[U-Boot] [GIT PULL] Update - Pull request: u-boot-imx

[Albert ARIBAUD]

Hi Stefano,

Le 27/03/2012 09:46, Stefano Babic a écrit :
> Hi Albert,
>
> please pull from u-boot-imx (rebased on current u-boot-arm).
>
> The following changes since commit cd207cde948ecf9ff50a0fa1ae2650f65579c9c9:
>
>    IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-26 23:09:26 +0200)
>
> are available in the git repository at:
>    git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
>        imximage: Remove overwriting of flash_offset
>
> Eric Nelson (4):
>        i.MX6: mx6qsabrelite: add ext2 support
>        mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
> allow use for environment
>        i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
>        i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
>
> Fabio Estevam (15):
>        mx51evk: Fix CONFIG_SYS_MEMTEST_END
>        mx53evk: Fix CONFIG_SYS_MEMTEST_END
>        mx53smd: Fix CONFIG_SYS_MEMTEST_END
>        efikamx: Fix CONFIG_SYS_MEMTEST_END
>        mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>        mx6: Fix reset cause for Power On Reset case
>        mx6: Remove duplicate definition of ANATOP_BASE_ADDR
>        pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
>        mxs_spi: Return proper timeout error
>        mx6: Read silicon revision from register
>        USB: ehci-mx6: Add proper IO accessors
>        mx28evk: Provide default values for SPI bus and chip select
>        configs: imx: Use CONFIG_SF_DEFAULT_CS
>        mx53: Make PLL2 to be the parent of UART clock
>        mx53ard: Initialize return code with error
>
> Helmut Raiger (1):
>        mx31: add "ARM11P power gating" to get_reset_cause
>
> Marek Vasut (3):
>        i.MX28: Enable additional DRAM address bits
>        i.MX28: Make the stabilization delays shorter
>        i.MX28: Drop __naked function from spl_mem_init
>
>   arch/arm/cpu/arm1136/mx31/generic.c           |    2 +
>   arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c    |   12 +--
>   arch/arm/cpu/arm926ejs/mx28/spl_power_init.c  |    8 +-
>   arch/arm/cpu/armv7/imx-common/cpu.c           |   25 ++++-
>   arch/arm/cpu/armv7/mx5/lowlevel_init.S        |   20 +++-
>   arch/arm/cpu/armv7/mx6/soc.c                  |    8 ++-
>   arch/arm/include/asm/arch-mx6/imx-regs.h      |  143
> ++++++++++++++++++++++++-
>   board/freescale/mx53ard/mx53ard.c             |    2 +-
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   13 ++-
>   drivers/misc/pmic_i2c.c                       |    6 +
>   drivers/spi/mxs_spi.c                         |    6 +-
>   drivers/usb/host/ehci-mx6.c                   |   13 +--
>   include/configs/efikamx.h                     |    4 +-
>   include/configs/m28evk.h                      |    2 +-
>   include/configs/mx28evk.h                     |    2 +
>   include/configs/mx31pdk.h                     |    2 +-
>   include/configs/mx51evk.h                     |    2 +-
>   include/configs/mx53evk.h                     |    2 +-
>   include/configs/mx53smd.h                     |    2 +-
>   include/configs/mx6qsabrelite.h               |    4 +
>   include/configs/vision2.h                     |    2 +-
>   tools/imximage.c                              |   18 +++-
>   tools/imximage.h                              |    1 +
>   23 files changed, 251 insertions(+), 48 deletions(-)

Applied to u-boot-arm/master, thanks.

Amicalement,
-- 
Albert.