

[Anatolij Gustschin]

Hi Marek,

On Sat, 31 Mar 2012 19:47:15 +0200
Marek Vasut <marex at denx.de> wrote:

> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
>  README |    7 -------
>  1 files changed, 0 insertions(+), 7 deletions(-)
> 
> diff --git a/README b/README
> index c98afa7..0ebe877 100644
> --- a/README
> +++ b/README
> @@ -3379,10 +3379,6 @@ Low Level (hardware related) configuration options:
>  		and crc32 is the correct crc32 which the
>  		area should have.
>  
> -- CONFIG_LOOPW
> -		Add the "loopw" memory command. This only takes effect if
> -		the memory commands are activated globally (CONFIG_CMD_MEM).

Please, no. CONFIG_LOOPW is used if CONFIG_CMD_MEMORY is defined. This
text should be fixed instead: s/CONFIG_CMD_MEM/CONFIG_CMD_MEMORY/

Also it probably makes sense to change CONFIG_LOOPW to CONFIG_CMD_LOOPW
since this configures an U-Boot command.

Same for CONFIG_MX_CYCLIC.

...
> @@ -3394,9 +3390,6 @@ Low Level (hardware related) configuration options:
>  		=> mwc.l 100 12345678 10
>  		This command will write 12345678 to address 100 all 10 ms.
>  
> -		This only takes effect if the memory commands are activated
> -		globally (CONFIG_CMD_MEM).
> -

Same applies here.

Thanks,
Anatolij