[U-Boot] U-Boot/IXP
Marek Vasut
marex at denx.de
Mon Mar 5 21:15:16 CET 2012
Dear Michael Schwingen,
> Am 03/05/2012 12:54 PM, schrieb Marek Vasut:
> > Dear Michael Schwingen,
> >
> >> On Mon, Mar 05, 2012 at 02:14:56AM +0100, Marek Vasut wrote:
> >>> Dear Michael Schwingen,
> >>>
> >>> do you still intend to maintain IXP support in uboot or can all those
> >>> IXP boards be removed? I'd be great if you helped bringing them back
> >>> in-line!
> >>
> >> I still use them and would want to keep these boards (and maintain
> >> them).
> >>
> >> I only glimpse at the mailing list from time to time - are there any
> >> open problems with these boards that need to be addressed?
> >
> > No, I just cannot compile it with usual arm-linux-gnueabi- toolchain and
> > that puts a bleep on my bug-radar. Is that normal? Do I need a special
> > toolchain?
>
> I am using an old, locally built toolchain that identifies itself as
> gcc version 4.3.4 (crosstool-NG-hg_default at 1471_4a88cb9bfe8f)
>
> I can take a look at this using a newer toolchain - however, I am in the
> process of moving, so this will probably take some weeks.
>
> What prebuilt toolchain should I try?
I was more curious if it's possible for me myself to build these. And if so, can
that be done with usual arm-linux-gnueabi- toolchain? Or do I need special armeb
toolchain compiled in some special way?
>
> cu
> Michael
Best regards,
Marek Vasut
More information about the U-Boot
mailing list